Mystery crate opened- first impressions and use of the Baumalight 72 inch brush cutter in action!

Baumalight link:
baumalight.com...
C&C equipment link:
www.ccsurplus....
shop Dirt Perfect
www.dirtperfec...
Facebook
www.facebook.c...
Instagram
www.instagram....
Ariat links
• Save 10% off your first order - ariat.dkkdet.n...
• Dirt Perfect's Favorites - ariat.dkkdet.n...
Putting the new brush cutter to work!
#Baumalight
#brushcutter
#attachments
#skidsteer
#landclearing

[@C_CEQUIPMENT]

Nice cutters for sure We have these units in stock on our website

[@DirtPerfect]

www.ccsurplus.com/inventory/?/listing/for-sale/214976209/2022-baumalight-cf572-m550-other-attachments?dlr=1&accountcrmid=1690271&settingscrmid=1690271

[@C_CEQUIPMENT]

@@DirtPerfect thanks

[@farmerchris1]

I had plans on demoing one but I couldn’t get a skid steer to run long enough to test it out!!

[@scotthultin7769]

@@C_CEQUIPMENT do you think he's turning it into an info commercial?

[@C_CEQUIPMENT]

@@farmerchris1 sounds like kubota problems to me 😁

[@hjemison]

I’ve run brush cutters before and this looks like a good one. One suggestion though. If you overlap each pass by a quarter, you’ll get a better mulch and reduce the load on the blade. This will help when you’re cutting the big stuff.

[@billvandorn5332]

I agree and to raise the front just a little bit higher than the rear gives it a double cut and minimizes counting on the ground

[@tux1968]

I like when you compliment Matt and give him some positive feedback. Great video overall. Thanks!

[@randywilson6869]

Yea with all the joking it seems like he is holding Mat back. I mean I like to joke but to much of it can get in the way. I always told my new guys that it helps for them to ask questions about the job instead of texting their friends on the way and show up on the job then start asking

[@JCrook1028]

@@randywilson6869 You see a tiny fraction of their time together and you think you know how it is? Lmao. Hint - you have no clue. "holding Matt back" by trusting him to do the estimates and bids? "holding him back" by teaching him to run equipment? I see two guys working and joking together.

[@CMDSR]

Amazing how much better it looks around there. All Matt needs there at the end is a Moon Pie and he’ll be set.

[@dannyabston7051]

Y’all sure made that spot of ground look a lot better. Couldn’t even tell there was a pond there. Another Awesome Video

[@kylesmith8769]

I can see that brush cutter coming in real handy on clearing jobs and pond cleanup.

[@joegomez5807]

DP. We love you. Please use that beast with an enclosed cabin machine. If you allow the implement to come off of the ground, there is a chance for kickback. I have the old style bobcat brush cutter and get kickback when I cut down larger trees. I am lucky to have an enclosed T-190. Thanks for your inspiring videos!!!

[@Michael-fd8ob]

Mike if u cut forward about 10 feet then tip the front of the cutter down towards the ground and then back up it will cut the debris much finer and it will look better we call it the back drag cut. Very awesome job.

[@tuffram2165]

The travel speed loss is due to a low flow attachment. High flow would be 3x faster cutting because the attachment will not lose speed and momentum plus it recovers way faster. The best method I have found using ours cutter on our SVL95 is to keep the front of the cutter about 3" higher than the back and keep the back 3 to 4 inches off the ground if possible.

[@OldVermontGuy]

Greetings from Central NH Lakes Region - Really nice cutter, you are showcasing it well. I am constantly amazed at how smart Farmer Chris is. Between all the drain tile he put in on the various fields you have shown and doing things like pushing the usable acreage up with expansions like this he is really improving his bottom line. You have shown some of his equipment in the past so every acre he can improve yield is big bucks to the bottom line, especially in those fields with drainage issues. You are blessed with some incredible soil so when it is draining properly yields just skyrocket.

[@jamesfranks545]

That dude could benefit from a couple swivel wheels on the front corners. Help keep it out of the dirt and hold the RPMs better.

