Making super boats at home | Building scrap engine yachts

We invite you to watch the next part of the super yacht project using scrap car engines!
Contact: [e-mail]
Welcome to NASAT Channel!
I guarantee you will not be disappointed with the videos uploaded because there are some of the best videos that no one has done yet.
Thank you and hope you will enjoy and not be disappointed with the time you spend watching my videos.
Support the channel by subscribing to see more great videos!
If you find it interesting, Like, Subscribe and comment on your questions and ideas, the channel will support and create great videos for you.

[@Nasatchannel]

Bạn đang xem phần 1 của dự án siêu du thuyền sử dụng động cơ ô tô phế liệu. PART 2: kzbin.info/www/bejne/m2Gyd6B7iN6tprc PART 3: kzbin.info/www/bejne/l6jYopaMnJinpdU PART 4: kzbin.info/www/bejne/sHnRqmBjaLxsf80 Mời các bạn đón xem phần tiếp theo của dự án siêu du thuyền sử dụng động cơ ô tô phế liệu nhé! We invite you to watch the next part of the super yacht project using scrap car engines! Chế phi thuyền điện từ xốp sử dụng Motor 6000W | Build a boat from electric 8hp foam kzbin.info/www/bejne/gJ2tpmmQa65nY9k

[@YanisLacourt]

00009900990000999090900000000000000090900000000000900000000009009009900909099990999900000000000000900000009000009900000000000000000000000000000090090009009090999090909000990900999999090999000009000000090900000000900000000000000000000000000000000900000000000000009000009990099000000900999909990909909090009900000000000⁰😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅 26:39 😊

[@samvalentine3206]

Good work - awesome results! Nice to make that Subaru engine purr like a kitten again! Can't wait to see it become your super yacht... Will you mate the engine with a transmission to give you reverse for the propeller? Great job! làm tốt lắm! - Làm tốt lắm - kết quả tuyệt vời! Rất vui được làm cho động cơ Subaru đó kêu gừ gừ như một chú mèo con lần nữa! Nóng lòng muốn thấy nó trở thành siêu du thuyền của bạn... Bạn sẽ kết hợp động cơ với hộp số để đảo chiều cho cánh quạt chứ? Bạn đã làm rất tốt!

[@Nasatchannel]

I will combine the Subaru with the transmission so the boat can move forward and backward. I will show you it in the next part, hope you follow and support me. Thank you so much!

[@JAMALD-HUMORISENG]

Waaawww kerrreeennn videonya nih bang 👏👏👍👍👌👌.Semoga Channel ini sukses Slalu.Aaamiiinnn 👌👌🙏🙏

[@Nasatchannel]

❤️❤️❤️

[@HungNguyen-nu2cj]

Tuyệt vời, rất mong chờ tập tiếp theo

[@user-ty6by3ku6w]

Надо было головку блока не наждачкой тереть, а об асфальт. Так плоскость точнее будет.

[@user-xn5oi3bf1b]

И на вкладыши олово наплавить😂

[@alekssimon3521]

Мойка движка очень понравилась! Особенно когда вкладыши высыпал в тазик настроение сразу поднял😅

[@Nasatchannel]

❤️❤️

[@user-mw1qn2cy9c]

Это сарказм. Видео о том как не надо ремонтировать двигатель, тем более субару🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣 @@Nasatchannel

[@tonysargent1699]

Astonishing! You are totally amazing! The boat hull is very impressive and that engine is incredible! I can only thank you for sharing your skill and your passion with us and say that I look forward to your next installment!

[@Nasatchannel]

Thank you very much, I will try to do better in the next part. Hope you always support me!

[@AJRestoration]

Us - How much did you torque the head bolts? Him - yes Great stuff, I use the same torque specs on most of my restorations.

[@Nasatchannel]

Thank you very much, I will try to do better!

[@BuildItTuneItEV]

Came here for this.

[@Nasatchannel]

@@BuildItTuneItEV Thank you!

[@mary74724]

(cựu dân cư CÂN GIỜ cảm ơn các bạn...rất tài ba )🧡🧡🧡👍👍👍👏👏👏

[@hoale-mx3ov]

Có nhiều kênh làm chủ đề tương tự. Nhưng sản phẩm của anh bạn này luôn gây bất ngờ và khác biệt.

[@scottwyckoff5483]

A naturally skilled human being, great job!

