NAMI SCOOTER NFC upgrade

Nami Nfc upgrade. it requires the following parts as a kit to do the upgrade
1) new cable top side to have an extra plug for the NFC
2) new dashboard, different hardware, and different software
3) NFC and the cards come with it
4) The new light and horn switch that light turns on.
IPhone works as well, you could set the NFC into the learning mode, and copy the iPhone into it
the two cards that come with the NFC are the mother card. the
NFC could accept a total 5 extra cards or phones to be copied and used to lock and unlock
• NAMI Electric NFC iPho... link shows how to connect the iPhone with the NFC
you could send an email to [e-mail] for more info
Once you upgrade the new dashboard, please re-do the setting
The default voltage is 60v, and tire size is 10 inch, if you are using it on burn e, you need to change to 72v and 11 inch

[@mspring6387]

To make this much easier, when you pull the cables out and up the stem, tape a pullstring (or string) before you pull them up and out. Then using that same pullstring, tape on the new connectors at the top hole and then pull them back down the stem. You will not need the hook. Also, it is a good idea to use a Sharpie (silver) and mark the julet connectors on both sides before you pull them apart so you know exactly which connector male goes with which female.

[@McKuc]

I think that they do not have the same amount of pins, so it is easy to connect back together. I like to use a 1,5mm² copper wire instead of a feed spring because the "head" is thinner. A wire is oftentimes not stiff enough.

[@prankman9116]

hello what about android phones is there any app for it???

[@aimetti]

Can get backlights better? Beacose whu follow me car or any transport not see me from back beacose bad lights..

[@JulianRides]

And did you fix all the braking sensor problems on all klima scooters or on burn e-2's?

[@peterchan9525]

Your English is too good for Chinese sales !!!

[@ThEGeo539]

Hello, or buy the NFC controller?

[@edilsonlopez40]

Very Nice 👌

[@emilio13]

Did the Neweset Version of Nami Burn E3 max had the upgrade ???

[@maciejgrodziski9987]

Hi,since when is NAMI KLIMA on sale with changed rear lighting? Best regards.

[@alexling763]

Hi I have the e2 max but now one key is not working! What can I do ? Thanks

[@JuanManuelSuarezTriana]

What app , I need for put the Smart key on my phone I have Xiaomi too ?

[@skanderbenabdelkrim6332]

Hello Michael, where to buy eventually? Regards.

[@Raankar]

Nice

[@Sndiversity]

Where to order this ?

[@lucaspoole8866]

Why can't my phone be used for a NFC card I have tried everything i have the Galaxy S23 Ultra?? Please help me

[@G20vtr]

Me too, and nothing happens, i dont find any program to use it

[@jonathannewman6144]

@Michael Sha, unlike with other android phones, there does not seem to be any way to copy an NFC tag into a Pixel phone so that the phone can be used to emulate the tag?

[@cryptosp33d]

u can use any credit card or anything that has nfc technology

[@G20vtr]

Like what program?