Minecraft MULTI Item Sorting System: Silent, Lagless, Easy, Expandable!

[@mysticat]

Thanks for watching and hopefully subscribing! Why not check out this Super Smelter next? kzbin.info/www/bejne/Z4StpYaDr8lmipI FIX: A lot of you are having issues with the fourth row clogging the system! Make sure you point this third row dropper at the lone hopper! I may have forgotten that clip ;-; imgur.com/a/GMyqSwS

[@slowbrah808]

When Mysticat himself wins the comment race :O

[@havelk24]

I love your content

[@HoScaleWizard]

Ok I subbed now I will go watch the super smelter :)

[@sebr5025]

Great vid Mysti! Could you make a vid on noteblock theory? I’m totally not trying to prove to my smp friends that I’m good 😉

[@hello_and_sorry7194]

Its working on minecraft pe?

[@jacksonshaw5235]

The BRAVERY of a man using a water bucket near his red stone.

[@LoathingEditor]

yeah I broke into a cold sweat every time he did it

[@novavortex7763]

@@LoathingEditor getting flash backs of it running your day huh?

[@LoathingEditor]

@@novavortex7763 Ruining my day? Mate I ruined many a day because of water flooding my Redstone! :D

[@novavortex7763]

@@LoathingEditor I feel ya.

[@professionalgamer4858]

Can someone help me with configuring the sorter? I can't figure out how to make sure certain items go in certain rows of chests.

[@isaacdavidson7985]

By the time I finish this build, I don't think I'll have any items left to store in it

[@kiyomi6568]

LITERALLY

[@clauteletuby]

Lol

[@NickMariaDoStuff]

I ran out of Iron making all the hoppers! Works well except that I must have gone wrong somewhere and items get stuck in the 4th item elevator, when viewed from the back, instead of going further along...kind of dont want to take it all apart and build it again but might need to :|

[@jayvan_]

@Tanmay Jain 4 months ago.

[@savanpanchal6060]

@@NickMariaDoStuff i have the same problem, works till the 3rd, the 4th doesn't

[@markleclair2558]

Dude the wiring diagram in the top right is pure genius. Haven't seen any other youtuber do this but man is that helpful! Take this sub!

[@mysticat]

Glad it helps! :D

[@beingoutstanding]

Agreed! Amazing, thank you for that!

[@mihael6215]

I have seen shulker craft use that schematic thing

[@eirikdegard4498]

Agree, I’am building this

[@SaturnV5V]

It helps a LOT for a clueless person like me

[@3FlowersOnTheMoon]

There is one fatal flaw in this build. The third dropper he places @ 5:50 is placed in the wrong direction. You need to place it towards the gap between the dropper columns, where the one lone hopper is gonna get placed 30 secs later. Or else the items will start infinitely looping at the third column of chests.

[@JinTonix]

tested this and you're right

[@doktureksongs7940]

Could u make screenshot of it please?

[@3FlowersOnTheMoon]

@@doktureksongs7940 It seems Mysticat has picked up on the mistake and put a screenshot of the fix in his pinned message.

@@3FlowersOnTheMoon THANK YOU! I realized I made a loop in that column but I rewatched this several times without realizing my mistake (because it wasn't mine)

[@riccardo7315]

Why does every items finish in the "trash" chest and not in its corresponding one?

[@Gurkewasser22]

The best thing about this is that he is in survival. Im looking forward for more like that! Edit: I would never dare to try the MLG-bucket near a redstone contraption

[@mysticat]

i live on the edge

[@IzzyDizzy101]

I saw that and was like ohhh that'd be a shame if it lagged and the bucket didn't pick up the water

[@catalyst217]

@@mysticat I’m not even liking cuz 69 likes

[@professionalgamer4858]

Can someone help me with configuring the sorter? I can't figure out how to make sure certain items go in certain rows of chests.

[@andrejosue98]

@@professionalgamer4858 I know this is an old video, but you need to fill every chests with at least 1 item of the one you need sorted.

[@barmetler]

I've never seen a minecraft tutorial with this level of production quality. Like the cinematic shots, the shader, the voice, the diagrams of circuits, the fact that you do it in survival so that we can see it from the same perspective that we are gonna see it from, the list goes on... Also, the area that you built this in is beautiful

[@moopymeebloopy456]

couldn't have said it better myself

[@lem377]

This man is like the Bob Ross of Minecraft. It's just so soothing to watch these videos and I can't get enough of them. There's no screaming, no calling things weird names, no cringe intros, no annoying music. You deserve more subscribers than what you have.

[@mysticat]

LOL tysm!

