Nano waterfall 304 stainless Steel sink install.

A short(ish) video on how I fitted together a nano waterfall sink, as the instructions which come with it, if any, are useless.

[@blerinlyka3588]

best description so far thank you.

[@mgyoung777]

Great Video! Much better instructions than anything provided by these all in one sink companies. Would it be possible to give a little more detail on the drainage install, even a picture of what it looks like fully connected. I have never used this flexible drain hose and could use some direction. Thank you.

[@mickyas1000]

Thank you. 😊😊 the drainage is a strange one, as it's much larger than anything we use in the UK, so the only way I could think of fitting it was to connect all the fittings together (they'll only go together one way so just take a few minutes to familiarise yourself with them), then use a 40mm compression fitting on the end of it, this is then connected to standard 40mm waste pipe, but make sure the outlet is below the grey flexi waste trap. Hope that helps.

[@munirak5524]

Hi! Great video and thanks for taking time to explain each feature. Can you explain a possible reason why the main faucet can have full pressure but the waterfall outlet has water flow just a tiny bit and stop. Im trying hard to search for videos and solutions online but can't seem to find a solution. Will explain to my plumber once you reply.

[@mickyas1000]

Hi, thanks for that, in all honesty I've no idea why you would have differing pressures for the faucet and waterfall, I had similar with the faucet and the glass washer, which lost all pressure, so all I can assume is there's poor quality fittings used on the internal diverters, can't say for certain without fully dismantling. Could have something to do with your mains water pressure or you could have your flow slightly reduced at the stop cock. Sorry I couldn't be more definitive, but should give you a bit of info. Thanks for watching.

[@munirak5524]

@@mickyas1000 thanks!! My plumber was able to fix the water pipes that connected to the faucets a day ago, including the waterfall line.. so the issue is resolved.

[@mickyas1000]

​@@munirak5524did he say what the problem was, might help others if they come across the same issue?

[@marcelastokoe7792]

Very good video

[@mickyas1000]

Thank you.😊

[@nikamelia8715]

Hi, I was building a model like this (one without the second sink and with bottle of soap) and my sink did not come with the water distributor, one for cup washer. Did you buy those or should I get those myself.

[@mickyas1000]

Hi, sorry for late response, just back from holidays. There are numerous variations of this sink, some come with soap dispenser, some with water filter and some with cup washer, it all depends on what you ordered as it will come with all relevant fittings, if you want to change one for another you might need to alter/purchase additional fittings.

[@AliAhmadi-hq9pj]

❤❤❤

[@DaniDani-xz8us]

I already have a round faucet, but my faucet is broken. My faucet when turned is loose. do you know how to fix it?. please answer I'm frustrated with my faucet

[@mickyas1000]

Hi, I've heard from other buyers that their faucet has broken internally, as it apparently comes with very cheap plastic inserts in the body. If the top vertical part is loose try using an alan key to tighten the small grub screw on the back of the faucet, if the whole faucet is loose, you'll need to tighten the back nut, if that doesn't work, then it would appear your faucet is damaged.

[@DaniDani-xz8us]

@@mickyas1000 Thank you for replying to my comment. My faucet fell out of place. Do you have Instagram or other social media? so I can send you a picture of my faucet. If you dont mind

[@DaniDani-xz8us]

@@mickyas1000 when using my faucet, I turned it very hard and then my faucet came out of place

[@mickyas1000]

​@@DaniDani-xz8uswithout seeing what you mean, it sounds like you've snapped the internals.

[@EmrysHyperion]

how do you connect the water filter?

[@mickyas1000]

The water filter is quite simple, if you buy filters like these... amzn.eu/d/cj07T2K this is a kit which includes a reducer (1/2"bsp to 6mm) needed to go from a John Guest 15mm male coupler (after the emergency shut off i mention in the video) so going from the 15mm water supply - attach the reducer, then you connect the 6mm pipe to it which you then connect to the bottom of the filter (insert the holding clips to prevent it coming out), then take a length of 6mm pipe from the top of the filter to the base of the tap (shown in the video), BUT just before you make the final connection to the tap, put the end of the 6mm pipe into a bucket and turn on the water supply and leave it to run till you fill the bucket, this flushes some of the loose excess carbon particulates from the filter. Hope that helps. 😊

[@mesc161]

@@mickyas1000 IM LOST!! so i need to buy those filter connect it under and at the other end put the water ?

[@mickyas1000]

​@@mesc161yes, the sink has a dedicated filtered water tap (2.07 in the video). Once you have the filter cartridge, you connect the cold mains water in the bottom (using 6mm pipe) and then take the 6mm pipe our the top into the dedicated tap.

[@DaniDani-xz8us]

I already have a round faucet, but my faucet is broken. My faucet when turned is loose. do you know how to fix it?. please answer I'm frustrated with my faucet.