Nescafe Dolce Gusto Disassembly

Diasassembly of a Nescafe Dolce Gusto
Like if you want more videos!
Comment to let me know what other videos you want to see.
Subscribe and turn on notification so you never miss a video!
Thank you for watching.
Nice coffee machines:
amzn.to/3PE9Bgf
amzn.to/3NAO3OZ

[@punkueto]

Gracias!! No contaba con las grapas de abajo

[@rgreaves89]

There's a chunk missing! It's doesn't come apart that easy

[@eg8568]

After unclipping the base, separate the two plastic panels on the back of the machine (the bits you removed the two screws from). Pull them away from each other. That will open up machine and you'll have access to the internals. From there it's relatively straight forward

[@eg8568]

@Tarquin it's been a couple of months now but I followed the video exactly, that was the only step I was missing. Perhaps you've missed a clip somewhere? Or do you mean they don't come apart at all? You should see an obviousl seam running down the centre, unless you have a different model.

[@queenmmillennia7821]

I have the same problem. Thanks. I'll try what you wrote.

[@gregowens2761]

Yeah video magically skips past the hard part 🤦🏻‍♂️ Removal of the base is mostly not necessary. The black panels need to be loosened at the top near the hot/cold lever (2 clips per panel, one either side of the lever) then it's held held in place at the bottom of black pan - a hidden clip at the front near drip tray (1cm up from the bottom) and another at the same point on the back (the panel makes a 90 degree angle with the chassis - push into the gap on the 15mm high vertical part of the black panel). Once loosened, the panels SLIDE UPWARDS not pull apart. Hope this helps someone. This video isn't great but sadly it's the only one for this model AFAICS.

[@queenmmillennia7821]

After unlocking the bottom part, how do you remove the cover of the upper part?

[@chrisgr1970]

I need this pump!!

[@mikke7073]

Cruel 😂😂😂

[@pakubeata991]

You're welcome. I still waiting to rebuild it ... 🤣🤣🤣

[@SuperDisassembler]

Thank you very much for the comment.

[@marcb8874]

merci , bon démonteur mais c est il remonté ?

[@bernadettekay4305]

Good day. Where can I purchase the water tank please.

[@kisstundike2339]

I had one but couldn't use it because of the noise level my children wake up in the early morning :(

[@DeamRules]

U forgot to disassemble the pump… I mean to take completely apart

[@SuperDisassembler]

Thanks for the comment.

[@anitadreyer9359]

All I want to do is change the washer because water is leaking at the bottom of the tank. Whole unit very hard to open compared to other styles. But I love my little ‘penguin’ ! So will give it a try. …

[@esterpadilla9386]

Mejor m compro una nueva. Me puso nerviosa tanto trasto q desmontar

[@riccardoottaviucci8521]

Disassembly? Destruction!

[@SuperDisassembler]

Because of the noise, 🤣

[@kevcall]

That was painful to watch.. I'm guessing you're never taken one apart before lol

[@SuperDisassembler]

🤣 thanks for the comment.

[@stephanefarine]

Avec les bon outils, je pense que l'on doit pouvoir faire mieux que ça. Ca ressemble à du tri sélectif en vue de l'élimination. finalement on ne sait rien de la panne!

[@mvs1980]

Eu consegui consertar a minha, suas dicas ajudaram! Thanks! kzbin.info/www/bejne/a6O1pICmnpl6r5I