[@daveyclapster1631]

I agreee

[@overbeb]

Just not having a crappy dubstep intro yelling at me to subscribe, smash the like button and click the bell is enough for me to subscribe.

[@monochromeart7311]

so a liar deserves more subs? ok....

[@lem377]

@@monochromeart7311 What do you mean by that..?

[@Flaming_Pulsar]

Love this tutorial. Very helpful. One thing I did notice though while trying it is that the top-leftmost dropper on the right side of the split in item elevators in the back needs to be pointed to the left to carry the items to the other five towers otherwise they just loop through that tower

[@strykr_killr]

Yeah I noticed that too

[@SavaninStar]

Thank you! Safed my day.

[@Flaming_Pulsar]

@@SavaninStar yeah, I'm building 28 of these for my super storage system so I needed to make sure one module would worked before I duplicate it incorrectly

[@mamsaringat]

Thanks so much for this! I was wondering what I did wrong @.@

[@minkberg1096]

You're a lifesaver, couldn't figure out why half of the storage didn't do anything. Thanks mate!

[@ellefleming455]

Just tested this on a paper 1.20 server and it works perfectly still :)

[@AofCastle]

You know the build is complex when a Mysticat video is over 10 minutes

[@mysticat]

LOL

[@chandrahasreddy1729]

Yes lol it's too complex and needs tons of iron.. which I don't have even 5

[@axolotl5475]

Chandrahas reddy iron farm

[@chandrahasreddy1729]

@@axolotl5475 in bedrock it needs 20 villagers which I don't have

[@burneraccounthandle]

@@chandrahasreddy1729 get them instead of complaining

[@luftwaffeltv428]

I almost gave up on it. Had several issues and according to the comments many others made the same mistakes i did. So here is a summary of them all. 1. I placed the observer at the end of the input line facing the wrong way. That's why items got stuck in the first dropper elevator 2. The top dropper facing the wrong way. Like mysticat describes in the pinned comment. That's why items keep looping in the 4th dropper row. 3. One repeater on the bottom redstone circuit was facing the wrong way. Because of this every item went to the overflow chest instead of the normal chests 4. Had a line of 3 tick repeaters facing the observers instead of the hoppers/blocks. Not sure what problems that would have caused since I still had the repeater on the bottom circuit wrong. Hope that helps some of you guys

[@saltnsweeties9902]

ill admit im aweful with redstone and this might not have been a great first project. im having trouble getting the items to automatically leave the first dropper. i put a buttoon on it to force the items, but then the just get stuck in the third dropper and the button doesnt help with forcing items on the third dropper. i know its been many months, but if you have any advice id be very grateful

[@luftwaffeltv428]

@@saltnsweeties9902 I am aweful at redstone aswell. So i ended up installing Fabric and Litematica, found a world download from mysticat on a website but that one is with shulkerboxes and the the wrong facing hopper on row 4. but if you want i make a world download of my working sorter. That way you can find out where you went wrong.

[@saltnsweeties9902]

@@luftwaffeltv428 i ended up tearing it down and rebuilding it. Turns out i was using glowstone lamps as my light block and they allow redstone signals to do funky things which caused my machine to not work. Tldr; i rebuilt it and it works great

[@luftwaffeltv428]

@@saltnsweeties9902 ahhh. Quasi-connectivity was the problem... another thing i dont understand, but as far as i know thats only a java thing

[@taylorbrown6746]

i got 6 minutes into this and thought “well, surely the sorter is almost done!” and there was still 10 more minutes i’m going to take a nap

[@taylorbrown6746]

great video tho!! your tutorials are always so easy to follow

[@mysticat]

@@taylorbrown6746 Glad to hear! Thanks!

[@jollyminer7241]

Built this sorter today and it works, but the FIX mentioned above is needed. Good and clear video. Thank you.

[@robboss7083]

you are so underrated >:(( you're so good at commentating and explaining everything you're doing

[@mysticat]

:D tysm!

[@Eva-bb2gx]

Yeah I recan he should have like 1mill subs

[@grammus8125]

YO MYSTICAT you’ve been mentioned from keralis and he build this sorting system

[@glidersuzuki5572]

This is not his design. It has been made earlier. I guess by rapscalion

[@tekmogm5979]

@@glidersuzuki5572 Gnembon actually

[@glidersuzuki5572]

@@tekmogm5979 no. Original concept by shildifreak and improved upon by metamilo, rapscalion and rifterslab.

[@thecpt6265]

@@glidersuzuki5572 no bro, the person who made this was Gnembon, in 2017, 3 years ago.

