N52 Stage 2: 3 Stage Manifold Installation and Tuning (The Most Important Mod for Your N52 BMW)

[@jabe9228]

My 2007 n52 has a plastic valve cover that has the integrated baffle, so no external oil separator on the manifold. Just wanted to clarify your comment about 2008’s. Nice bud dude. I’m doing mine in a few weeks. I already have the free tune just waiting on the DISAs now.

[@UltimateBimmerExperience]

After some more research, you're totally right. My mistake. I'll need to correct that somehow. Thank you for letting me know

[@UltimateBimmerExperience]

IMPORTANT UPDATE: It's been pointed out to me that I made a crucial mistake. The 2007 models also have a plastic valve cover with built-in PCV meaning that you do not need to worry about the oil separator underneath the manifold and just use the 'F' shaped return hose. In my video I mistakenly put 2008 as the year they changed the design. My apologies. Links: ECS Tuning 3 Stage Manifold Kit: bit.ly/3DF20pR Or Separate parts you need for installation: Small Disa: amzn.to/3jaR3mK Big Disa: amzn.to/30BpeOg Manifold Gaskets: amzn.to/30A8XJr PCV Kit for Pre 2007: amzn.to/3mVshZ6 PCV Hose for 2007 and after: amzn.to/3AVZYyQ Throttle Body Gasket: amzn.to/2YVNBWz Oil Filter Housing Gasket: amzn.to/3vs4V11 Oil Filter Housing Bolts: amzn.to/3j9M99P

[@brooklynmeets3961]

I was literally thinking it doesnt make sense cuz my manifold doesnt have it bjt the 3 stage one has it, so i can just hook up the crank case vent hose and the oil will find its way into the valve cover

[@ArticulateArena]

I got my engine cleaned and i feel like they melted my disa on 3 stage.... is that possible? idk how to check if it's working properly

[@ArticulateArena]

ngl this makes me frustrated just watching it.. do you actually enjoy doing this?

[@spacecadet3482]

Your charisma and perseverance will take you further than bmw, just completed your content m8 gang gang.

[@UltimateBimmerExperience]

All my videos? Wow, thanks! 🙏

[@h22bomb]

Love the attitude and humor, keep it up and this could be the beginnings of a big channel. Coming from VW world learning bmw and this was very helpful thanks!!!

[@UltimateBimmerExperience]

Thank you very much! I hope to get there one day, glad I could help!

[@irrelaphant1003]

Fantastic videos, I've got a 328i SULEV with the 3 stage. Been waiting on getting the cable and such to do the tune. Keep up the good work man

[@fasteat1]

Tune does not exist for the N51/SULEV model, not needed since it already has 3 stage from factory

[@fasteat1]

If you see RSA Delete DO NOT FLASH IT by itself, you will brick your DME

[@UltimateBimmerExperience]

Yeah to my understanding doing just the RSA delete on any platform will leave your car without anything

[@UltimateBimmerExperience]

It does have 3 stage but it's still not using it to full capacity, more so for fuel efficiency. I don't remember numbers exactly but I think n51 stock HP numbers are comparable to 325i stock tune numbers. (Slightly less than 230hp) 255hp 330i

[@UltimateBimmerExperience]

Just checked, Bimmerlabs supports n51

[@skylerking1679]

BE WARNED: Do not use an intake from a 2006 model year car if your car is newer, the 2006 intake only has one port for the CCV system, the intake shown in this video has 2, and as mentioned in the video; cars produced after 2007/8 the updated engine with a plastic valve cover will absolutely require a 2-port manifold, BMW does not make a replacement hose that only runs to 1 port for these later models with an internal CCV system

[@benjamin07420]

It’s fine, just need to plug one of the lines, not a big deal really

[@krispytoast8804]

To add on to this, the early ones made in late 05, early 06, are different also

[@sufio454]

So I can use a newer intake on my 2006?

[@charlesd7301]

Theres a 2006 330xi at my local junkyard. Would I be able to fit it to my 128i 2009 nicely?

[@skylerking1679]

@@charlesd7301 no, I don't believe it would work

[@aaronhalsey2508]

I did the Bimmerlabs Euro 330 tune and MAF delete. Best money I ever spent. : ) Good work on the videos.

