N Scale Layout Update 30 - Starting a WATER feature + NEW Girder Bridge

If you would like to support the channel:
www.paypal.me/SS454LS6
/ nscaler454
Buy some of my 3d designed models:
www.nscaler454.com
www.shapeways.com/shops/nscal...
Follow on Instagram: / nscaler454

[@Howie2025]

Great to see more progress on the layout. You’ve definitely been busy. Love the Monty Python reference 😂

[@randydobson1863]

hello Nsacler454 & it's is Randy and i like yours video is cool & Thanks Nsacler454 & Friends Randy

[@Longshadowsmodeltrees]

That is going to look real nice.

[@jasonminier6782]

Looks good! I'm doing a similar project that involves two separate rail bridges and a road bridge, and a stream converging with a small river. It was nice to see your perspective.

[@tommynorwood5184]

Hi Nscaler454 , things are coming together nicely. I do like where you are putting in the water feature. Looking forward to a scenery update . Doing scenery is more fun than wiring any day. Thanks for sharing. Have a good weekend. 😎😎 👍

[@IMRROcom]

run the freight house like you originally planned, remove the turnout for the flats. and have it a shared spur. Less turnouts is what normally would happen for a place like this. if you like the two turnouts make the short flat to the side and the long warehouse to the outside. both the flat and the trailers would unload into the same parking pad.

[@nscaler454]

I considered that, but I have a vision that I want to try and develop. We'll see how it turns out. :)

[@tomek5107]

6:47 Friend, be careful with your fingers, the blade may break when pulled out so hard. Pressing your finger against the blade in this way may cause it to break off and cut into your finger.

[@mgamga9476]

You know what is funny....I am doing almost same exact thing. Dont know if I should put a skim coat of plaster. I hope there is a follow up video to this one.

[@JohnKlos]

For the paper factory buildings, are they custom made 3D files? Or were they purchased somewhere? I like your design in the area, well thought out.

[@nscaler454]

The Paper Mill is a Walthers kit. I made full build video on it. A link can actually be seen at the end of this video.

[@gerdeguelle1967]

Noce video update

[@captainchaos3174]

Love your work N Scaler. I've also started 3D printing some of my structures. If I may ask, what resin do you use?

[@nscaler454]

Thanks. 3D printing has been so beneficial to my layout, I am sure it will be for you too. I use Elegoo water washable mostly. For bigger prints I use Siraya Tech water washable.

[@atanisoftware]

How about the odor? Is it better with the water clean resin vs IPA clean resin?

[@nscaler454]

@@atanisoftware Elegoo's water washable resin stinks. Siraya Tech's isn't bad at all. I haven't used IPA washable resin as IPA is too expensive up here in Canada.

[@atanisoftware]

@@nscaler454 I've used their IPA washed resins and they are pretty nasty as far as odor. For the IPA I've used Amazon to order it by the gallon (99%), it's impossible to find anything over 70% where I am (near Yosemite in Calif) and the 70% stuff doesn't work too well on cleaning PCBs during assembly

[@nscaler454]

@@atanisoftware I got a 4 L jug of 99% IPA from Amazon, but the shipping was $25 alone.

[@jeffreyconnors8782]

You sell the bridge ???😮id love one !

[@nscaler454]

I will be yes. Working on a couple other projects and they will all get released together.