Mikrotik VLAN : Create and Configure ( VLAN, IP, DHCP, NAT )

[@leester9487]

Thank you. You saved me a lot of time reading!

[@TheDorminys]

Great, simple tutorial. Thank you!

[@jadran_babura]

ty a lot, fantastic tutorial!

[@MrPatroclox]

The best channel on Networking resources. You create an awesome job!

[@Rouly88]

You didn’t show how to configure the switch to send Vlan

[@enzozisa2342]

for this is necessary a layer 3 switch?

[@kalamsenja9255]

What this make switch/hub? Or switch managable?

[@supriyochatterjee4095]

Awesome information Sir, it will be great if you can upload videos related to Windows Server Migration Process, Windows Server Troubleshooting and Patching and various other real world troubleshooting scenarios for Windows Server and Active Directory and VMWARE and Azure

[@lucasthielke]

Finaly find the only thing missing to work (What do on NAT). Thanks!

worked great, thanks

[@deniss.1926]

Hey. How do You do "conect computers to different vlans" ?

[@danield.3312]

this step is missing, probably setting the vlan tag on client pc's to 30, 40?

[@CuriousNatures]

dont work (. no interface receives an IP

[@exef1]

Do you take the routerip in one of the vlans? Or should he have his own outside the vlans?

[@brave.circassian77]

big thanx!

[@vinothnetworking2005]

Hi I have one end has static up and another end has local brand band but both end I have mikrotik can able to connect each other and share the local data

[@amin-ko2yr]

does other vlan can ping each other?

[@dongdaide]

Thank you

[@ticomtinelli]

Is it possible to configure the same static IP for two different MACs? the notebook wifi and rj45 card.

[@muradmondol4247]

Thanks.may I help you.how to management vlan IP set

[@jomarestrada8527]

thanks bro

[@turalaliyev8978]

Thank You

[@robertgichana4121]

Thanks

[@Ja-tk1xo]

I'm sorry, but in my RouterBOARD 952Ui-5ac2nD this unfortunately does not work with the TL-SG105E switch. The router in red informs that it will not do DHCP on the slave interface.

[@tariq4846]

Try DHCP either on bridge or vlan not to physical or virtual ports. Do routing in the end.

[@harirajendran1000]

is it possible to connect 2 different vlans to one printer without router ?

[@tariq4846]

Probably through inter-clan routing.

[@anouarbnmax8499]

Possible way to connect two d link 2750u devices together without a cable

[@piaskhan415]

Yes posible

[@anouarbnmax8499]

@@piaskhan415 Is it possible to connect them together without a cable?

[@piaskhan415]

@@anouarbnmax8499 yes. You need to use secondary router as a repiter. As soon as you see KZbin video. Or same SSID and password in two router then In Shaa Allah it will work

[@SovMan]

Thanks

[@ปลากระป๋องเปิดฝาแซ่บๆ]

Thank You, Switch I should assign VLAN 30 40?.

[@NETVN82]

Yes

[@tariq4846]

Didn’t you miss ip routing?

[@rajmohanlenin3842]

How to find out connected network vlan id?

[@NETVN82]

you show ip address and the corresponding configuration on the mikrotik router

[@rajmohanlenin3842]

@@NETVN82 thanks for your contribution and time..understood. Thanks.

[@zamilmastaliyev6967]

it shoudl be called vlan routing :)

[@TalhaAlii]

what software you used for virtualization and network designing ?

[@JMRTECHSOLUTIONS]

How to convert old desktop into microtek router

[@NETVN82]

you need a license

[@JMRTECHSOLUTIONS]

@@NETVN82 Thank you, if Available please create a video install mikrotik os in desktop and also config settings

[@wyc2462]

What if I only have one Router without Trunk Port. Which means there is no switch there. Only Hex. I don't have a trunk port. Directly connect to the router?

[@xcrisso]

did you figure it out i also only have an Router with internal switch and wifi ;) RB 4011

[@Techdalai]

There is no such thing as wlan1 when I go to the interface. How do you do that?

[@wahyuhardiansyah1585]

what emulator are you using?

[@sorinsuri6026]

Hello I am interested in configuring a voice vlan and a data vlan for a voip phone can you help me?

[@sygys]

this does not work with pc's connected directly to a vlan port. Computers dont know what to do with the vlan tag in a packet. these vlan id's need to be untagged from the packet before they leave for the pc. also the pc doesnt add a vlan id to a packet so when it sends a packet to the router the router will block it. I guess this works in a virtual environment but it sure doesnt in real world examples.

[@eykalpirates1496]

My network not working

[@francogilson5129]

Can you able to teach us pfsense Firewall

[@kalamsenja9255]

Please 🙏🙏 make voip in mikrotik master, thanks

[@parameshbabu1879]

Ccna full course pls

[@MuhammadIrfan-ni9pb]

How to connect radius server on synology nas to our mikrotik ?