[@Nasatchannel]

Thank you so much! ❤️❤️

[@kolgan042]

Под замену как я увидел только поршня и вкладыши шатунные. Когда он “притирал” седла клапанов, я за него порадовался до слез.

[@Nasatchannel]

Спасибо большое, я сделаю лучше.

[@phongdiy]

Kênh vẫn rất tuyệt vời

[@Nasatchannel]

Cảm ơn anh rất nhiều nha!

[@dieuhuynh1901]

Máy lạ quá

[@Nasatchannel]

Loại động cơ Boxer của Subaru đó bạn

[@Mephistopholies]

If all the videos on this channel are the same dude; WOW! Got to be the coolest guy in SE Asia... The track Play dead by Neffex is fire!

[@anthanhnamfishing6294]

hóng clip hoàn thành

[@Nasatchannel]

Cảm ơn anh rất nhiều, em sẽ cố gắng làm nhanh nhất có thể.

[@LinhNguyen-hd5nm]

Lần đầu thấy động cơ xăng như vậy..❤❤

[@Nasatchannel]

Đó là dòng động cơ Boxer á bạn, mong bạn ủng hộ mình nha!

[@LinhNguyen-hd5nm]

@@Nasatchannel rất thích những ý tưởng của bạn chúc bạn nhiều sk

[@Nasatchannel]

@@LinhNguyen-hd5nm Cảm ơn bạn rất nhiều nha!

[@hainguyen8610]

động cơ boxer nổ phê thiệt

[@Nasatchannel]

Cảm ơn bạn nhiều nha!

[@888WulfDog888]

I love how the torque settings seem to be measured by "elbow clicks" 😂 not sure I would risk using an engine that's not been factory spec torqued up in a boat myself but go for gold!

[@raymondmelly6576]

fair play to you a great job

[@Nasatchannel]

Thank you so much!

[@ferrykaldewaaij5494]

Impressive skills, great video!

[@Nasatchannel]

Thank you so much!

[@Sangtaonasat]

🇻🇳❤️

[@mrMacGoover]

Got to love those Subaru engines, there only flaw is irregular cylinder wear that results in oil blow by.

[@Nasatchannel]

Thank you very much, I hope you will always support me.

[@krmtvmobilesoundslights4467]

Is that a Subaru Engine horizontal??❤❤

[@Nasatchannel]

That's right, that's the Subaru boxer ej18 engine

[@allaneduvije285]

good job

[@Nasatchannel]

Thank you so much!

[@nguyenhuong854]

Quá tuyệt vời !

[@Nasatchannel]

Cảm ơn bạn nhiều nha!

[@simonallan9941]

Isn't it worth putting in new piston rings and conrod bearings, since they are so cheap compared with the labour, and its apart anyways, its not going to run any different that you will notice by just cleaning and painting the engine, and especially for marine purposes it should definitely have new bearings and rings, but awesome videos I wish I could watch it all day, and I would love to do that myself if I had the opportunity, thanks kindly for sharing your great experiments and skills.

[@ViktarPisarchyk]

What engine is that? looked like a Subaru until you put a carburetor on it

[@Nasatchannel]

It's a Subaru engine, but it's had its fuel filler changed to make operation simpler. Thank you for your interest!

[@guillermobrandt291]

Spectacular work and assembly, congratulations! Waiting for the second part 😃😃 Greetings from Argentina

[@Nasatchannel]

Thank you very much, I will try to do the next part as soon as possible, I hope you always support!

[@user-vc6zz3iz5l]

Keo đấy đất ko bác

[@Nasatchannel]

Keo và sợi composite giá hiện tại khoản 50k 1kg tùy nơi bán nha bạn

[@paulshamblin6260]

I love it. Subaru or Toyota? Love to see someone with minimal tools and maximum skill do something with nothing. Great job!

[@Nasatchannel]

Thank you very much, it is a Subaru ej18 engine, I hope you will always support me.

[@JohnRoss-ps4vh]

Congratulations on your build its nice to see your determination and God given talents being put to good use cant wait to see the finished product

[@Nasatchannel]

Thank you so much!

[@rodneyhoadley3167]

I think we missed part 2 through 9

[@ralikdiver]

Amazing video as always. Super impressed with such a thorough engine tear down, cleaning and rebuild. Can’t say I’ve seen better.

