For decals...check www.mikesdecals.com CK merchandise.... clay-kemp-scale-modeling.creator-spring.com
@TomWhite-o6e21 күн бұрын
Dutch from assembly required sent me. New subscriber.👍🏻😀👍🏻
@brooklynplasticworks61773 жыл бұрын
Just came across your channel... you do really great work. Can't wait to see more.
@ClayKemp3 жыл бұрын
Thanks and welcome!
@hawiiplayz35293 жыл бұрын
Wow, I’ve been building the Gen 6 chassis wrong all this time 🤦🏻♂️... looking forward to part 2 👍🏼
@ricks69z283 жыл бұрын
Dam I could watch you all day too, can't wait for next video. Rick 🤓✌️
@shawnevans582 жыл бұрын
I love it when the fuel cell is seperate, you can actually paint it red without any masking
@geoffpowe55583 жыл бұрын
Once again, just watching and learning 🇦🇺👍🏻
@shawnevans582 жыл бұрын
It was so much i had to do to this chassis it was crazy to make it look accurate. Cut the shock shafts off and drill them out so the shock shafts would go down in the cylinder, cut down the springs, front suspension had to be cut down, the body had have the lower front spoiler added on with sheet styrene. By sitting it lower you have to cut the top lip off of the carb to allow the hood to sit correct on the body. Cant see the carb top anyway. But it was a all around nice kit
@Jem7sk3 жыл бұрын
Great videos Clay. What sanding sticks do you use?
@ClayKemp3 жыл бұрын
I usually get them at my Hobby Town. They are right by the checkout register, so I always grab a few.
@UncannyEXP3 жыл бұрын
Man, I wish this and the Chase Elliott kit were widely available. Scouring them for a good price is like looking for a needle in a haystack, so I’ve settled with the older ones. Hope they can get a deal with Revell or somebody to make kits for the next-gen cars. Good build!
@ClayKemp3 жыл бұрын
I think you'll see some Gen6 kits back on shelves soon in one form or another. ;)
@louiethepotato2 жыл бұрын
Yeah man. Salvino's JR bought the rights to NASCAR models now. They go for a premium though, about $50/kit.
@bobbyosborne23753 ай бұрын
Scooby dooby doo Where are you? We got some work to do now! Clay, we need another build.
@michaelhintzmikesminiature18123 жыл бұрын
Looks like your off to a Great start!!! I'll be watching
@MarkBatsonHobbydude0073 жыл бұрын
Love it! Look forward to your videos!
@MileHighScaleModeler2 жыл бұрын
Clay, have you ever done scaled confetti on a body after a win? I am curious if you have and if so/or not, what you would use to get scaled confetti and how you would glue it to the body.
@ClayKemp2 жыл бұрын
That I have not tried. I know Henrik from Germany did that on one of his Nascar builds, but I can't remember how he achieved it. Sorry.
@ScaleModelKitReview3 жыл бұрын
I just subbed, you have a very nice channel, I'll be watching your builds. Cheers
@ClayKemp3 жыл бұрын
Thanks!
@megatron84903 жыл бұрын
Where did you find these modern nascar models?
@michaelcooke25593 жыл бұрын
Nice work.
@ronstewart97923 жыл бұрын
Looking great so far. Ron
@Matthew_Dubroq Жыл бұрын
Man, this is the ABSOLUTE PERFECT vid for me right now, I'm literally starting this project myself. Question though, is this the same kit as the Danica Patrick Ford Fusion but with different decals?
@ClayKemp Жыл бұрын
The Harvick Jimmy Johns kit and the Danica kit were the same. Either one will work.
@melindakemp47133 жыл бұрын
Wow that’s a lot of trees!! How do you know where to start?
@ClayKemp3 жыл бұрын
Most start with the instructions....I just jump in. :)
@THROTTLEPOWER3 жыл бұрын
Looking good Clay!!! 👍👍👍
@davidparker22593 жыл бұрын
It’s great to see you on here, Clay. I miss your articles in SAE, and now that it’s merged, well, what’s the point? I was really pumped when you mentioned your old friend Dave, but then I realized that you and I don’t know each other, so I couldn’t be the Dave you meant. Looking forward to your next vid!
@ClayKemp3 жыл бұрын
lol.....Dave Thibodeau....his channel is DT Model Art on youtube.
@scaleperspective3 жыл бұрын
Where does one find this "light chassis gray" lacquer? Is this shade applicable to all NASCAR chassis?
@ClayKemp3 жыл бұрын
What I do is mix the gray myself. I bought a quart of white lacquer and a quart of black lacquer and mixed my own light gray up as needed and keep the extra in a bottle. That way I always have some ready and I add to it as needed. Gives me flexibility in how light or dark of a gray I need as well.
@Boblina3 жыл бұрын
I assume you 2k clear your bodies as well? Curious which speciific omni clear you use and how you spray (Needle size, PSI, % reducer if any). I have some Matrix MS-30 speed clear that I can get to be decently glossy but still with some orange peel. Still have some things to try with it but I''m assuming things carry over from spraying other 2k clears.