[@steptdnit9776]

Inclosed cabin is a must, we have light winters in my area. Stinging insects of all kinds will ruin your day when your brush hogging.

[@davidpayne2880]

I see a whole new expansion of the Dirt Perfect /ground clearing / tileing /all around excavating business. It sounds more and more as it the Hundyi is staying.

[@dennis2376]

Thank you and have a great day.

[@bigjohnworks1427]

great addition to the fleet. i use my brush cutter all the time. super handy.

[@jrhendershot1936]

That is a very good machine for cleaning up bad weeds and brushy areas like that and Matt operated it like a pro thanks for sharing your day with us

[@gjohnston7619]

Its good to play to each others strengths....No one person is the best at everything....You compliment each other well.

[@Biggs58]

That is an amazing brush hog. The last 3 or 4 implants you have bought and built have up you fleet of tools to the next level.

[@Roboticus_Prime_RC]

I think the "travel speed" quirk you mentioned is probably a tradeoff from the blade design. The 4 blades absolutely demolished the trees and brush in a split second. But, they are much harder to keep going in heavy grass. I bet if it had a more traditional round stump jumper and two blades, it would handle grass better. But, then you'd have to slow way down for the trees, hence tradeoff. :) Also, insert Diesel Creek's OSHA song. lol

[@heatherlane9270]

NYA MIllennial certainly seemed to do a better job - patience with learning a new item probably though. Like the ability to see what is on the ground in front. Will be a handy item for those special jobs.

[@brianherron5400]

That's a great piece of equipment for your fleet. Works well.

[@stankohl4262]

That seems to be working really well. I have one but it's a Chinese version and we needed to redesign it from the start. We use ours more for cutting the fencerows back, so I am lifting the mower up as high as the skid loader will and coming down on the tree limbs. It does an awesome job but has sticks flying everywhere so you need to be aware of who might be around you. With doing that, it does throw sticks and leaves into the cab so I need to run with my door on. I like how your shields are. Mine seems to collect a lot of trash on top of the mower and yours seems to get way less. Another awesome video that you have posted. Thank you, keep them coming.

[@DirtPerfect]

Wow did you watch the video at all

[@dirtyduck1947]

If I make make suggestion here if you were to mount a pair of small rubber ties on each front corner of that machine in a fashion so you could adjust how high you want to cut you would get awaw from the scalping problem and make the wheels so the swival!

[@chrisbeatrice1544]

Ok, nice snake chaser and tenderizer. Good fun work!

[@doclull1989]

Hey DP!! I know you bought it but I think Matt claimed it. That thing is a beast.

[@garymiller6563]

You can add more to the bottom runners or skid bars.

[@rickster9993]

Open field brush cutting yea old school, tight quarters like your cutting you got the setup. For your excavator get a rotary drum mulcher.

[@willb3018]

That brush cutter is quite the little beast. Should come in handy often. While I grew up in the country, it was a small 3 acre parcel. Mostly woods. But there was one section, about 2/3 the size of the piece you started at that would get over grown. Too small to spend money on power equipment so my dad did it with a scythe. 10 year old me was in tow with a sickle to take out the stuff close to the tree trunks. Loved my childhood but don't really miss that ...or shoveling coal into the coal bin in winter.

[@normanbeaulieu383]

You said mat doing a good job 👍

[@johnsmith-xr6qy]

First cut around the trees that need taking out and then two men can work one job at the same time. works for me.

[@johnmartin-sg7cv]

Good video. Just wish we could get this type of equipment in Australia at a reasonable price. I would buy one in a heartbeat.

[@DconBlueZ]

Thanks for the video, always enjoy watching!

[@TECHNOPADAWAN]

Love the new 'invisi-straps' you used

[@DirtPerfect]

Plan Worked thanks for the comment

[@CSmith-wn7vj]

@@DirtPerfect as soon as I noticed it. I said to myself. Yep comment generator. Let the fun begin. Lol. 👍

[@mib20000]

Thats what gravity is for - just dont drive behind him LOL

[@doclull1989]

@@DirtPerfect Aren't those the new Bluetooth edition we've been hearing about? Looks like they work great.

