New 2023 Truck Detailing SetUp / LOW PROFILE

Hey Guys, in this video I’ll be showing you my low profile detailing setup from my 2017 Chevy Silverado. Hope you guys enjoy this video and get inspired to build your own unique detailing set up. Have a blessed day!

[@the_real_greywolf]

Bro this is perfect for people who live in associations that wont allow commercial truck. Nobody would know LOL

[@jonahniahisrael4205]

Less is better & this video makes a perfect example that you don't need much. The set up is perfect & I like the rubber lining, I'll be doing my interior the same way ... Congrats bro.... Hustle y Mucha suerte

[@469christian]

Gracias bro! 🙏 & yea I just like to keep it simple for my everyday use. Just carry what I need.

[@FlavortownFreddy]

What a genuine setup and this explains how you dont need a massive setup to run a business...respect your hustle brother and sending you wishes for your business PS - great video and narration, I couldnt tell if you were nervous or not..Cheers!

[@Misfyt67]

Dude you are brilliant!! I was looking to spend 7K on a bed unit and would have to remove it when not using(I live outside of Memphis) but with this design I will save THOUSANDS and won’t have to worry about stuff disappearing if I walk into a store! Thanks for sharing and keep up the great work!

[@469christian]

Thank you, glad this has help you!

[@in2detailing]

Really good set up. You are very practical and that is all you need to be productive. You don't need to spend a lot of money to be successful in this business. Way to Go!

[@anthonycordova6076]

Well done bro! I now have a van but I sometimes regret getting rid of my pick up truck because of what the vehicle itself can do aside from the wash business. More power to you brotha!

[@469christian]

Thank you!

[@juancarlosguillen593]

Thanks for this video. I'm only a couple hours away in Utah. Used to live in California and I wanted to start my business for detailing but became a barber for a couple years, I really just want to get my LLC for this detailing business because I enjoy it. It's like a form of art from start to finish. Yeah, you might have been nervous but it took some guts to post a video like that which motivated me to begin my journey into this detailing business. Thanks again brother. Stay up.

[@469christian]

Thank you bro!

[@abdelrahmanjawhar2592]

Thank you very much. Great video

[@thesir8028]

Wow! Excellent setup. Very well organizes. I do have 2006 Nissan Titan and I think this setup on my truck is great for me to start detailing car. Well done.

[@469christian]

Thank you!

[@erictawlks1797]

This is an awesome setup man. Thank you for sharing.

[@dainperrault585]

Looks good man! And as u do more u have plenty of room for expansion in your set up

[@coryhaynes6716]

Unoclean has an heater 3 gallon extractor for under $700 don't have to go straight to an $1000 dollar mytee. Loving the setup, great job on the customized touches, stay up.

[@florencioadame867]

Awesome video brother I just probably started my own detailing business and Phoenix It is proof that anything can be done Keep it up man Will be waiting for more videos

[@469christian]

Thank you bro 🙏 best of luck for your business.

[@ghilleinthemist2994]

nice clean minimal setup mate, I’m setting up my truck very soon, so this has given me some ideas and inspiration! also great job for a first video 👍🏼

[@469christian]

Thank you! I’m glad this helped.

[@edwincardenas3098]

I love the plywood and plastic liner idea !! Gonna have to give it a try

[@EileenTheCr0w]

This is nice, people overcomplicate things and think you need a massive setup with a fancy van, but this is almost as good and less likely to get messed with when you're not working.

[@469christian]

Exactly!

[@jesuspacheco8301]

I’m about to get started with a pick up truck and been looking at ways to set it up. I like your setup man! Gave me a really good idea. Best of wishes to you and good luck on the grind! 🔥

[@peakbagger2014]

this video was very enjoyable to watch!!!

[@BaybG732]

Excellent!! Thank you for sharing!

[@YuckBox]

Thanks for your view bro. I've been looking into different strategies and the sliding board method can be used in a many ways.

[@469christian]

Glad it was helpful!

[@jmore501]

Looking to get this type of setup. Thank you. You convinced me with this one here brother. God bless you and you're business.

[@469christian]

Thank you 🙏

[@SeanRaynon]

Excellent video learned a lot of takeaways. I'm in the process of setting up an F150 w/a Lear campershell

[@stevensanchez7740]

🔥bruh rhats a dope ass setup

[@Angel_detailer_772]

Nice simple set up , I have the same truck and thinking about going mobile ! Good job bro thanks for the video 👍

[@calebnelson3785]

Looking to set up my 17 Silverado as well for another unit. Thanks for the ideas my man. Keep up the good work!

[@michaeljordan6568]

Wow 🤩 Excellent organizational skills!!!

[@469christian]

Thank you!