[@tekmogm5979]

@@glidersuzuki5572 Shildifreak's design is a different one, and Rapscallion and Metamillo's is different too. Rifterslab seems to not exist

[@mikaelahill5554]

If your items get stuck in the first hopper: Follow the graph shown at 10:30 in the corner. He forgets to put redstone torches on the solid blocks above the first jack'o'lantern in the actual video, but they're shown here in the graph.

[@rickardsundin326]

I had the same issue that I have seen a few other struggling with, that the sorter only works for one item at a time, and if you put 2 or more items in, they will get stuck in the first dropper. Turns out that I had the observer of the leftmost item elevator facing the wrong direction! It is the one being placed at 12:18 in the video. I switched it to have the face upwards, and now it works like a charm! A really lovey build!

[@MrMozzy]

Oh my lord, thank you! I never would've caught that mistake if it wasn't for you. Much appreciated! :D

[@jonathanbech-elgaard7316]

Thank you so much! I’ve been rebuilding three times, couldn’t figure out what went wrong😅

[@skischweiz123]

you´re a god damn genious

[@TomasVarnik]

Now it's working like it's supposed to. There's a small mistake in this design, where items get stuck in a loop in the third line of droppers from the right. Look for a comment by Elisa S where she explains the fix, along with a reference image for the fix. Other than that small issue, awesome design!

[@JorisDek66]

Did you just removed that second hopper? This doesnt fix my looping problem. Any suggention?

[@TomasVarnik]

@@JorisDek66 I did just like Elisa's image, but I didn't remove anything, just changed orientation. Now it won't loop, and everything goes into corresponding chest

[@NevoDay]

I can't find the comment can you please send it here?

[@GraphiteHelix]

@@TomasVarnik I'm having the same issue and I'm having trouble finding Elisa S's comment. Even resorted to using the Find/Ctrl+F command, still nothing...lol. Can you re-post it here?

[@TomasVarnik]

​@@GraphiteHelix ​ @Lucifer I don't think it's necessary now, because the first comment by mysticat (pinned) has the solution to the error and an image link. That should help

[@tedcart226]

just built this in bedrock (creative mode) and found out droppers can activate from "quasi-connectivity" ONLY IN JAVA (that's how powered rails activate many of the hoppers) which means my item elevators don't work :( really wish youtubers would clarify when builds aren't compatible with one version or another - especially on a channel this well produced!! Ghaaa!!! I want to build practically everything on this channel but now I'm afraid most of your designs won't work in bedrock!

[@ikeepseeingyou6715]

I maybe late, but damn that wiring diagram everytime he does the redstone looks sick and the editing is flawless ur a great youtuber you even skip 1 minute intros haha

[@dylanrafael9174]

Does it still work in 1.17?

[@micahdye7215]

The classy music, the shaders, the fantastic explanations, the helpful diagrams, there’s nothing bad about this video. THIS is the MOST PERFECT redstone tutorial I’ve ever seen in my entire life. That’s an instant sub right there

[@Chfrchko-144]

Where's mistake in upper hopper level. You need to build 3 hoppers in the left direction (add one defore chests and move another two left). Else loot would be cycling around 3rd chest column

[@gamesbychris]

Thank you so much for building in survival!! It’s so frustrating when people give build instructions while showing in creative, flying around.. but expect you to follow along while in survival... Thank you!

[@jakeessner5079]

Really like the new info graphics in the top right corner. Very helpful.

[@mysticat]

Thanks! They're usually at the top left, but I like this better

[@jakeessner5079]

@@mysticat I didn’t realize that they were there. I started a survival world and have been building the slime farm and villager trading hall from your playlist. You really deserve more subscribers.

[@tungdungiini4738]

I'm in the process of building a giant non-multi item sorter because when I was starting with building, I couldn't find any good multi-item sorter designs. And now, when I'm like 2/3 done with my sorting system, this genius design pops up in my recommendations. It's a bit depressing knowing that this design would be much better to build but also that I have already spent way too much time working on my non-multi item sorter so if I wanted to rebuild it, the time spent would go to waste.

[@TejasRichard]

Don't buy into the sunk cost fallacy.

[@jamajsky_bob]

Thank you, I was searching a lot for a big automatic storage system, this is exactly that i need ... I'm using a lot of builds from you in my survival world and everything works perfect ... thank you and keep up doing this

[@mysticat]

Awesome! Glad to hear it!

