@JuliusJones-jj8go 12 күн бұрын
That pump saved my relationship with my 24 year old girlfriend
@captlogic9621 Ай бұрын
Just a heads up, seems like loosing pressure after initial squeeze could be an air leak in line or porportioner. Take porportioner out of equation, go straight from water to pump, if it solves your problem, you know there is an issue with your porportioner. Had an issue with one of my batch buster valves. Went through a few pumps due to cycling before i figured it out.
@prestigepropertywashing Ай бұрын
@@captlogic9621 long story short it was my 5/8th chem line on my reel. Had to swap it out and have 300’ of 1/2inch and it does just fine. It’s a remco issue.
@Under_PressureSW 23 күн бұрын
@@prestigepropertywashingso the 5/8 was just a little too big for it? Runs good with the 1/2 now?
@prestigepropertywashing 23 күн бұрын
@@Under_PressureSW yes runs good with a half-inch chemical line. I definitely recommend checking out Christopher Runions video on the way he has his set up. He has the same pump and it looks like he has the best efficiency I’ve seen.
@braunsch4901 18 күн бұрын
Might need small nozzle tips, what size pump are they made for? If it's letting too much water flow the pump won't be able to keep up with the pressure
@riversidepressurewashing2024 27 күн бұрын
quick question if you dont mind me asking.. what did you use for leads when first starting?
@prestigepropertywashing 15 күн бұрын
@@riversidepressurewashing2024 door knocking, Facebook posts, neighborhood groups, local veteran gave me a few jobs to take care of for him that he couldn’t get to.
@Worldpeace-su3qk 6 күн бұрын
Do you rise pump After every job? Need accumulator to keep the pressure up . What size of hose are you working on with ?
@prestigepropertywashing 6 күн бұрын
@@Worldpeace-su3qk I flush it with water until fresh water comes out of my gun. I’m running 5/8 from tanks to proportioner to reel then have 300ft of 1/2 on. Had an issue(lack of pressure with my 5 orifice soap tip with 5/8 inch chem hose and when I switched to 1/2 inch it was fine.
@BuzzFlash63 Ай бұрын
Bad idea to mix electrical components with pressurized liquid. Just saying, not a good idea.
@prestigepropertywashing Ай бұрын
@@BuzzFlash63 💯
IMJOSHV - Car Detailing and Reconditioning Tips
Рет қаралды 193 М.
How to fix a pressure washer that has no pressure | Replacing the check valves on my pressure washer
Home Built Workshop
Рет қаралды 142 М.
Pressure Washing Mastery
Рет қаралды 592
Berry Little | Littles Pressure Washing
Рет қаралды 8 М.