[@UltimateBimmerExperience]

Glad to hear! How come MAFless? You'll get better performance using the maf

[@aaronhalsey2508]

@@UltimateBimmerExperience Just having fun testing it out.

[@breadismyoatmeal5807]

i know this is like a year late but you said you did the bimmerlabs tune, did you also do the 3 stage manifold?

[@darrellrogers5703]

Awesome content 🎉🎉🎉 I would also change out the ckp sensor which is right by the starter might as well my dad said don't fix it unless its broken but he doesn't know about German enginuity 😂Great video

[@peted2757]

I did the three stage manifold but the software for tuning is no longer available any advice on other diy tuning software

[@UltimateBimmerExperience]

22rpd is the best tune on the market right now in my opinion

[@extarthe]

Wow bro thank you for the tuning part helped a lot

[@valentijn9]

I am so glad the euro spec N52B30 in the e82 125i already has this as standard.

[@UltimateBimmerExperience]

saves a bit of hassle for sure

[@Vexedattheveil]

Guys if you have the SULEV N51 it came with the three stage manifold stock ;)

[@UltimateBimmerExperience]

Indeed, just not utilized to it's full power potential

[@syLLyTime]

First off, love your editing style and videos man, thanks for sharing your knowledge and experience. My only question is if the batch files would work for an N51 to utilize the 3 stage intake manifold properly? I know AA has an N51/N52 tune but I don't wanna drop those numbers just to turn my 3 stage intake on 😂

[@UltimateBimmerExperience]

Thanks! As of now Bimmerlabs doesn't have support for N51 anymore, I believe some other companies do offer support for n51. Sorry for the late response

[@FasterandFunnier]

Fantastic video, I appreciate all the details!

[@whappy212]

Loving the vids Over here in the netherlands.....tho the muffler delete costed me 375€ ( it was the cheapest too in my area ) 😅😅 The 3 stage intake here 2nd hand is also between 500 and 650€ euro😂😂😂

[@Dr-easy]

Bro love you vids! Im from Europe and have a n52b25 but i think i have that 3 stage manifold? Can this be true that euro has it stock? And how much Hp would I get from just a tune?

[@jimbilly5543]

Thanks bro good vid now I go cup pipes

[@armandomorales242]

I did a valve cover replacement cause my car was making a crazy ass sound dude like overly obnoxiously loud like a alien or my car had demons bro idk The old one had a huge crack in it and the new one actually made the noise go away I broke my pvc hose valve 😭😭😭😭😭 your right those things are so brittle

[@antonijestanisa8565]

Much love for the mercedes diss. Bavarian supremacy

[@natking1u1z99]

I have a 328i that I bought used for some reason I think the former owner installed a stage 3 manifold.

[@valentijn9]

Same goes for the oil filter housing cap and “bird cage”

[@nando338]

dude this is great i have a 06 325i, the only thing that seems intimidating is the flashing process (specifically the transmission part) and whether this will mess with any smog checks since im in cali

[@UltimateBimmerExperience]

It's a little scary, but if you do everything carefully and leave it on a battery charger you'll be good. And nothing to worry about with your emissions either 👍

[@GlyphicYT]

Perfect video thank you

[@UltimateBimmerExperience]

Glad you enjoyed it!

[@soundseeker63]

Can anyone vouch for the quality/durability of the aftermarket DISA valves? My car is getting on for 20 years old now and I think they could probably do with replacing since they are the originals that came with the car. Those ones look like good value, but if they fail after a year or two then maybe it works out cheaper in the long run to replace with OEM ones....? BTW the function of DISA valves is to effectively lengthen (when closed) or shorten (when open) the distance between the runners, which has the effect of increasing the range over which resonance charging occurs, thus improving the volumentric efficiency of the engine and enhancing the torque curve.

[@UltimateBimmerExperience]

I'm still using these same disas 3+ years later with no issues. And yeah I agree, I did a terrible job describing what they do lol

[@soundseeker63]

@@UltimateBimmerExperience They are still in good condition? A lot of the reviews say they fail early and the sealing gasket material falls apart quickly.

[@johnroperos9831]

How come mine has only have 1disa valve which is the big flap above the throttle body, the hole where the small disa valve goes is filled by something is (its covered) although the connector for the small disa is still there hanging

[@nxb_ali1]

Would you know what type of screws that are needed for the small disa and big disa?