[@MoleTaker420]

As long as you follow the tutorial exactly and very carefully, this still works perfectly fine in 1.19. You do however need to make sure you do the fix mentioned in the pinned comment above. Built this in my survival world it is super compact and reliable as long as its built and used correctly :)

[@kirstyedwards8975]

Do you have any idea why my observer won't face the right way with the dot facing to repeater? The dot keeps facing upwards no matter what I do? Sorry for commenting on your comment, wasn't sure if anyone would see my question

[@MoleTaker420]

@@kirstyedwards8975 you're too close to the repeater and/or are placing the observer on the ground, not the repeater. Stand as far back as possible while being able to reach and point your mouse at the side of the repeater. Shift click place. Boom it should be facing the repeater now

[@MoleTaker420]

I may have said that backwards it's been awhile and I'm not going to rewatch the video. If the dots facing the wrong way still, do what I said but on a block opposite from the repeater so it's facing the other way if that makes sense

[@kirstyedwards8975]

Thankyou, I have to get rid of the hoppers behind me and re do them in order to step far enough away! Thanks so much!

[@jakeb7124]

Does this work in the latest update of 1.20

[@pigeonmalin2321]

If i understood it right, you can make that smaller/taller in height by removing layers of observer+rails and redstone torch towers and copy the same thing horizontally by changing the chest input chest by the hopper at the end. I just want to make this 3 chest high and very long...

[@77Brainfreeze]

Depending on how much work you want to put into it, you might want to check out Rapscallion's design kzbin.info/www/bejne/rGiZanyulrB_epY . It's much more complicated but in the end you don't have to worry about keeping all of the chests full.

[@benbehindert]

I want the same, just a simple 3x3 Storage System which is completely automatic. Why is there no tutorial for it??

[@a_random_tire]

1:03 this is genius, I usually have to pause and rewind bits like that, but that graph thing really helps, I love mysticat tutorials, they may now cover everything, but if i have the option, I will always take it

[@majorlydifferent771]

These tutorials are really helping me understand Redstone. One thing that might make them even better is each section you do you also explain what this does in the redstone contraption. For instance the Hopper stallers, I think explaining what those do might make the videos better!

[@erikablue3757]

I personally disagree, but only if you mean in the same video as the tutorial. The reason I love his tutorials is how straight to the point they jump into me being able to just do the build. He makes what most youtubers would take a 30 minute video into a 5 or 10 minute video. I think he'd be really great at teaching and explaining the theory behind it but it would be better as a separate series to me.

[@M4XD4B0ZZ]

So can you explain which repeaters I have to change for the hoppers to stall longer? Every item just goes to the overflow chest

[@yannickrrr2]

10:05 Duude my heart.. its 3:25am now im sitting so strait in my chair xD

[@loyal]

yessss boutta make this rn while im taking a break off yt lmaoo

[@dhpug3014]

Can I have a shoutout please

[@phoenix_mike]

The tutorial is insane with the instructions in the top corner

[@Aleblanco1987]

Gnembom is a wizard, this is one of the most complicated item sorters i've seen (cubfan's xibalba wins I think). I don't think I have the patience to build something like this but the video was great!

[@TechnoBacon55]

Previously I built Tango's multi item sorter. That one is even more difficult than this, and takes up a lot more space. This is just pure genius and believe it or not, very player friendly:D

[@rjamsbury1]

Take a look at cubicmetre or rapscallion if you want your mind blown...

[@_purejosh]

I wish there was more explanation regarding where items go, how they travel, and what's the logic behind the system. Just for future reference. It's great that you show us how to build it, but understanding the system is what makes us learn the redstone, not just copying blocks from you. 🙂

[@TomasVarnik]

It's because he's just making a block-by-block tutorial over the gnembon's design, which can be really useful. For the long explanation about this sorter, you can check gnembon's video, linked in the description

[@LendonRyukira]

what i dont like to this type of item sorter is, we should have much item filter, as much as it's slot on a chest (or double chest, also i recommend u to double chest it the front sideway for more space, but not as beautiful as face chest in the front) what i dont like to this type of item elevator is, yes its silent. but when it's full it wont work anymore. so we should keep elevator empty. other issue is, sometime item stuck in one of dropper.. why? because its only detect the bottom dropper so it will push item and left the last stucked. so we should check sometime. those just my opinion. but thats 2 contraption are suits to this bulky storage that doesnt meet that problem so much. as best as always.. i love this informative episode, rich of trivia, tips and trick, and also corner tips, survival friendly and practically.. oh.. also resource pack helps a lot! what i learned this episode is.. a couple simple solution for reduce lag. placing composter on a hopper, and keep lightsource from blinking redstone components.. question.. if we use another block than composter. is it still work as long as the top closed?

[@mysticat]

I always fill my chests with items anyways and organize them by hand lol. Yeah, you can use anything hoppers can read on top

[@fathomless2151]

First KZbinr ever that plugged himself and made the button go from red to grey, great tutorial!

[@rigel_star]

loved this tutorial, it's very detailed, funny and well explained. Best redstone tutorial I've seen so far! You've got my sub!