[@Nasatchannel]

Thank you very much, I will try to do better, I hope you always support!

[@thienduong2543]

Hay quá ❤

[@Nasatchannel]

Cảm ơn bạn nhiều nha!

[@TrungHieu-nv7sz]

Sao phần 2 lâu vậy a zai

[@Nasatchannel]

Chiếc này lớn nên rất nhiều công đoạn, mong bạn thông cảm nha. Mình cũng đang cố gắng làm nhanh nhất có thể

[@TrungHieu-nv7sz]

@@Nasatchannel chúc a sk và gắng thành công chiếc thuyền nha a

[@Nasatchannel]

@@TrungHieu-nv7sz Cảm ơn bạn nha, mong bạn luôn ủng hộ mình!

[@TrungHieu-nv7sz]

@@Nasatchannel làm tới đâu r a zai

[@edmo43]

Công việc tuyệt vời là thiết kế chiếc thuyền và công việc cơ khí hoành tráng là khôi phục và sửa chữa động cơ. 👍👍

[@Nasatchannel]

Thank you very much, I will try to do the next part as soon as possible, I hope you always support!

[@ragedaspric1373]

Nice idol galing naman po

[@Nasatchannel]

Thank you so much!

[@Jonathan.D]

Can't wait to see the second part to this one. You did a great job on that engine rebuild! I do worry that it will not have enough power for a boat that large. Have you seen a fishing boat from Japan? They have a great style. I think you could copy it to make a really awesome boat! Keep up the good work!

[@Nasatchannel]

Thank you very much, I will try to get the next part out as soon as possible. This engine is quite small compared to the boat so the boat will not reach high speeds

[@kevinpeters1780]

​@@Nasatchannel If it is the 1800cc subaru boxer google say 260 hp ?

[@Nasatchannel]

@@kevinpeters1780 This Subaru ej18 engine produced in 1989 has a capacity of about 110 horsepower.

[@vitalyizvv1632]

Друг приветствую тебя. Ты строишь по проэкту или выдумывает сам?

[@user-us2jv9cm2x]

Очень понравилось видео, настоящий мастер! 👏

[@user-ty6by3ku6w]

Собирать мотор Subaru без динамометрического ключа бред. Блок очень пластичный, если перетянуть мотор будет клинить при нагреве.

[@Nasatchannel]

Спасибо за отзыв, буду учиться на вашем опыте и становиться лучше.

[@johnpartridge7623]

I never thought that Super Glue & 1 Ply would be Included to make a Boat-but I was wrong, good job mate 👍👍👍

[@AdaywithJoe]

Excellent, one thing, when you're feeding water to engine with a water hose , the feed direction is from bottom up, not through the thermostat housing. It exits the thermostat housing. Great channel 👏

[@Nasatchannel]

Thank you very much, I will try harder and hope you will always support me.

[@williamscoggin1509]

It is a real joy to watch you work.😊

[@Nasatchannel]

Thank you very much, I hope you always support!

[@upsidediy3945]

Seems like he built this boat for a music video. Good job....15:51...The engine looks super clean.

[@user-cn9iy4xi4v]

Беллисимо

[@diegorodrigues9059]

Nossos irmao asiatico tem um dom incrivel mano!!!! Bcs conseguem reparar qualquer coisa ne 🙌👏👏👏👏👏👏👏👏✋

[@noelbaguioocampo9168]

Part 2 please

[@Nasatchannel]

I hope you will always support and follow me. I will release the next part as soon as possible, thank you.

[@utemnguyen9783]

a nên bịch khẩu trang 2 cai va đeo kính cho an toàn anh ạ ,vì mạt của lưới và keo khá độc .chúc anh thành công và nhiều sức khỏe

[@Nasatchannel]

Cảm ơn bạn rất nhiều nha, mình sẽ kĩ hơn. Mong bạn luôn ủng hộ mình nha

[@josevirginioesilva4378]

muito legal

[@Nasatchannel]

❤

[@samuelrasnake227]

can someone please tell my what on earth is the super instant adhesive this guy is using...the product name...and where can i get about twenty liters

[@Nasatchannel]

It is a polyester and fiberglass glue that is widely used in construction beams and boats. You can buy it at construction stores.

[@upikabuh2679]

Amazing...saya terkesan dgn cara anda merestorasi mesin ini..Luar biasa. Apakah itu Bekas mesin mobil VW ??