[@michaeld9997]

Anybody still using this just a heads up when changing the EDIABAS configuration code or any code for that matter. The # sign at the beginning of any line makes that line inactive as if that line is not there so where it says #Interface = REMOTE, that line is not active and it’s not supposed to be active. If you remove that # sign it will become active and you’ll likely have two interfaces and may or may not get some sort of an error.

[@AdrianSinner97]

great great great video mate, big KUDOS

[@UltimateBimmerExperience]

Thank you !

[@duaneburris7ate9]

The PCV Heater that's gotta recall

[@shibasalute]

We're going to do a series of unplugging shit lol.

[@aramahmoudi2011]

Hey man great job, I want to do the same thing and have got the manifold and disa’s just not a computer guy and don’t want to mess with dme. Out of my curiosity checked the disa’s with the wires on the car they are working without tune do you think still need the tune?

[@UltimateBimmerExperience]

They'll work without the tune but not to it's full potential. Very noticeable difference after the tune.

[@aramahmoudi2011]

Thanks man, what do you think if I follow you step by step can I do it my self because they are charging arm and legs about 700$ by the way does your cruise control work with this tune?

[@UltimateBimmerExperience]

For sure, just be careful. It's not too hard, and yes everything functions normally

[@aramahmoudi2011]

Appreciated bro also for your time and respond. Going to subscribe it.👍

[@UltimateBimmerExperience]

You're welcome! Thanks for watching !

[@paolorepetto6233]

GREAT Great Job .. Only a question - I made same upgrade 3 stage intake manifold in my Z4 E85 2.5i 2006 (n52) without any software upgrade. do you think it's necessary ?

[@UltimateBimmerExperience]

Thank you! It's not needed, but to get the most out of it it is. It's a noticeable power gain with a tune.

[@paolorepetto6233]

@@UltimateBimmerExperience Do you know if is possible the donwgrade of software to return to original one ?

[@UltimateBimmerExperience]

Yup, it's fully reversible

[@paolorepetto6233]

@@UltimateBimmerExperience good.. but where i can find the file to return at the original one ? Can you help me ?

[@valentijn9]

Coolant hose flanse to the head is also plastic. I changed that for an aluminium one

[@UltimateBimmerExperience]

Me as well, so much better.

[@maxheadroom224]

They call that the "mickey mouse"

[@valentijn9]

@@maxheadroom224 correct

[@jonathanpaz1196]

Hi, I'm upgrading the intake manifold for a three stage on a n52, can you tell me which connector is for the big DISA? The longer or the shorter one, thanks 🙏🏽

[@ogkhud]

Your videos are fucking great man lmao

[@UltimateBimmerExperience]

♥️

[@louiecabadas812]

Great video. How did the aftermarket Disa valves hold up? Are these any good or oem is better?

[@UltimateBimmerExperience]

I've had no issues with them, I've had 2 sets of them on different cars and never had any problems. They might even be better than the oem ones because these have metal "hinges" whereas the oem ones are all plastic to my understanding

[@alecschmidt1735]

hey do you know anything about tuning n51? i really wanna tune it but i can’t compromise it’s place as my daily. bored of it being heavy and slow tho, would like a lil extra kick

[@UltimateBimmerExperience]

As of right now 22rpd is the only company I know of supporting N51. They're also the best on the market imo

[@YouberTuberNoober]

Hi maybe you can help im going nuts trying to figure this out. I have an 07 525 i magnesium vc. Got a intake feom 06 530 also took the ecu/dme. Installed everything had a locksmith come make a key and car runs. But has no balls at all. Launch c reader elite reads the ecu as my original 525 ecu but my original is waster damaged so qhats goin on? It ont detect that its has valvetronic

[@alexwalsh31]

Great video this is something I'm doing. I already have the stage 3 manifold and i have an N53 engine but its a 325 and i want a 330i conversion. Disa Valves are coming 11617 579 114 & 11617560 538. Got gaskets at the garage. My main question is will me car have the right wires or loom for the disa valves or will i need to buy them??? Cheers Big holla from England

[@UltimateBimmerExperience]

As far as I know all N51/n52 wiring harnesses have got the hookups for them. Not certain on n53 because they never sold here in the US, but take a look under your hood. They'll be clipped to the intake manifold on the front side if so

[@Chris-gj4do]

In theory replacing the valve cover with the magnesium valve cover and Stage 3 with Oil Separator will work

[@UltimateBimmerExperience]

Like replacing the plastic one with the magnesium one? I've seen it done with oil catch cans. Idk if the wiring harness with the updated design had the plugs for the oil separator.