[@nova_kronos4400]

Those Jack'o Lanterns blinded my eyes a little...... I should start going outside every once in a while

[@lynnong7445]

I wish you would explain how to make changes according to the amount of chest we areusing...

[@cyrelemoune1181]

I just made this sorter and I love it. Ya, forgetting torches is bad, forgot one myself so had a tick, but two people helped me out there. Love it! Just takes a while to add the stuff.

[@sebr5025]

You’ve earned my subscription Mysti! I’ve been a long time watcher but just now got a YT account! Keep on doing great!

[@mysticat]

Awesome! Welcome!

[@sebr5025]

@@mysticat hey Mysti! Could you make a tutorial on Note blocks? I think a lot of people would like it and use it! Totally not trying to impress my SMP friends 😉

[@SnowyBlizzardMC]

The cross section diagram is fantastic, I’d suggest putting the number each repeater is set to though next to it because it’s kinda hard to see tbh, and maybe even a + and - in the future if builds require subtract mode on comparators for any reason but it’s actually wonderful🙌

[@EbonNoble]

There is a mistake in the design. You need to make the top left line of hoppers 1 longer before the right facing hopper. Then move the right facing hopper 1 further forward on the 2nd row at the top. Then move the right facing hopper 1 further forward on the 3rd row at the top. Then add a right facing hopper at the very back on the 4th row. Otherwise the items get stuck in the 4th line of elevators and cycle endlessly. Otherwise this is awesome! Great video.

[@sentroid4044]

pls im having a problem that all the item is just going to the 4 dropper on the left but not going to the right one im seeing that u are explaining me but i didnt understand can u pls make a video or explain more thanks in advance

[@muniiee103]

please make a video explanation for it. Im having the same problem like sentroid.

[@javiermdq]

Look for Elisa S comment and copy the image

[@TheFiteShow]

your content is so good. so calm and chill, you're accommodating to less experienced players without being patronizing. it's so nice

[@7hamed7]

mysticat making a farm me : *vibing to the jazzy music in the background*

[@desmondfromlost]

This is surprisingly easy to follow, considering how complicated it is. First video that hasn't scared me away

[@AzureFoxen]

Me:"So how many repeaters do we need" Mysticat:"Yes."

[@ziggystardust2435]

the music made this so much better cuz i prefer jazz to lo fi or smth so thats nice, and i really like that you did it in survival so 10/10 music and 10/10 tutorial.

[@cloverberry721]

@Mysticat Two questions: 1. Can I make it shorter? Will it still work that way? 2. To make it wider, do I need to build this module multiple times, or can I increase the width and put hoppers and red stone circuitry in the same way?

[@perre4204]

got the same question

[@kiyomi6568]

i expanded it wider by using the output chest (the chest were will items go that dont have a place) and used that as a new input chest. aka all the items that go from the first storage and dont fit into the category will go into that chest. Which will act as an input chest and you can do everything from the start the same way. The only thing you wont do is the very last bit with slabs. This is the only thing you won't do. It will fit perfectly and you can place chests next to each other (i used double chests.) (no need for any borders if you dont feel like it) Btw this storage will be hugeeee

[@lachlanjones9604]

I attempted to make it shorter by a block either side, so the chest array is 7x6. I have had trouble with the red stone timing. Where built exactly the same timings, I ran into an issue where the items went straight into overflow. My closest result was making the repeater at the base of the elevator a 2 tick delay. This sorted any items that were assigned in a chest but all unassigned items went straight into overflow.

[@lewparn77777]

My heart stopped when you decided to use water by red stone. But was relieved that every time you did it, it was successful

[@dustinlsmith]

This is the first time I have ever witnessed a redstone contraption with a mute function! I am curious as to how you accomplished this? What exactly makes it silent? Love the design by the way.

[@micayladinkel1267]

the reason the items get stuck near the input chest is because the block under a certain hopper is powered and it locks the hopper so items cant go in the dropper. that is y it does not work on bedrock. but i made it on java and it works perfectly and good job mysticat.

[@ch3rry.mp4]

This was a really funny, straight-forward, and helpful tutorial! You've earned a sub.

[@mattkowalski6740]

Other than the one incorrectly placed hopper that someone found a solution to, this is by far the best item sorting system I've seen. It's very practical and CORRECTLY DOES MULTIPLE ITEMS. Like, I don't want a full chest for feathers and a full chest for flint lmao. Great job

[@clips8446]

it works in 1.20 right? cause i wana build a reliable muti sorter for storage

[@mattkowalski6740]

@@clips8446 1.20 didn't change redstone so it should work normally

[@RoxieSparks]

What hopper is incorrectly placed, I think I’m having the same problem but I’m not sure which one it is.