[@Nasatchannel]

Thank you so much! Subaru ej18 engine ❤️

[@MAMOGAG]

凄いなぁ～　EJ18 エンジンをDIY で組み上げるなんて素晴らしい！　しかもデスビで回してるし！

[@noelbaguioocampo9168]

How much your total cost In this boat.?

[@abcdefghijkmnkp]

👍👍👍👍👍👍👍عااااالییی

[@Nasatchannel]

❤️

[@ryanjohnson1814]

What engine is that ? Make model ? Definitely you are building bigger boats now. Cool

[@Nasatchannel]

It's a Subaru boxer Ej18 engine, thank you for your interest!.

[@Ogsonofgroo]

Build on the engine, sounds beautiful, is this going to be a long-tail? Quite enjoyed this video, but please you guys gotta stop washing parts with bare hands though, trust an old idiot who's hands are not so good. We store popcorn in anticipation of seeing the final build, nice light lay-up on the hull + a screaming little motor and that craft should scoot right along, I thought the hull build was pretty brilliant and could be applied to many different designs, very nice imho. Cheers from PNW Canada!

[@Nasatchannel]

Thank you very much, I will try to do the best I can, hope you always support me.

[@khuongnguyen2594]

Bạn oi mình muốn mua lại 1 sản phẩm của ban

[@Nasatchannel]

Sản phẩm mình chưa thử nghiệm qua độ bền và an toàn nên mình không thể bán nha bạn, mong bạn thông cảm

[@MrArdeqboy]

Amazing work and assembly, congratulations! Waiting for the second part 😃😃 Greetings from Malaysia

[@Nasatchannel]

Thank you so much!

[@tomovylog640]

Bác cho mình hỏi 1m² cho 1 lốp composite thì tốn bao nhiu keo ạ. Mong đc truyền thụ kinh nghiệm ạ.

[@Nasatchannel]

Còn tuỳ thuộc vào bạn dán loại sợi nào nữa nha, nếu loại sợi mỏng max300 dán bề mặt phẳng thì khoảng nữa kg keo ạ.

[@tomovylog640]

@@Nasatchannel cám ơn bác nhé. Còn loại dệt thì khoản 1 ký trên 1m² k bác.

[@tomovylog640]

@@Nasatchannel giống loại bác làm á.

[@Nasatchannel]

@@tomovylog640 loại dệt Roving 360 thì cũng khoảng nữa kg thôi bạn. Còn loại trong vd roving600 phải dán ướt keo hơn 1kg mới ngấm hết sợi được nha bạn

[@tomovylog640]

@@Nasatchannel cám ơn bác rất nhìu ạ.

[@deosiewilson732]

Very interesting video ... i enjoy watching your work, you boys have excellent skills

[@Nasatchannel]

Thank you so much! ❤️

[@khanhluu6668]

Đẳng cấp luôn!

[@carlosrodrigues1467]

Para colar assim essa cola deve ser milagrosa

[@Nasatchannel]

A cola de poliresina e fibra de vidro é uma combinação perfeita, é amplamente utilizada em barcos e construção.

[@kevinpeters1780]

@Nasatchannel I have a VW 2000cc boxer engine in my garage and i would like to put it in a boat like yours! I will try making one! But where is the exhaust manifold? I didn't see iton the videos featuring the engine. Unfortunately it is rated at about 80 hp. I would like to turbocharge it.! Thanks for the videos!

[@Nasatchannel]

Thank you very much, I will do it in the next part, hope you follow and support.

[@iainball2023]

Nice job, but a pro tip. Swap your battery impact for a torque wrench. 😂

[@Nasatchannel]

Thank you so much!

[@jonnyskray3000]

Nice job!

[@Nasatchannel]

Thank you so much!

[@ferryferry1015]

Blasting👍

[@Nasatchannel]

Thank you! ❤️

[@user-vr3mc1tr9r]

На*ера нам стапель? Какой такой мидель-шпангоут? Центровка? Не утонул и ладно. Чуть косо держится на воде и ведет в сторону- "и так сойдёт! А винт какой - тяжелый или легкий? - Да бросте дорогие зрители. Трудолюбивый народ. И за свой труд заслуживает- " Лайк".

[@eldeld7272]

Суперклей - величайшее изобретение человека.. не удивлюсь если этот малаец планирует слетаиь на луну..