[@Chris-gj4do]

@@UltimateBimmerExperience update: magnesium valve cover has been installed. Stage 3 installed. my main problem was 1 port to 2 but the hose from the valve cover to the oil separator is at a weird angle in my car. I dont think my oil separator had a power cable so its currently unplugged, we see how that goes in my -30 Celsius weather.

[@Grayxlx]

Where can I find a free tune now? It’s all been taken down?

[@GadgetMart]

How do I know which software version to flash to my 2008 BMW Z4 2.5i to unlock the 3 stage manifold?

[@likits1999]

California smog regulations just ridiculously tighter. Any tuning not being from factory in the vehicle, will make you fail the smog check. Will this upgrade keep me from passing smog? Great job by the way!!!

[@UltimateBimmerExperience]

I don't think it affects it, because they sold 330i's in California. Don't quote me, because I can't exactly guarantee, but I don't see how they would know that you've changed the tune regardless. You could even argue you're changed to another factory tune lol. I think you'll be okay tho !

[@The13lackMist]

just subscribed!

[@benjaminwingchun9665]

Stage 3 intake manifold vs the n54 manifold?

[@Pb0815]

for you US guys, is this simulair to "converting" an 523i to an 525i for EU guys? so from 177HP to 218HP?

[@itzmasonreushd7519]

I did this with the bimmerlabs labs tune and my car just cranks but wont start

[@vivekreddykompelly6394]

okay so does the 328I and the 325 i share the same engine?? I am from India I am considering to buy a used e90 330i( the same car as 328I) but those things are rare and I also have to do a manual swap on it because a everything is almost an automatic soo.. I see a lot of 325i s but they only make 210hp when compared to the 330i which makes 250 ish so please guide me

[@UltimateBimmerExperience]

Yes, that's correct they both use the single port manifold

[@paulolsen6870]

I believe the 330i has that manifold.

[@UltimateBimmerExperience]

Correct

[@AfUgGiNhYpEdNiKkO]

I picked up a three stage manifold from a 07 330i and will be installing on a 10 328i, should I remove that ccv/pcv ball looking thing off the manifold?

[@UltimateBimmerExperience]

Yup, and just buy the "F' shaped PCV return hose.

[@AfUgGiNhYpEdNiKkO]

Awesome, thanks!

[@UltimateBimmerExperience]

No problem! Good luck

[@AfUgGiNhYpEdNiKkO]

I just realized that I picked up a manifold that has one port for the pcv return hose… is there a way I can work around that?

[@UltimateBimmerExperience]

Can you email me a photo? [e-mail]

[@thegeneral1955]

Looking to do this with my car soon, I have turned a wrench a fair bit but never on an euro car this involved lol. Do you think I should also go ahead and replace the valve cover and gasket while doing the install? I have a 09 328ix. Thanks.

[@UltimateBimmerExperience]

It is not any easier or harder to do VCG with intake manifold removed, so the timing doesn't matter. Thanks for watching!

[@thegeneral1955]

@@UltimateBimmerExperience Good to know, I think I might have a very slow leak from my valve cover, no idea tho. Hardest part is trying to source a cheap 3 stage, eBay resellers want $300 and it’s annoying

[@RubyKinggg]

I have a 2007 328xi will I have to buy the stage 3 intake manifold or is on there standard already?

[@UltimateBimmerExperience]

328 would not have one from the factory

[@berkantciftci4307]

Would this also be doable on the N53B30 engine? I was planning on doing this for my 325i EU spec

[@loz789]

My 125i came with the N52B30a and has the three stage intake, I’m not sure on the 325i but it should be the same. Check the bimma forums out

[@DavidLopez-qe9wk]

thinking of doing this to my 128i, but im not seeing any flash tune for the transmission on bimmergeeks (auto, ga6l45r). I know the 3 series has a trans tune available, did you happen to flash your car with it?

[@UltimateBimmerExperience]

I believe I did when I had an automatic, most likely not entirely necessary

[@swagninja2737]

i have the n51 in a 2008 328i so i just need to tune it and i will get the maximum power out of my three stage manifold ?