[@_ls547]

holy crap this video is so long compared to your usual tutorials

[@mysticat]

lol, I tried

[@rellikpd]

I'm not actually going to build this, I actually just clicked it cuz I thought it looked cool, and I've built a "multi-sorter" in previous worlds and wanted to see if yours is any different... The only reason I'm typing this comment out is to say, again, I love SOOO MUCH, how you will put little overlay diagrams of the redstone circuits and such. You are still the only person I've seen do this, and I think it's just the bee's knees

[@celinabena]

I'd love to see a multi item sorter that is smaller, for working in small spaces. I've been trying to find one that is only 4 horizontal chests high that can be extended wider, but the few designs I've found don't work in 1.16.4.

[@xxspicelord3083]

just shrink this one down, thats what i did

[@computerfan1079]

This is probably the first time I finished such a complex redstone build and actually kinda got what I was building. Also, probably the first time that it actually worked on try 1. Thanks man!

[@slowbrah808]

Witness, as many children race and argue to see who was first, when in reality, Mysty was here long before. You expected a secret, but it was I, Dio!

[@mysticat]

I WIN

[@Pallid3]

@@mysticat I won!*

[@justnot5401]

Damn you got me YOU FELL FOR IT! THUNDER CROSS SPLIT ATTACK

[@pigcake101]

@@justnot5401 works every time unless you get frozen smh

[@aydinvahdat7816]

This is like Tangos design but a million times better. Props to you

[@malachi7853]

This was a very good explanation and great vid. Very pog Also what texture pack do you use

[@mysticat]

Thanks! I use BSL shaders

[@mysticat]

and vanillatweaks.net/picker/resource-packs/

[@malachi7853]

@@mysticat thanks

[@danielmack2447]

3 years later and this still works perfectly!

[@sgmgamer2903]

@@danielmack2447 so it's good for 1.20 too , right?

[@AwesomeMr74]

my items keep on getting stuck on the 4th row from the left side facing the right side. The items get stuck in the dropper and don't get sorted, if anyone could make a video or an explanation to fix this, it would be greatly appreciated.

[@mihalyszaloki9713]

the problem is, that the dispenser on the top is facing forvard, just like the others, and if you place the dispenser on the top, in the 4rd row(the one before the gap)it has to look sideways, where the hopper is (sorry for the mistakes, i'm not good at english)

[@itsnotsam_]

@@mihalyszaloki9713 you are a legend

[@MrCalliable]

i have the same problem

[@davidalsleben8183]

@@mihalyszaloki9713 thank you, i searched so long for the mistake

[@turtle-bot3049]

@@mihalyszaloki9713 thanks for the fix. It was doing my head in trying to figure out where I went wrong with it.

[@tauryagamelive281]

the way you explain things is so calmingg

[@cocon7497]

2:06 it does matter if you place a block or redstone

[@mysticat]

oh wait, it does O_O why did I say that lol

[@LeReVaQ]

so do we do redstone or block!?

[@cocon7497]

@@LeReVaQ if you do a block the pulse is longer because it doesn't reduce the power by 1 like the redstone does... it might not matter with this design but there is a difference

[@Bklf.Leon0392]

​@@LeReVaQ block

[@yuzurubrijer4556]

I'm not even close to have the resources or the patience to build this sorting system but I watch this anyway because it's very relaxing

[@sc0rch3d]

just stumbled on this video as I'm designing my first megabase (mid game player). I have an auto tree/log farm, iron farm, gold farm and substantial quarries set up to gather redstone / quartz / etc. pretty much at will. I follow JC and Silent and build just about every starter farm they recommend and it has saved me in these more complex builds needing tremendous resources.

[@jordanz-k]

For some reason when I put items into the system every once in a while a few items skip a chest and don't go into the chest they should be sorted into. There is definitely space for them and I checked the repeater and comparator system underneath the entire system and everything seemed to be right. Any ideas?

[@GeckoEidechse]

Same here :/

[@idamakinen4521]

Same 🤔

[@ItzMattFPS]

Same

[@bretgriffiths34]

Same

[@jererocha23]

Did you figure it out?

[@jwjwjw28]

This is reliable for items colored which may not have to be sorted every time (eg. colored items, slabs, etc). And this method can be combined with regular sorting items that have to be sorted every time (eg. dirt, stone, etc). The conclusion is : Instead making more than 1000 each sorting items using a regular one, combine with this MULTI SORTING SYSTEM's could save huge spaces and time.