[@mtnkrew]

First video? Dude you nailed it with this setup. Keep hustling and hope to see more of your videos

[@peted7687]

Fantastic brotha!!! Nice setup. Simple is better. Time is money.

[@469christian]

Thank you!

[@realcleanecspressurewashin6387]

Change that hose to a 1in hose, 1in to feed your pressure washer.

[@terrancetilghman863]

Thanks broski I have a ram 1500 truck and I'm going to try the same set up... I will have questions in the future...I just followed you... Let's get it 🤑

[@fokanerantsieng4642]

Thanks for sharing an informative video. Love your setup and will help me for my setup. 🙏🏽🇿🇦

[@469christian]

Thank you, glad this helped.

[@joseherrador8546]

Nice thanks for the info very helpful, look good!!

[@Tony_TeleVision]

I love your setup a lot ! Good work !

[@Bigworm928311]

Great job on your 1st video and nice job on showing us your setup in detail. Keep up with more videos. 👍🏻

[@469christian]

Thanks, will do!

[@ddautodetailing]

Very nice setup! I like that you're able to pull it out if needed 👍!

[@luisreyes4294]

Great bro maybe I need to downsize to something this clean and simple! I have a trailer and carry everything just in case but it gets frustrating when you’re constantly moving things out to get to other items!

[@469christian]

Yes bro simplicity is the best way I believed. Just take the stuff your really going to need.

[@Tony_TeleVision]

I love your setup a lot Good work !

[@NoLurp]

I appreciate this video. It gives me ideas if I decide to continue to use my truck. Though I do plan on building out a van eventually.

[@469christian]

Glad it was helpful!

[@GreatestEver-rf2yg]

Came out clean player

[@genecoppin8145]

Great video, great presentation and great set-up. Thanks

[@469christian]

Thank you 🙏

[@JoeAndMattsDetailing]

Good job keep going forward. I’ll be running my business for four years.

[@469christian]

Thanks you! That’s awesome man, keep it up it’s a blessing to be a business owner. Better then working for someone else.

[@keyco6472]

Very clean setup ,

[@ciscogarcia3463]

Well organized and nice set up..

[@elculichiculiacan94]

A question my men what about when you turn your pressure washer on its so closed to your generator it could burn your generator or your foam can

[@469christian]

Hey buddy I haven’t had a problem with that, the exhaust air is only hot to burn when your your like and inch away from it but anything farther from that all you feel is warm air.

[@BigJim_909]

Very nice set up. Impressive. 👍🏽. Debating on doing a lowpro set up in my 2020 Silverado. I just really don’t wanna carry extra things in my cab. Probably no way around it though! Great ideas!

[@469christian]

Go for it!

[@mrandmrsm4198]

Dear Chris, Congratulations on your first video! It is simply amazing and honest. I’ve been watching tons of KZbin videos and nothing made sense. Your was exactly what I needed to see and hear. I have a few questions regarding the connection of the water tank to the pressure washer. First, what is a gravity connection? Can I use the Adam’s pressure washer 2.0 instead of the predator’s ? Thank you to those out there if they can also please share you comments. God bless you all !

[@469christian]

@Mr and Mrs M thank you for your comment appreciated 🙏 Gravity fed is just water that flows through out the water tank to the pressure washer without a pump. It’s just the natural water flow. You can use the Adams pressure washer as well it will work.

[@brandonshea1521]

Amazing set up! Your set up is perfect.

[@469christian]

Thank you!

[@kennovakowski1246]

Good job for your first video 👌🏻 well organized set up. 👍🏻🇨🇦

[@469christian]

Thank you, appreciate your feedback.

[@contentcreatorcooksey3046]

nice setup! looks super clean and efficient.

[@nofsgiven3855]

I like it super clean set up man I’m going to do something like this for my Silverado

[@469christian]

Go for it bro!

[@nofsgiven3855]

@@469christianhey bro have you tired using a pancake compressor with that generator? I’m buying a dewalt with the same 3500 wattage and idk if it will be enough to power it.

[@micktaylor7937]

Nice job. Smart set up and affordable!

[@469christian]

Thanks!

[@edreiguerrero1817]

I like it 👌

[@erikpitt767]

This is an awesome set up man well done! If you don’t mind me asking, where did you get that size of a water tank?

[@user-ol4gv5gx2n]

Hey brother what's the best way to find work and steady work..? And also what is the adapter called on the side of your motor to run the pressure washer .? And last question can you make enough you think to live off I'm out of Florida.. awesome setup n video thank you....!

[@elegancemobiledetail]

Excelente set up saludos amigo mucha suerte

[@469christian]

Muchas gracias. @LIZANDRO VLOGS

[@spencerjones7903]

Can you drop the links for everything. Perfect setup

[@nfbusdfnbkjdfb]

Great idea!!!

