Nepa Agri-Commerce /JD 6930 +ROC RT1000 JD 82000+KRONE BIGPACK 1290XC HDP/ -Paglia 2017-

Рет қаралды 578,097

Күн бұрын

Buongiorno a tutti!!! Team Nepa impegnato nella ranghinatura e pressatura paglia con con accoppiata john deere e roc/krone. Mezzi impiegati: JD 6930 equipaggiato con un andanatore Roc RT 1000 e un JD 8200 equipaggiato con una pressa quadra Krone BigPack 1290XC HDP.
Album fotografico qui: www.facebook.c...
FACEBOOK FANPAGE: / roland26

Пікірлер: 45

@danielstolarek8785 4 жыл бұрын

Ale macie dziury na polu. Masakra. Sprzęt strasznie skacze. John Deere bardzo fajne mocne

@piperdoug428 4 жыл бұрын

Hard dry ground like that he should have dropped the tire pressure on the 8200

@ChallengerMT875B 6 жыл бұрын

Great Video. Greetings from Germany

@danish994 4 жыл бұрын

Imagine have the moneys to a so expensive rake and don't have the moneys for a shield to the PTO shaft 1:57

@agri_67 6 жыл бұрын

Nice video !

@Landinaro80 7 жыл бұрын

Ma non si può bloccare il secondo asse della Krone??? non aiuterebbe ad evitare che scivoli'??

@codyludwig2811 5 жыл бұрын

I never seen a merger working in straw before, But if it works why not

@charlietanner6211 6 жыл бұрын

i dont think a n8 ford or to30 fergie would handle that baler

@conjoe176 5 жыл бұрын

That JD was doing well to hold it back on the hills

@UDV87 4 жыл бұрын

Твою девизию, что мужик на тракторе таскает пресс подборщик BIG PAC,так медлино ,можно быстрей ехать епт

@pjfarming4576 6 жыл бұрын

Why is the pickup of the baler set so high ? :-/

@ivgotballsofsteel4048 5 жыл бұрын

because the baler man was too lazy to put the wheels properly

@piperdoug428 4 жыл бұрын

@@ivgotballsofsteel4048 look how rough the fuckin field is bud.

@MIKELE_2572 7 жыл бұрын

Bellissimo video e belle macchine!! Grande Abruzzo💪💪

@lucabattaglin8346 6 жыл бұрын

Ma quanto pesa la pressa ? Bel video e macchine cmq

@livingatvillage500 5 жыл бұрын

Amazing videos

@DijGerful 7 жыл бұрын

Never seen a baler sliding away XD Maybe its because the ground is flat here in the Netherlands

@RoughRiderBB 6 жыл бұрын

CrazyDogfighter or because the operator forgot to lock the trailing axle...

@adrianoschina3095 7 жыл бұрын

Un po' troppo grossa la pressa per il 7200 così lo crepate!!!!😂🤣🤣Soprattutto in salita....

@alessandros0141 7 жыл бұрын

il john deere con l'imballatrice è un 8200 io abito vicino a nepa e ora gli ha attaccato un bivomere

@conjoe176 5 жыл бұрын

Here's to just getting it done🍻 fair play lads

@powerplay4280 6 жыл бұрын

Top Video 👍👍👍

@lucianotaraschi8762 4 жыл бұрын

Nn e pressa per collina.. O a limite trattore più grandicello 😉

@davidrowley8251 5 жыл бұрын

Several problems baling the sidehills. 1. The pickup cannot move independently higher or lower on the left side versus the right side. So when the baler leans downhill, the uphill side of the pickup, is lifted away from the ground. 2. The castering rear axle was NOT locked in straight ahead, so it was allowing the baler to drift downhill/sideways. 3. The windrows were so wide that the tractor tires were running on top of the thick slippery windrow edges and not getting good traction. The windrows should have been made narrower where the hills were steep.

@AdamSmith-uv6kr 5 жыл бұрын

David Rowley Several problems with your comment. This ain’t America where we have land that has some hills as in our farm in GA. This is overseas and if you’ve ever been there you would understand they have no other option. They do the best they can. Too big of a baker on that siding. Sure but in the valley areas which is probably the bulk of his fields it’s just right. Windrows r a bit wide but at the same time if they get to high and “roll” then that’s not helping either. Remember the merger is running that same ugly slope. Again thgh if uve never been in that area then it’s hard to judge. If I had not seen it before id criticize too.

@farmcentralohio 5 жыл бұрын

you must be a non farmer pointing out problems you think exist but in reality all 3 of your points are wrong lol 1. the pickup is not lifted away from the ground on the uphill side unless the thing is in the process of tipping over 2.the castering rear axle should NOT be locked, it's there for this exact situation 3.the edges of the windrows are not "slippery" lol 4.you have no clue what you're talking about :)

@JoshuaSmith-xw6jp 5 жыл бұрын

@@farmcentralohio why do you say the edges of the windrow aren't slippery? If the tires are on the windrow at all of course it's gonna be a lot more slippery than on the bare ground itself.

@farmcentralohio 5 жыл бұрын

@@JoshuaSmith-xw6jp Slippery? really? I've been baling a long time, on hills that will nearly pitch you out of the tractor seat, and I have never found any part of a windrow to be slippery.