[@dalecherry4044]

I have the same straps. But like Dirt I keep losing them. And they are really expensive.👍👍

[@hoberghacienda2267]

Awesome piece of machinery! There's something soothing about watching a good cutter work! Great addition to your fleet!

[@jeffreykbevins7116]

I love that new brush cutter for the skid steer, that thing sure will cut . I see several people running one of these and they do not take a full width cut in bigger stuff, they only take about a 2/3 width cut and that way it does part of an overlap cut each time, making it cut some of stuff again leaving a smoother cut . And I also see people when they come up to a taller clump of brushes - trees, they run right up to them and raise the cutter high off the ground at an angle and then bring it down on top of them, grinding them down from the top down to the ground and it doesn't choke the cutter down or the power of the skid steer, till they get through the bigger stuff and then move on forward cutting away down on the ground, till the next bigger stuff and then raise it up again and grind it from the top down to the ground . That new 210 is a monster of an excavator tearing those big trees out and moving them . I love watching videos like this and how that it really changes everything leaving the area all clean and opened up . It sure made that place look different, you all did a great job . And Matt was moving right along and was doing really good with the brush cutter - skid steer coming through behind you . I would like to have a skid steer and one of those cutters, maybe some day . One of my cousins has a smaller Chinese dozer that looks a lot like an older John Deere 450 dozer and it has a 3 point hitch and PTO and we run a big bush hog on it all the time, and I run the dozer a lot bush hogging on his farm for him about 4 miles from my farm . And you can really clean up with that setup, if it's to big to bush hog, then I go to pushing it down with the blade and piling it up and sometimes I can use the bush hog to cut the tops up with and that just leaves the trunk of the trees to haul off, then smooth it up and then go back over it sometimes with the bush hog . Thanks for the video and I will see you all later on another one, so take care and stay safe working . 🤗👍💖💫

[@chrishelms1967]

210 is definitely staying in south Indiana

[@nycat7906]

hey not sure if it is too late or not but if you watch Farming Fixing and Fabrication video - J Martin Auction Viewing 2 day auction - When they pull into the auction yard to see what is there right near the beginning there is a pipe trailer like the one you are borrowing to lay the pipe with. This auction is off of ST-20 near Montezuma, NY

[@jimhus7283]

You and 18 get the GOOD toys !!!!!!!

[@charlescook7623]

I enjoy watching you work. Thank you for taking the time to film, edit, and post!

[@DirtPerfect]

Thanks for watching

[@slamsshenanigans2296]

Nice to see you give Matt a sincere compliment! 😉😊

[@JCrook1028]

Oh yea that looks like a whole lotta fun.

[@AquaPeet]

You both did a good job, look at the space that you reclaimed. Awesome!

[@jimnaz5267]

of all the brush cutters shown in action that I have seen on You Tube, this is without a doubt the best. The company should pay you for the fine demo file you created. Good video, good narration, good equipment. Thank you for sharing.

[@waynehoch3009]

I wasn't expecting it to bog down line it did.but all in all a beast.

[@rickeyburke2596]

That is one cutting machine. Pairs nicely with the skid steer.

[@marksaunders2500]

Hi from uk Mike and crews 👋👍 hood Jon getting a bit more land opened up up for Chris and the cutter looked it coped well considering you threw a few big ones in the equation once used ti it it'll be better tho cos it makes all the difference between pulling a cutter and pushing one but once get reference on the skids and their height it will be a blast to use anywhere👌 thanks for your time be safe and see you soon 👍 👋

[@Chris2580Ivy]

Is that another hint "You like to have one of those for the 210" that you are keeping the 210?

[@everestyeti]

Yep bet it's going no where! 🤣😂🤣

[@Sjanzo]

He cant break even on owning a 25 ton ADT if he has to load it with a 14 tonner... it just needs to work with a 20 ton excavator to earn its full hourly rate...