[@rafaelpaixao7441]

Your set up is very good. One question: Where did you buy this water tank? The size is perfect. Thank you

[@zachpearman6556]

What brand is that bed cover? I like that it opens all the way

[@469christian]

I got it on realtruck.com it’s called The Gator Fx3 Tonneau cover.

[@kevindominguez4470]

Beautiful set up bro 🤙

[@enrirod89]

great job bud,nicely done. where did you buy the tank at? I can't seem to find a low profile for less than $400

[@469christian]

Detailing.com they have it at $300

[@JrSantana714]

Good set up bro . Like this video. Good ideas . 🙏

[@469christian]

Thank you!

[@Raskel213.]

Great video brother! 💪🏽

[@bilal-5706]

What nuts and bolts did you use to install the equipment like pressure washer hoser reel and generator to the plywood?

[@melvincastillo7524]

Nice set up 🆙

[@Danieltorres-b2d]

Ur brushes on the side of the generator don’t get melted from the exhaust of the pressure washer ?

[@theshow70224]

Sup man! Sweet video! My question is your slide out set up. What wood you use? You just drilled some whose and anchored them ?

[@ositoandhisadventures]

Great video love the setup man keep pushing 🖤

[@keyzopendoorz123]

Brodie where you got that 65 gallon tank from

[@calebterry2719]

Dope setup. I have my on a 2017 Tacoma short bed. 50 gallon water tank. 4500 inverter generator, pressure washer, ridgid air compressor and 2 hose reels

[@469christian]

Thank you! That’s awesome man I’m actually curious to see how you fit things in there since they are way smaller specially a short cab.

[@calebterry2719]

Do you have an ig? I would love to send you a pic of my setup.

[@469christian]

@@calebterry2719 yes it’s dirty2clean_autodetailing

[@kobyrobinson5325]

@@calebterry2719 bro I have a 17 taco short bed. How do you fit all that in there ? I have a hard time fitting what I got.

[@calebterry2719]

@@kobyrobinson5325 Saturday I’m going to upload my first vid for KZbin and it will explain my setup bruda! I’ll let you know when it’s up so you can check it out

[@simeanackleh9720]

What’s your pricing like on a run to someone house to do a wash? Do you have different levels of washes?

[@raulmontano9587]

I love your set up bro!!

[@469christian]

Thank you 🙏

[@josholand]

great job my man!! love the setup!

[@469christian]

Thank you! 🙏

[@AttentiveFinish]

Great setup!

[@469christian]

Thank you! 🙏

[@boristeplitskiy7632]

Can you list everything in your setup and possibly link all items. I want to start in my area I just don’t know where to start. I’m very concerned not having a water supply system. I have no way to fill the tank

[@mtownmayhem179]

Hey great setup, can you tell me where you got your water tank from?

[@luisreyes4294]

Does that pressure washer come ready to go? Or did you need to buy a pump or something

[@germanbello96]

Great set up man. What brand is that water tank?

[@davidsteckley8846]

What do you do on rainy days to keep income flowing

[@Nimbus.]

thanks for sharing

[@jules198625]

Great video

[@dmgproductions10]

Nice setup👍

[@MiCrazyCasa]

Sweet setup. Went to Vegas this past summer. It was 115 degrees in the day & like high 90’s @ night. How do you guys wash cars there. To hot!

[@wash.wax.shine.detail7554]

Use your shop vac for a blower, to blow water from the car, work's good and save some money

[@josephknowles9015]

Very Nice

[@KyleGreenSpeed3]

Can you send me a link to that bed cover I want one that opens up all the way

[@ericflores7929]

Where did u get the plating done looking to do the same thing

[@DanielsAutoDetailing]

Solid video

[@Nifty_RC]

What water tank where did you get it?

[@sdhighroller]

What did you use to glue the foam mat to the wood?

[@motovlogger_2341]

What kind of bed cover is that ?

[@sdhighroller]

how do you fill up your buckets?

[@loganhoward4599]

Hey bro, how much does the water tank carry and how many jobs can you get done with 1 fill ?

[@dajoncoleman2958]

Hey man this is a clean setup I want to know what you hang your spray bottles on?

[@angelaguilar6371]

What did you put on top of the wood?

[@boscos5287]

What is the brand of your bed cover?

[@ms3326]

Nice setup!!

[@469christian]

Thank you 🙏

[@ElChemaHernandez]

Can you tell me where I can buy that low profile 60 gallon tank?

[@cepillin32able]

Where did you get or buy the water tank?

[@Classictouch805]

How did you set up the pressure washer yk take it off it’s original place and bolt it on to your plywood?