[@Nasatchannel]

Большое спасибо, я вьетнамец и надеюсь на вашу поддержку.

[@terrywarner8657]

Great camera work and production coordination at 16:10 to add the parts during the pan right.

[@Nasatchannel]

Thank you so much!

[@masyantokates1427]

Waw...Tanpa kunci torsi, pasti feeling nya ahli 😊

[@Nasatchannel]

❤️❤️

[@lagopeter]

Brilliant layout of the entire engine 👏 👌 👍 🙌

[@Nasatchannel]

Thank you so much!❤️

[@MRdus22]

nice❤

[@Nasatchannel]

Thank you so much!

[@jeanlawson9133]

Awesome 👍 you have skills to pay the bills..... Impressive 😎

[@Nasatchannel]

Thank you so much! ❤️

[@UdinNelayan]

Sangat ribet dekali yang merskit mesin nya,bikin kita ribet untuk merskit ulang😅😅😅..sukses selalu kamu benar2 ahli

[@Nasatchannel]

❤️❤️

[@bobbysierraVlogs]

A jigsaw, grinder and glue = super boat.

[@Nasatchannel]

Thank you so much! ❤️

[@Omphitbodoh69]

Wooow...good and best worker brother. Godbless you and getting better.❤❤❤

[@Nasatchannel]

Thank you very much, I hope you will always support me.

[@user-we6se3kp4i]

quá đã

[@Nasatchannel]

Cảm ơn bạn nhiều nha!

[@user-ng9ii9ez5r]

Where all the torque spec or torque wrench......

[@0dbm]

Always been a dream of man Beautiful work , thank you

[@Nasatchannel]

Thank you so much!

[@brian7940]

Can't wait to see what type of exhaust manifold you will run.

[@Nasatchannel]

Thank you very much, I hope you will always support me.

[@user-zd3zi6lk2x]

This dude has wicked skills ! It definitely isn't his first rodeo !

[@centralKuLiBaNguNaN]

Cuman usul aza ..klo potong tripleknya pakai kater aza bang lebih praktis...heee 😂😂😂

[@Nasatchannel]

Terima kasih, saya akan belajar

[@Tatal.b]

Aguardadndo próximo video, esse está ok

[@Nasatchannel]

❤️❤️

[@imridingwithstoopidohwaiti3948]

Cool project but I cant believe you reused the rings and bearings after doing all that work..

[@ericrobles8755]

Hola amigo saludos desde puerto rico me gustaría saber cómo se llama la pega q estás usando para pegar la madera gracias

[@Nasatchannel]

¿Te refieres al pegamento de poliéter y fibra de vidrio? Es muy común en embarcaciones y construcción.

[@miketaylor6282]

I seen so many things being done wrong, that I’ll have nightmares the rest of my life.

[@Fleischmann773]

"Free"

[@user-yc3em8qx2p]

Excelente profissional 👍

[@Nasatchannel]

❤️❤️

[@joinis_story7260]

Ok bos👍🔔⭐⭐⭐♥️

[@Nasatchannel]

Thank you! ❤️❤️

[@user-cs7up3ur4x]

Охренеть какая колоссальная работа сделана и все одним человеком

[@Nasatchannel]

Спасибо вам большое, надеюсь, вы всегда меня поддержите.

[@_Farce]

cục động cơ đó là động cơ của xe gì vậy bro ? tôi muốn mua 1 cục !

[@Nasatchannel]

Động cơ subaru ej18 boxer nha bạn

[@takingoutthetrash1512]

using silicone and no actual gasket is not good

[@Nasatchannel]

Thank you!

[@amerika83]

Оппозитный звук 👍 Россия 🇷🇺

[@markward6076]

The chemical cleaner you use does a good job. What type of solvents do you clean your engine parts with?

[@luisbatista597]

💪💯😎

[@Nasatchannel]

Thank you so much!

Quá đẳng cấp rồi 😊

[@ricardogoiano7886]

O motor ele desmontou lavou as peças e montou de novo com as peças velhas , pra que isso ?

[@Nasatchannel]

Substituí muitos componentes, a máquina está com vazamento na válvula quebrada, as juntas do motor, os anéis do pistão e a bomba de óleo estão vazando. Então eu consertei.

[@terrywhite3952]

You sure make it look child's Play, great work!!!