[@Mapleaple]

Idk if he's building a computer from raw materials or a item sorter

[@nyawul]

The secret to his power is he lives in minecraft, his whole base is his computer

[@austins.3422]

Awesome! Confirming this still works in Java 1.17.1, you just have to be patient and work through the mistakes you inevitably will make.

[@sakor1323]

Hey do you know why my items are getting stuck on the seventh hopper? The droppers aren't silent either so maybe that's why

[@josephaguirre6123]

My items are getting stuck in the bottom dropper on the first row

[@Mesaswah]

Just thought you'd like to know: I found a way to speed up the item elevator, without messing up the items in waterstreams: Put the repeater on top of the observer to 1 tick, and the repeater looping back into the torches to 3 ticks. That way the items get sent up as fast as possible, without burning out the torches. Any setting between this and the 4-tick:4-tick setting works, just at different speeds.

[@martinridao1911]

does it work on bedrock

[@Mesaswah]

@@martinridao1911 If the elevator works in bedrock, I guess speeding it up should work as well. But there's only one way to find out :)

[@varunventra5288]

Does it work on spigot or paper servers

[@kaicob1050]

This guys voice is really calming I want him to read me a story before bed like bruh

[@whatischeese6013]

I built this recently in 1.17 and mine bugged. The item got to the first dropper and didn't go up the item elevator. I checked all my redstone but nothing was wrong, do you have anything you can suggest?

[@austins.3422]

I had the same problem, I realized I put that final repeater backwards on the very bottom of the "extra dropper elevator" on the jack-o-lantern 12:10

[@kylet2237]

This happened to me too. Me repeater was backwards too, but I fixed it and it still the same. Maybe it's cause its bedrock version?

[@pewpewimanerd4595]

Its a quasi connectivity thing on those lowest back droppers, so yeah. Its a java only build.

[@slaps]

@@pewpewimanerd4595 so your telling me i really just spent 4 hrs in a survival world getting the materials to build this just to find out halfway through the build that i cant build it on bedrock. im going to kms

[@brxiii6048]

I think that I might be able to say that this is the best tutorial youtuber. On KZbin, ever

[@E.M.45471]

For me on 1.20.4 it dose not work. I did all and still all items go to the exit chest. plss help

[@E.M.45471]

ya pls for me also

[@jessiesandoval1269]

I'm addicted to storage tech, so I'm hopeful before i watch this video that it's not a storage system that your forced to leave one item in the chest, crossing my fingers, on with the video!!!!

[@rubengussinklo4638]

all my blocks are stuck in row 3 they are in a loop and if i put blocks in the chest they just ignore it and go further and go stuck in row 3 your vid is realy nice and helpfull=)

[@muniiee103]

same, looping in row 3

[@alexschramm6633]

Same here

[@alexschramm6633]

Please can somebody help with this

[@Keralis]

Just make sure that one of the top droppers faces like this: gyazo.com/eb3a5cf76b9b773d38730d5e863fa53b

[@turingberlin5346]

Fantastic tutorial. Previously I have been building this copying across from another open instance of Minecraft - this makes creating this in my survival worlds so much easier. Thanks so much.

[@d-maproductions9175]

Once I get to the fourth row of chests (the one with where your skip the red stone elevator, the items stopped going to the chests. None of my items go into chests in the 4th row

[@charlieippolito4268]

i’m having the same issue. did you ever figure it out?

[@d-maproductions9175]

@@charlieippolito4268 yes. The hopper pattern at the top in the video is wrong. He claims that there is only 2 the need to face the other way, but it has to be three. simply adjust your hoppers

[@scottishone1965]

@@d-maproductions9175 thanks i should have read comments before ripping it down and rebuilding

[@johancantplay2171]

your videos are begainer friendly when i first started to play minecraft 3 years ago i used to search for farm but all of the videos where complicated but your videos are eazy to understan keep it on champion

[@Arkesus]

Is this likely to work on bedrock edition?

[@mmsshadow9990]

If anyone watches this hope this helps copied block for block and wasn’t able to sort in items to any of the columns after the 3rd row. Which he tested. Figured it out it has to do with the hoppers on top instead of 2 diagonal it needs to be 4 diagonal starting from the 3rd dropper from the right. After that the whole thing works flawlessly

[@mantacid1221]

Just so y’all know, this wont work for bedrock.

[@braydenshannon7734]

Didn’t expect to get this recommend and don’t expect to click, or finish the video. Definitely building this on my multiplayer survival server with Tango

[@raptorking_2025]

so I made it, but for some reason all my items are getting stuck in the third row from the left. Somebody who knows about redstone help me

[@alexwardlow178]

I am having the same issue

[@alexwardlow178]

I believe I solved it by facing the third top dropper (away from the chests) face toward the 'extra' lone hopper between the columns of droppers at the top.