[@bones2610]

That is impressive. Well worth every penny

[@CCTOutdoorServices]

These are the type of videos that keep me going on making KZbin videos ! Much respect to ur vids 👍🏼🚨

[@doritleis2773]

Hello Mike in my Eye is the Baumalight 72 a Cutter for great hard Grass and Young Trees with a green Wood. Is not with a Mulcher to Comparable. The Fecon Black Hark is the Optimum for Clearing and Mulching. 👌👍 Greeting, 🇦🇹

[@maxmacdonald7174]

I like the unique roof on that old barn. Looks like a sturdy brush cutter.

[@Crewsy]

I was looking at it too. Especially the curved transition to the lower sloped addition.

[@dentonhoward5086]

Awesome ... thanks

[@user-kr9mh5oi1q]

Back in my day we used to have to use hedge clippers...it would take me all day to do what you did.

[@dennis2376]

And lot of pain. :)

[@alexthomson7659]

Thats some cutter hot knife through butter springs to mind

[@kellymiers4982]

your microphone really picks up the crunching of the trees by the thumb. awesome sound.

[@mcsawmill]

Those last 3 trees you took down looked like black walnut? Wish I lived by you, I could get rich!😀😀

[@arthurjennings5202]

It works swell. I really like the design of the cutter, the fence on the front of the cutter that pushes the larger stuff over and the extended blade path cuts larger stock. The chains on the back of the cutter also helps keep the brush from flying into the skid steer. Nice unit.

[@arlingtonguy54]

That sure is a lot of Tree of Heaven. That cutter works great. So satisfying to watch.

[@TheGingerGenius78]

Do Like that kind of cutter ! Nice little job should make Chris’s life easier 👍👍

[@johnmattu7262]

Nice clearing job!👍🏼 Just a helpful hint to try with the brush cutter, when you're in the deep nasty & heavy stuff, tilt the front up a foot higher than the rear. Let the rear determine your material height and the front pre-cut it and it keeps from robbing all the power cuz the whole carriage isn't in all the material bogging it down. Pluss you dig in less in the woops "think shorter wheelbase", kinda the same way you get better quality mulching when back-dragging, less dramatic up and down with the terrain.😉

[@chrissheathewoodguy]

I'm glad you said it first, yes matt is running it very well. as that's how you have to run these cutters.

[@rudyfisher7660]

To me it looks like you can put a boat through the outside of those side and put your little rope couple rolling wheels on it where it won't go too low and it's always just rides the texture of the ground about an inch and a 1/2 2" off the ground

[@tombradford6998]

finally somebody gets a light enough brush cutter that doesn't teeter totter the skid steer.

[@mib20000]

you should have got a taco-hoochi TL12V2 and the high flo brush cutter. FARMER CHRIS MUST BE A MILLIONAIRE. all these jobs you do for him

[@joshbrownncsu1]

One trick is to raise the front up in heavy stuff and it helps chop it up as you go across it vs having to go straight into it. Works really well this way for thick briars and brush, then level it out and back up to finish it off.

[@Bman2020]

That is a great company based out of Ontario here in Canada 🇨🇦 lots of attachments for servals machines DP you are right Matt was able to run that bad boy maybe a updated review in the future 👍👋🇨🇦

[@randycarpenter2914]

Seems to do a good job. I wonder if a high flow would do even better? I don't really know if high flow would keep the rpm up longer and allow more speed of travel. I watched outdoors with the Morgan's and he tested a disc type cutter it left everything clean. If my memory is right it would cut up to 6 inch trees and grind them up. He was cutting new trails in the woods. I do remember the machine had ballistic door glass to protect the operator. I think it recommended a safe distance was 300 feet from it during operation. I am impressed with the new excavator it seems to be a work horse for sure. Will be waiting for the next video for sure.

[@MrStan1221]

wow, you made quick work of that mess.

[@jandances1687]

Just what's needed with your company, different model so should be the bees knees .

[@CCTOutdoorServices]

Your one of the reasons why I started my KZbin channel 🤙🏼🔥

[@graemethompson340]

Yes Mike from my experience you give up some speed to let the cutter do the job it was designed to do, maybe some slides along the edges may help with the cut cheers for now mate

[@scottlee1211]

Oh my wait a year or two and Gunner will be clearing lots all throughout the county!!! His brush cutter and dozer in tow!! Thanks for sharing!