[@juxebeats5439]

Guys it said programming not ik fatal error - security code needed

[@juxebeats5439]

downloaded correct sp-datens and manually flashed using winkfp problem fixed car runs great

[@hamidsheikh9823]

Very helpful video! I have an 2008 N53 325i E93.Bought an N53 B30A 3 stage inlet manifold with DISA valves & throttle body off a 330i. Is it a straight bolt on or do certain parts have to be interchanged? Thanks for your advice.

[@UltimateBimmerExperience]

I don't believe this works for N53. To my understanding N53 has the top block of an n54, which has a different mounting for the manifold. But I'm certain because they never offered that in the US market

[@UltimateBimmerExperience]

I'm seeing different things, n53 may have came with it from factory. Really not sure lol

[@jonahbeddes]

The Bimmergeeks cable is listed as "Out of Stock." Is there a different cable that you would recommend?

[@UltimateBimmerExperience]

honestly not sure what to recommend. the bimmergeeks cable is the only one I have used personally. I'm sorry :(

[@Mdot401]

I got a interesting question.‼️ So I have a n51 328 with the 3stage. If I flash it to a 330i could I then after use a 330i tune after the flash ?

[@UltimateBimmerExperience]

I'm not exactly sure what you're asking, but a tune will take full advantage of the 3 stage manifold. There are only a few companies supporting n51 at this time, none of which are free. The Bimmerlabs flash does not work with N51.

[@PRNCofthePOND]

How much was the manifold swap, i went to a euro shop they told me $800??? Am i tripping or are they

[@l626v8]

Couldn’t you just add a n54 intake manifold on it? I’m asking cause I have a n52 but someone told me I could put a n54 after told them about me putting a stage 3 manifold on it

[@UltimateBimmerExperience]

Yup, it's a thing too it's just not a direct bolt up. It takes a little more work to modify it to work and the benefits depend on your goals and setup. I will probably be doing a video about it at some point.

[@ProdMZA201]

I have a 330i '06 with the 3 stage intake manifold already installed. Would flashing the tune unlock its full potential??

[@UltimateBimmerExperience]

Nope, you're already where you need to be!

[@Grayxlx]

Anyone have issues using generic obd scanners after the tune? I can still use ista and coding but generic obd no longer work

[@nando338]

bro…i cant find the other two medium sized bolts for the small disa boy…its the small ones that are generic and then a long one and then…two medium ones no?

[@UltimateBimmerExperience]

If I remember correctly it's 2 long and 2 medium ones on the inner one

[@nando338]

do you remember where you bought them from? (｀・ω・´)

[@UltimateBimmerExperience]

I got mine from the junkyard that I got my 3 stage from, everything still attached. I can try and find part numbers though

[@duaneburris7ate9]

Is that cable connecter at 17:35 and 32:30

[@xgus1717]

My 328i came with an n51 with the 3 stage intake. What can i do with it?

[@UltimateBimmerExperience]

To better utilize the 3 stage on N51 you need an aftermarket tune. 22rpd is a great new option, and in fact the only aftermarket tuner that supports n51 as far as I know. Not sponsored lol

[@derekluna5516]

Hi I have a project wich is a bmw 328xi 2007 the problem is the it caught fire and the plastic got melt so im replacing the entire Harnees wires everything looks to fit with ecu and sensors do you think once i finished everything as its supposed is going to turn on as before or do ima need a tunes or som like that to get it running? Is my first expierence with this and i would appreciate your help thanks!

[@derekluna5516]

Also when the car was in fire it was actually running fine without any advertisments on the dash but never turned on again after that time the fire cause was probably oil leaking into the exhaust manifold Basically the fire melt only the cables plastics and secondarys things so im wondering if im going to need to repgram the car once i finished doing the wire to make it run?

[@UltimateBimmerExperience]

Nope, assuming nothing else is damaged you won't have to do anything after replacing the wiring harness

[@derekluna5516]

@@UltimateBimmerExperience thank you so much it feels so good to hear thiss

[@derekluna5516]

@@UltimateBimmerExperience Also after replacing a harness just in case what can make the car not turning on even tho everything is wired properly?

[@deadeye4256]

i assume the car will drive before the tune?