[@raptorking_2025]

@@alexwardlow178 thanks for your reply, and yes that was the issue. I grabbed a friend to help out, and that fixed the issue.

[@colejackson3498]

Everyone like Alex’s comment so more people see the solution

[@patriktoth10]

Thank you

[@j_nmi_crowe]

Great tutorial, thanks so much! I used barrels for fun, you can put blocks on top of them and they still open!

[@dragomitch]

I just built this in a red stone testing world and it works fine. I built it on an SMP and the first three modules works, but items keep looping in the dropper elevator before the gap. I replaced the hoppers on top and it’s still doing it, and the hoppers on that side of the module on the bottom only go in one direction. Can’t figure out the issue.

[@rubengussinklo4638]

I am on server and got the same Thing it's very annoying

[@dragomitch]

@@rubengussinklo4638 I figured out my problem, and I didn’t see it or missed it in the instructions. When you’re placing the droppers that face in on top of the item elevator, that gap where you put a hopper between the droppers where they go over to the chests, you have to turn that dropper to point into the hopper in the gap. @6:13 those hoppers that go straight across with the forward facing dropper cause the loop. Just turn that dropper towards the gap.

[@Milan125Videos]

@@dragomitch hey could you share a screenshot of what your correction looks like? im having the same issue

[@rubengussinklo4638]

Can I get in contact with you or a screen so I can understand it better If you have discord my discord code is 6982 my name on DC is Ruben77

[@dragomitch]

@@Milan125Videos I’m not sure how to share images in the KZbin comments, but at 5:50 the dropper he faces forward before the gap needs to be turned to face the gap. It’ll feed into the hopper that goes there later.

[@theseriousaccount]

Only good Minecraft tutorial channel on youtube

[@jakaria-k]

Dose this works on bedrock???

[@oliverpreston5981]

Can someone please answer this i also want to know?

[@TheDefB]

@@oliverpreston5981 Restone is vastly different so I would assume not. The best way to find out is building a single column and see if it gets the items through, then do a second one and check again, if that works then it should work

[@theplainwreck]

It does not

[@Valley-tn4ye]

i made this contraption on bedrock, doesn't work. although i'd assume you can fix this by replacing the back redstone torch tower stuff with just some observers. it works this way on java because of a bug

[@mcwhitebozz]

just found you and you are instantly my favorite youtuber for tutorials 1. you build in survival 2. the diagram 3. just a overall perfekt video

[@aleph7745]

I have a problemen. I have checked multiple times and ive done everything corrctly, but when I do the items in the chest only one shoots out and gets stuck in the 4th dropper and the rest doest even Come out

[@Elfy7x]

having the exact same issue

[@vegardtodnem6677]

Me too😭

[@whatskraken3886]

the whole mysticat character is adorable

[@Mark-fx6gl]

so if my system is longer than 8 blocks, the repeaters don't power all of the rails in the row. do I use observers every 8 blocks?

[@viktorkirilov5933]

I wanna know the same, did u figure it out?

[@Mark-fx6gl]

@@viktorkirilov5933 I ended up building this system by metamilo which has an entire help video that he made afterwards if you get stuck: kzbin.info/www/bejne/n6bCapyqZqeGgLs. if that doesn't work then here's another one: kzbin.info/www/bejne/moLaZapvjMyLmbM

[@mcchill8200]

your video tutorial seems easy to follow as you did it slowly while explaining *important* things

[@Weckacore]

I've gone through the system, it was a really great guide except I seem to have made a mistake somewhere and can't figure out where. Items don't get stuck anywhere, it's actually the opposite! I have items miss chests. the first chest in the sorter full of powered rails, one in each slot, and then nothing else in the system. Most of the rails go into the first chest but about 25% seem to skip it. Sometimes getting as far as the second column of chests. I seem to have my repeaters all at the right time but a pesky creepy interrupted my work so I fear I may need to start over

[@Weckacore]

If anyone else is an idiot like me: if you count the third hopper at the top for the input starting from the wrong side you break everything.

[@kurt-io5xi]

@@Weckacore i think i may have the same problem as you had and i dont reallly understand how you fixed it, i kow its 7 months, but maybe you still remember and can explain more complex

[@Weckacore]

@@kurt-io5xi the issue was partially highlighted in a comment. Basically a few of the hoppers that need to face to the side dont. In the top the right half should gonsidewise in a line, and similarly the bottom left

[@zachbrenner9959]

Thanks for the resources needed at the start of the video and the simple wiring diagrams as you go along. It makes it so easy to copy. I like your vids, so here's a subscription and a comment to boost community engagement