@ClayKemp3 жыл бұрын
I've tried lots of two part clears. But I've had the best luck with Omni. I believe it is a lower lever PPG clear. It is mixed 4:1. Although some times I will thin it just a little bit with Omni reducer as it gets older and thickens up. My friend Jay has great luck with Splash Paints 2 part clear. It comes as a set, you just mix it up and spray.
@homewrecker443 жыл бұрын
What paint are you using for the Chassis Grey?
@ClayKemp3 жыл бұрын
I mix my own with white basecoat lacquer and a little bit of black.
@andreasfrank2978 Жыл бұрын
Why did you cover the opening on the roof. It is the "emergency exit" to pull out the drivers. I know it is very hard to see on images but there is an opening in that position.
@raymondblasee10482 жыл бұрын
Clay, I watched this old video right now and I already seen the final assembly yesterday. This video is excellent as well seeing how you started off on this model, long story short, this is a good subject matter but does any model companies out there make Joey LOGANOS Mustang he's racing right now?? I would really like a model of it!!
@ClayKemp2 жыл бұрын
I think they only Mustang body that is available is in resin. Check with mikesdecals.com He may have some. Otherwise you'd have to covert a diecast. Thanks for watching!
@shaunswesey51793 жыл бұрын
Yes my Buildin Bro! So. 2 questions Clay #1 when you were weging the Roll cage why were you using the panel scraper ??? And #2 do they not use Escape hatches any more? Build. On bro!
@ClayKemp3 жыл бұрын
I don't think I used a scraper...that was probably my tweezers you saw maybe? I forgot to mention it in the video....the kit body is somewhat of a Super Speedway body, thus the roof hatch. I didn't want to make a SS model, so I filled it in.
@kgcustomscalemodles47623 жыл бұрын
Nice video are you going to do a folded down widow net on this build ?
@ClayKemp3 жыл бұрын
Yes...I plan to. Thanks for watching...
@jamesbutler59953 жыл бұрын
Great job bud really envy your talent!!
@bigchef21123 жыл бұрын
Nice build. Interesting choice for filler. How was that poly putty to use? I’m an old builder so I love the 50’s through 80’s, but like the newer stuff because it goes together so well. Will be following, thank you.
@ClayKemp3 жыл бұрын
I like it so far. I am used to using Evercoat 2 part putty. But my cans would always get air in them and dry out and I'd waste most of it. This tube seems to keep it fresher.
@jslute3 жыл бұрын
Airbrush? Primer? I'm on the hunt for a new one.
@ClayKemp3 жыл бұрын
I've been using Tamiya gray and white primer lately. Straight from the can. Current airbrush is a $40 Master brand of some sort I got off ebay. Seems to work pretty good.
@joshwoodham32033 жыл бұрын
What kind of glue/cement is that and where did u get it?
@ClayKemp3 жыл бұрын
Plastruct liquid glue. I get it at HobbyTown, or off of ebay.
@garyparker29693 жыл бұрын
Very Interesting Sir, thanks for Sharing n God Bless All.
@diskod503 жыл бұрын
i could watch ya build all day...lol....any drag racing projects coming up? bahahaha...murder mittens!!
@ClayKemp3 жыл бұрын
Thanks Daryl....yes. I've got an older Funny Car project in mind once I get through a few other things!
@futten32302 жыл бұрын
the nascar master
@CarDreamsinStyrene3 жыл бұрын
Great job....
@kingranch19623 жыл бұрын
Awesome
@Antluvstrains3 жыл бұрын
It’s a clever idea to do this.
@PowerlineRacing222 жыл бұрын
I’ve always wanted to do this but it’s too hard to understand
@artjock473 жыл бұрын
Love this....thank you...!!
@NitroModelsAndComics3 жыл бұрын
Sorry to see Scooby make an appearance bro. I have a Pikachu on my right index from my Fujimi Enthusiast Countach . Damn thing bit me good.
@ClayKemp3 жыл бұрын
Ill tempered feline got me.
@NitroModelsAndComics3 жыл бұрын
@@ClayKemp Two legs or four?
@ClayKemp3 жыл бұрын
@@NitroModelsAndComics a mean four legged one. We call him the "fastest left in the west"
@NitroModelsAndComics3 жыл бұрын
@@ClayKemp I'll bet. Most of em are very fast indeed. Mine is like lightening.
@mikehynes66323 жыл бұрын
I see a bandaid, guess that destroys my notion that you were a robot 😁
@ClayKemp3 жыл бұрын
Mean cat....there was plenty of blood for proof!
@jasonbecker49743 жыл бұрын
Wouldn't it be cool to build models all day?
@GrizzlyCountry Жыл бұрын
No dialogue... 🤔
@TheDiamondback733 жыл бұрын
But, my question is.... Why Joey Logano??? Sorry, but I just dislike the weasel!
@ClayKemp3 жыл бұрын
lol Joey is usually good entertainment! Really I picked this version because I thought the colors would show up well in the video. And it had a lot of decals to apply. It should make for a cool model.