[@UltimateBimmerExperience]

Yes, this will work totally fine without tuning just won't have any benefits

[@deadeye4256]

@@UltimateBimmerExperience thanks buddy, would you mind talking outside of yt?

[@UltimateBimmerExperience]

Sure, you can message me anytime

[@Ethor498]

I called up my local junk yard and they said they have a intake manifold from a 2003 330i. I have a 2000 328i, would that work?

[@UltimateBimmerExperience]

No, this mod pertains to the n52 engines only

[@skatenbikee707]

Trying to do this on a 2008 528i lci manual im assuming im going to need a different tune

[@UltimateBimmerExperience]

Nope, probably not. All depends on your ECU, which yours will probably be MSV80, which would work. Make an account on the website and type in your vin and you'll know for sure

[@skatenbikee707]

@@UltimateBimmerExperience yes its msv80 i made one and there are 2 stock tunes but it does not say what they are for just a bunch of numbers

[@UltimateBimmerExperience]

Dm me a picture on Instagram or Facebook @patgehrig or pat Gehrig on FB and I'll try and help you figure out which is which

[@adriang7080]

@@UltimateBimmerExperience hello, I have a 2008 lci 528i and I was trying to figure out which disa valves would fit the 3 stage manifold I have, would you be able to let me know which ones fit?

[@randalleldridge5667]

Does anybody know if bimmerlabs is still being ran by someone?

[@sadlyboy6439]

Why you didn’t use a n54 manifold?

[@UltimateBimmerExperience]

doing a separate video on that this year

[@hypethevipe5724]

Will This make your 328i have more reliability problems in the future

[@UltimateBimmerExperience]

No, not significantly so. It's an OEM upgrade, the disa flaps fail eventually but I wouldn't say your car would be any worse off with it installed

[@sazzadahmed3319]

My e84 25i has n52 with 3 stage from factory, how do i utilize it. Is there anyway i can put 28i stock tune on my 25i

[@UltimateBimmerExperience]

You're gonna want the *30i tune. Bimmerlabs is the free option I show in the end of the vid.

[@sazzadahmed3319]

@@UltimateBimmerExperience thanks for the reply and for your helpful vids for us n52 owners. About my e84 there is only 28i and 35i, my 25i spec is 218hp and 28i spec is 258. If i can get near that i will be happy

[@UltimateBimmerExperience]

Well the chassis and was offered from factory won't matter as long as your ECU is supported by the available tuning options. Bimmerlabs for example, supports MSV70 and MSV80 ECUs. If one of those is utilized in your car, the bimmerlabs tune will work for free. And no problem, thank you !

[@LSWFTW]

Wait so if I have a 08 328i do I still get the Oil separator PCV system or do I just place the 3 stage on as if it’s not there?

[@UltimateBimmerExperience]

On 08 you would bypass the external separator and use an f shaped hose

[@angelomontiseloileite6659]

Can i upgrade this stg3 intake in my bmw 325i 2.5 e90?

[@UltimateBimmerExperience]

Yup👍🏻

[@e9x_d]

What if you have n51 with 3 stage stock?

[@UltimateBimmerExperience]

Then you'd just need to find a tuner that supports n51 to get the most out of the manifold. Currently 22rpd is the only tuner I'm aware of that supports n51

[@cletocortez8108]

Does anyone know if this upgrade is smog legal in California???????

[@UltimateBimmerExperience]

Won't affect your emissions equipment, if anything you'll probably get better gas mileage.

[@cletocortez8108]

@@UltimateBimmerExperience thanks for the reply, the one mid I still want to do.

[@713jtmechanic8]

Will this work n52 09 x5

[@UltimateBimmerExperience]

Yes

[@jackleo8795]

I’m sick can’t get this done

[@UltimateBimmerExperience]

You've got it dude 😎

[@seanwaldo9229]

Would this process be exactly the same in my 2010 128i with the n52?

[@UltimateBimmerExperience]

Yessir 💯

[@waldrymarte5226]

Is the gas mileage worst after installing 3 stage manifold?

[@UltimateBimmerExperience]

No, aside from having a lead foot. It might even positively affect gas mileage

[@IccDani]

Hey man do you plan on dynoing your car anytime soon? im curious to how much hp youve actually gained

[@UltimateBimmerExperience]

Yup, almost all of the mods are installed with this build, if I can find I dyno I definitely will for a video.

