How to make a Simple Outdoor Lighting Design

[@KKrisku]

Your videos are so helpful and your accent is so cute and you speak so good English. Keep up the great work. Thank you.

[@andrewlaksh7931]

Thank you very much for this video , Archi Nelca. Very impressive.

[@Esraamostafa7]

Thanks for your educational videos you are very helpful I hope to be one of your team work it's my dream

[@ralphllanes6759]

can you also a bracket (about 1m) on the lamp post that you made and attach the luminaire then? also with the double bracket

[@banksidewithaaron]

Hi, I need some help. I usually only work on office buildings with indoor calculations using dialux evo. I have a outdoor car park design I am working on. I am adding bollard lights around the car park outside the building. How do I calculate the lux levels in a big open space like a car park? Do i have to draw a calculation surface across the whole external car park?? Or draw calculation on each section?

[@NelcaRoco]

better do it in sections. and properly label it.

[@learntobecomeagreatenginee2938]

What standard code do you recognize in lux level determination?

[@chathuragunathilake4290]

Dear Nelca, thank you very much for these educational vedios, much appreciated. Could I please know why a calculation object is used here in comparion to an assesment zone (under construction tabe) used in another car parking tutorial? Also when a calculatin object is used, how can you specify the MF (maintenance factor) for the luminaries. Thanks again - Chad

[@أسامةحسنالبلخي]

thank you very much for your explain , it is clear

[@ppokmon74]

Hi Nelca, I should give this tutorial a shot. I'm looking for a tutorial that will allow me to construct a sloping site in Dialus. It is for a car park. And I must also figure out how to construct the ramps and other facade features.

[@NelcaRoco]

please send the drawing to [e-mail]. I want to see what the sloping looks like and how the parking has been layout.

[@peterbekhet9259]

How to use uplight in outdoor area, and sees its effect in calculations ?

[@NelcaRoco]

place the uplight close to the wall.

[@geraldestradamogollon8073]

Hi Nelca,I know that you use revit with ifc translators, you have worked some project with archicad ifc, there is some problem with the recognition of zones, Greetings

[@bordzbio]

we are required to use Dialux 4.13. i hope they are just the same?

[@Haiphan0201]

Hello Nelca, How to set standard for calculation object difference?

[@waleeddhary9852]

Am sure that god send you to me in this moment am so worry because of my new project outside lighting exactly exactly like your project in style thanks dear

[@NelcaRoco]

ur welcome, Waleed! enjoy learning!

[@muhlissuprapto4579]

Hi Nelca... How to make ULD file? I have IES file and want to make ULD file... Thanks

[@NelcaRoco]

hi, there is one youtube video on how you can do it. But I think you need to download the app to convert it. Check that one but be careful in installing app in your PC.

[@Aswathy1982]

Hi Nelca, The video is very informative. Do we consider driveway and Parking as 2 differennt calculation surface. Also can we show the street in the outdoor lighting calculation in candela. Thank you

[@matteopaluffi3269]

It's possible simulate the outdoor sunlight ?

[@NelcaRoco]

not for this software.

[@xavimaestas7116]

Im having a problem with light going through my building. is there a way to fix this?

[@rockyvaldez1988]

Lodi :)

[@rawanamin485]

Dear why the landscape course has been removed from Udemy platform, I did not have the chance to complete the course, ANY CHANCE TO RETAKE IT?

[@NelcaRoco]

Yes. It will be back soon. I just got penalized for not uploading the complete videos.

[@NelcaRoco]

I will update you.

[@rawanamin485]

Thank you

[@momenramadan3314]

nice 👏👏

[@denzrandomcorner8784]

Hi mam Nelca. How to exclude the room or inside building premises in the calculation, because i need only to calculate the outdoor spaces but the inside building automatically calculates wherein i did not put lights.

[@danielapittalis882]

have you tried to take off the surfaces? It should'nt calculate the area that dont have useful surfaces.

[@RGStudiosMedia]

if you make a calculation thru calculation surface tab, you could make a cut out (means cutting off the area that you don't need a calculation) or if you do from assessment area, I think you could exclude also the areas that you do not need some calculation. But overall, Dialux will render some lights throughout you whole area just to show some light spills form outside or from inside

[@ericg.magnaye6899]

Hi Miss nelca. Hope your doing ok. Thanks for the video.

[@أسامةحسنالبلخي]

if it is there covers sheet for the Parking most be change for a places lighting poles

[@rejamatin101]

Hi Ms. Nelca.. I wonder how to change material on that assesment area. Should we create an extrusion or insert rectangular object with specific high first? Or is there any other method? Thank you Best Regards,

[@RGStudiosMedia]

Hi, there are several methods to have different textures on the ground. You could create different floor element or extrusion objects, as long as the extrusion points do not collide.

[@edetaclearning8022]

Thanks

[@CS-hb3ir]

Do i hear a rooster in the background? 0:36 ?

[@tiktokbalkan1980]

Hello Nelca Roco , would you send me this project of yours, otherwise I am a student and I would need it for school,thanks in advance