NERF Rapidstrike CS-18 Repair | Random Unscripted Video

I fix an old toy. I wish I'd done it sooner 'cause now I have no one to play with ;-;

[@sir8923]

This video included a tragic backstory behind the nerf gun... Nice.

[@preraksoni6801]

I love ur videos bro✌️

[@somebodysome7240]

At the end of the video, the green piece, the little wire that's on it, completely broke off and is connected to the other board and not on the green piece. Would soldering it together work or it broken.

[@NNNILabs]

Soldering it together would work just fine.

[@lekhraj2482]

In my gun the white part which pushes the bullet forward is stuck. What should I do please help Bro.

[@NNNILabs]

Check the wires soldered to the motor, they were broken in mine - and the inductors were broken too - you can get rid of the whole PCB assembly and wire directly to the motors.

[@FahrezaAR-tt1jx]

Mine is revving but at really low rpm until i shoot it but it only goes 20 feet

[@sahillll3]

Bro when I pressed the button it doesn't charge up and I also putted new batteries but nothing happened and the new batteries were durecell

[@nishantsvyas]

Plunger getting stuck when trigger is released after firing

[@kljbanimations1170]

Hello, my rapidstrike has a malfunction where when I power it and pull the trigger, the trigger keeps shooting when I’m not pressing it, can you help me?

[@NNNILabs]

I guess you'll have to take it apart and see if some wire has come loose or something.

[@kljbanimations1170]

@@NNNILabs thank you

[@nishantsvyas]

I am facing trigger issue, it's getting stuck I assume. Any idea how to solve

[@NNNILabs]

Surprisingly this can happen if the batteries are not powerful enough, nothing except Duracell worked well for me. Alternatively, you can take the thing apart to see if there are any wires loose.

[@leewalcott3240]

Thanks bro my motor connectors needed the same thing how does that even happen its a sealed unit 😎

[@NNNILabs]

You're welcome! No idea why though...

[@kung2651]

Mine was just left out side is it just ruined?

[@NNNILabs]

You'll have to open it up to find out. The parts are all plastic except for the wires and motors and PCBs, so at least most of the internal structure should be intact.

[@kung2651]

@@NNNILabs idk you know the humming sound it makes well mines not doing that and the bullet just moves 1 inch

[@NNNILabs]

@@kung2651 You might have to take it apart and see what's wrong then.

[@ishaanchandel6966]

Bro my revving button is pressing but motors not revving what to do

[@NNNILabs]

try replacing the batteries or check for a broken connection

[@ajayuppu5003]

I have 6 of these....none of them working....help plsss

[@NNNILabs]

Really depends on the kind of NERF guns you have. I can't really help if they are not electrically powered, since electrical engineering is my expertise and not mechanical. If it is indeed electrically powered, then you can look up the name and look for circuit diagrams, as far as I know there are hardcore NERF fans who have reverse engineered and modified a lot of the NERF lineup.

[@ROBOTICGAMINGYT]

@@NNNILabs I didn't use my Rapidstrike for like 3.5 years and now I ordered duracell C batteries to use it and now it's not even revving .... basically it's not working at all given that Magazine is installed and the jam door is closed ....any way of fixing this?

[@NNNILabs]

@@ROBOTICGAMINGYT You'll just have to take the thing apart and see if something is broken, from what I noticed some of the wires have a tendency of coming loose over time, could also be corroded switch contacts.

[@ROBOTICGAMINGYT]

@@NNNILabs what's the cure of a corroded switch ? 🥲🤔

[@NNNILabs]

@@ROBOTICGAMINGYT You could try using an electrical contact cleaner (DeoxIT) or replacing the switch.

[@idabigchief47]

Mine will rev but won't shoot