[@IccDani]

@@UltimateBimmerExperience nice🤝

[@Grayxlx]

Anyone have issues with using obd after the tune?

[@bobor2676]

can i do it with my e60 523i 2006 too? or is it only for 525i?

[@jonahpalset5680]

I believe this only works with the 525 and up, the 523 has a 2.5 liter engine with different ports unfortunately

[@UltimateBimmerExperience]

If you have the plugs for the Disa valves I imagine it will work. But I'm not certain because we don't have x23i BMWs in my market.

[@christopherrodriguez9076]

would i be able to do this on my 06 325i?

[@UltimateBimmerExperience]

Yup, the car in this video is an '06 325i actually lol

[@The_Only_Juan]

Revving at the car wash... 😂

[@TheShmoodled]

How do i make my 325i 2006 fast boy car

[@UltimateBimmerExperience]

By selling and buying a 335i (obviously)

[@ghxst5756]

Does this tune work for the N51?

[@UltimateBimmerExperience]

Not currently. They did at one point I believe

[@jfaze401]

I have a 06 330i does mine come with the 3 stage intake

[@UltimateBimmerExperience]

Yes it does

[@jfaze401]

@@UltimateBimmerExperience perfect will i have to tune it or no

[@skylerking1679]

@@jfaze401 You don't need to follow any of the content in this video, your car already has it all.

[@UltimateBimmerExperience]

@@skylerking1679 ^^^

[@RaySane]

I have an 06 330xi I wanted know if I already have stage 3 as well?

[@shaggy69001]

00:09 hilarious

[@EliHitsBills]

Brother will this work for a bmw 323i e90

[@UltimateBimmerExperience]

I think so, I'm not entirely sure because they didn't sell those in the United States I dont think. So I'm not sure tbh

[@EliHitsBills]

@@UltimateBimmerExperience ah Okk see appreciate it do you know if I could set the settings back to default if it doesn’t work?

[@EliHitsBills]

@@UltimateBimmerExperience cuz I’m pretty confident it would work it’s an n52 325 that’s just detuned produces 177hp

[@EliHitsBills]

@@UltimateBimmerExperience thanks man just one last thing for the tune did you do this 100% by your self or got someone to help

[@UltimateBimmerExperience]

Myself, and a lot of forum research last year.

[@keemoify]

Hello , i have a problem with my e60, the climate controll only blows air through the vents in the middle of the car, on the middle of the dashboard, and in the back of center consoll towards the backseats) not on the sides on the dash or in front of the dash. Do you know what can be the problem?

[@aarondube4030]

Would you be interested in doing this conversion for me on my 04 z4. M54 engine I believe and what would be a ballpark price on such service including price of parts. Aaron

[@UltimateBimmerExperience]

This is only compatible with n51 and n52

[@aarondube4030]

Ok thanks

[@hightimes5309]

is there a flash for my model, it's a 2011 f10 523i 2.4 litre N52.?

[@RALEIGHthe3RD]

Thanks for the video! Some great hands on information. WARNING, don't take everything said here as fact. There were several flawed concepts and explanations that I noticed just skipping around the video. The horsepower claims are absolutely ridiculous, and the idea of directing air to individual cylinders is BS. There is more misinformation here, but I'm not looking to harp on the creator, just be careful. Good practical information, however fundamentally wrong.

[@UltimateBimmerExperience]

Nice backhanded compliment. Also note on my stage list, "hypothetical gains". I don't have access to a dyno and most people already know about the benefits of this. I'm referring to crank anyways. I don't recall saying cylinders individually getting shut on and off, rather on the lines of "more air to cylinders that need it most". Thanks for skimming

[@DylanSimmons-c3k]

Honestly bro your videos are way too noisy like the background noise should be put on one an your voice should be put on like a nine because it's so goddamn noisy it's more irritating than informational there's so much ruckus bro like what the hell

[@davidd7909]

Dude you're a butcher Bro. lack of finesse!

[@Bluntinator69]

I have an 09 328xi and I'm planning on making more power, what would you recommend starting with?

[@Darksaige]

From what I've seen as I have 2011 get a cold air intake

[@christophervanliew30]

do i have to have a full catless exhaust system to do this stage 3 and the tune?

[@samimed6512]

What would u do for an n51 brother