[@bobbeaumier8212]

My dad always said,yr no fool with the rite tool❤

[@glenniosbaker5193]

Matt is getting better and better the more he does. Looks like he found his calling.

[@paulprigge1209]

Pretty bad when you’re watching Midwest Towing we just posted and then you see this and you switch over. Lol

[@oldschoolhoosier]

Those cutters are nice and could even open the door to some profitable business from your county DOT if you had time. Your business is definitely diverse and unlimited. Great video Mike. No snakes spotted yet….lol. I’m surprised the company didn’t place spring loaded swivel wheels on the front to keep from digging in on the dips. 🧐

[@hermanschepers4739]

They sell a wheel kit for the front, ONLY $1K. DP and MBTS could probably build one for 1/2 that or less.

[@billvandorn5332]

Maybe they'll make it an option?

[@perrywarner7567]

Sweet attachment

[@robertmasters2138]

That is awesome. Cute really well

[@garymessina1609]

More new toys oh boy let's have fun 😊👍

[@liza.andkeithsimpson5081]

Congratulations mike

[@BouncingBaller]

Wow, that's impressive. The standard flow skid steer seemed to not have trouble with the brush. The unit seems to have handled even the small trees.

[@larryconley9438]

Mike that thing is huge, it looks as big as the skidsteer. That will cut some brush

[@jilldunn1041]

You pair work bloody well together and your honesty you don't talk bullshit love you both keep up the good work

[@johnnyjohnston2401]

Looking good great Job

[@PastorDavidFranklin]

Great job Mike and Matt. Nice brush-cutter making the job easier to manage.

[@philhammond5908]

Cap’n says that’s a super sized whoopa choppa !

[@busterbailey370]

That’s a great video thank you

[@joycefuller9177]

Great video, clean up, and cudos to Matt!

[@haydenuk02]

Nice bit of kit. Sure does make light weight of that brush. Brilliant work and thanks for sharing this with us take care

[@jimhines9553]

You are going to love that bulrush cutter. We have one (different manufacturer) and use it on our Bobcat clearing cedar etc…and it is a beast. From experience if you are around rocks or potentially around rocks, I recommend closing the door on the cab and upgrading to the forestry door that is made of poly. I’ve seen (on ours and others) rocks and pieces of wood fly out the front, bounce off something and bust out the door. I know of one guy that took a rock to the face and it was not pretty.

[@bensymington5550]

Very nice unit that’s a really good job

[@gayle4804]

Great machine good for the business, Most definitely does the job

[@mattphillips4260]

that is bad ass cutter right there

[@stkrrauch1]

looks like matt has more experience on the cutter he did a fine job/i was surprised he said it was his first time operating one of those

[@franksmith8184]

Brush cutting does take patience. Matt was doing great. I ran one for 6 hours one day plus many other times. Take it slow and watch your levels.

[@retrodad6864]

Great job. The damaged left track on the skidsteer looks expensive and it’s not 12 months old. Another quality vlog DP & NYA. Thanks for posting. 🇬🇧👍👍

[@Losttoanyreason]

Cool and effictive new toy yall got there. Matt certainly seems to have enjoyed himself a lot. Big transformation!

[@nothing2loud]

Nice new equipment. I have been wanting one of the stump grinders for my TYM T264. The left track on the kubota looks a little rough already.

[@MatthewJRedmond]

Very nicely done, looks like MM found his operator calling with that cutter. Also looks like one heck of a cutter and always nice to have it out front working instead of having to drive over everything with a tractor or back up everywhere you go. Though the camera isn't on your face when shoving big trees over without digging on them first DP I have to imagine a big smile on your face in that 210, not to mention the time savings from that and the cleanup efficiency. Keep up the great work my man 😁 👍

[@CCTOutdoorServices]

Your such an inspiration sir ! That is why I still keep making my own KZbin videos ! 🤙🏼