New Audiopipe DSP ADSP CLEAN APP car audio Bluetooth DSP

[@2011joser]

Great instructional video. It’s always great when a channel features something other than a monoblock amp.

[@BigD751]

High pass at 50hz for a sub seems a bit high. Maybe start rolling it around 30. A lot of dubstep will hit as low as 32 or lower (although you need 15's to really feel it with power)

[@d0nk3ybrain57]

I loved those soft blows to the people who don't know.

[@timothy5977]

5k on a 100amps🤭

[@jeremyhearn8941]

How do you feel it compares to your review of the MARTS BTX8?

[@HiFiVector]

They are both good. The audiopipe has a little nicer looking app. But the marts has higher output to out voltage on the RCA’s. Audio pipe can only output about 1.5v clean which is not bad but some people prefer higher RCA output voltage like the marts has. Me personally I don’t feel higher RCA voltage does too much. I’ve tested side-by-side and I did not hear any difference so just depends on your opinion, but I really like the Mark DSP myself.

[@brantiebrandweer]

Can you doing a video how to use this dsp with only the knob ?

[@SouthFloridacarshows]

Great explanation. Great video and product for Audiopipe. Helix mk2 mini for me.

[@csj9619]

Zapco and Helix DSP units are really pricey, but they are very effective and do everything I would ever want. I've tried low-priced DSPs and was very disappointed in the performance. I'm not brand-loyal and not wealthy, but loathe wasting money on stuff that sucks. Keep saving until you can get what you really want, not what you can afford right now.

[@2011joser]

Out curiosity what cheap dsp units did you try and how did they fail you? I went through the same experience a few years ago with in dash equalizers until I settled on an Audiocontrol unit. I’m about to take the dsp plunge myself.

[@minus3dbintheteens60]

I know right, how bloody hard is it to build a DSP that has a USB port that can decode audio FFS 🤬 I mean honestly. What is so hard about it? The only DSP I know of worth buying is the Zapco HDSP V Z, which costs a fortune, but it's nice. I'm forced to run dual headunits for now, to support enough channels and EQ (Pioneer P99RS + Eclipse CD7200)

[@allmotorhash]

Same china stuff more price

[@justinatmidi]

Not everyone has the same goals, very selfish to think everyone is after what you are searching

[@c0uchsl0uch]

What's the input EQ for? Don't you only need a output EQ? Also if I set the subwoofer crossover at 80hz, what do I do with the crossover on the subwoofer amplifier❓ Thanks

[@HiFiVector]

Input is a way way to eQ everything then you can tweak each output individually.

[@DonnevenDon]

Can you doing a video how to tunning with only knob ??

[@HiFiVector]

I’ll try

[@James-wo1np]

Does the bluetooth allow you to use it as an input signal

[@undernature2799]

I've been thinking of changing hu but ill need a dsp. Running the 80prs pioneer for ions lol just because of it's cleanliness and built in dsp. Wanting to put the old magitune clarion in. Well explained and very much appreciated. 👍🤞

[@hopskustomaudio]

Is it possible to use this with a microphone to auto tune? Or know of any that can?

[@RickyRing-e1z]

This or the expert px2?

[@hectorramos4773]

I have a Samsung Galaxy Fold 3, an Android phone and I search for the name in the Play Store application and I don't see what I can do. Can you help me?

[@HiFiVector]

All I know is that some android devices you have to install the apk file. So you have to install the apk file on your phone it’s not automatically installed on some android. You can look up online how to install apk files. But the download should be here at lower part of the page. kzbin.info?event=video_description&redir_token=QUFFLUhqa1JwMmRDNnFtYzRzb2Jra2V0XzFvLXRLSEZkd3xBQ3Jtc0tuQ1dhNVFSZG16djFwWUo4Rko3TGdqcFkyeGtLbUdCc0VsWENqdHNOSTJTeDEtOVo4LWlydjFTUk4xTnFMNkhoVHdzMS02d3FQQXZPZ21ZMGdkOEpkdXN5a1VUWUs5SUN2VXNPR2N6bEVHYjJmbXVGQQ&q=https%3A%2F%2Fbigjeffaudio.com%2Fcollections%2Fdsp%2Fproducts%2Fmarts-digital-bluetooth-8-output-32bits-96khz-dsp-btx8-dsp%3Fref%3DHiFiVector&v=XPCIKEG3ToU

[@HiFiVector]

This is the link the QR code takes you to download the file: www.coresounds.net/AppFiles/Marts-Digital.apk It is a direct download link so it should download the file as soon as the page loads. In order to install the file, the customer will have to go to Apps > Settings > Security and enable "unknown sources" and save the settings. Once that is done, they can find the file in their downloads folder on their phone and open the file to install it

[@southnyourmind]

Maybe you can help me out. My audiopipe dsp won't output in stereo. In my stereo, I fade to left, or right, and both channels still play through the DSP. I verified that the RCA's are correct. When bypassing the DSP, the amplifiers do fade left to right, but with the DSP, they don't. Have any ideas? I've changed the routing, and nothing seems to change. Still playing through left and right. However, when faded to the left, there is no sound. Fade to the right, and both channels play. Haven't had this problem as I've ran this for 2 years. Installed some new amps, and boom. Troubles all around. Amps fade fine left to right when I plug straight in.

[@HiFiVector]

Sounds like you did all the right checks to start pinpointing the issue. With what you said it sounds to me like the DSP is faulty and not separating the signal correctly or there is a short inside combining the 2 signals.

[@southnyourmind]

@HiFiVector I'm thinking maybe it's a short, because now suddenly I have engine noise coming through my speakers. There wasn't any before I installed the new amplifiers. And if I plug straight into the amplifiers, there is no noise..

[@southnyourmind]

@@HiFiVector I ordered a hertz dsp S8 to replace it. I had thought about it before, but I was like nah, I'll just keep the audiopipe since I love the app.

[@HiFiVector]

Yea I hear ya, I like the AP app as well. Let me know how you like the hertz.

[@southnyourmind]

@HiFiVector good morning. So I've got the hertz installed, and I love it. Had to tinker with it for a while ... If you get one, make sure you put it in expert mode. If not, it limits the woofers to 80hz. Midranges are limited to like 500-600. Anyway, so with the hertz, I get a loud pop on from my amplifiers, I did not have that with the audiopipe. Also, I have a lot of ground noise... But it's not coming from the RCA's. I unplugged them, and still get ground noise. Even with the audiopipe, when I installed the new amps, I was getting ground noise. However, I'm happy with the hertz. But the app could be better.

[@montesino8542]

Morning hoping you are fine, great channel. Love your videos, can you please give me an order of your recommendation for DSP, in order like Stetson, marts, taramp, audio please, etc, thanks

[@HiFiVector]

For the budget DSP my order would be Marts,then expert px2R then audiopipe ADSP -clean-App. And thanks so much for the kind words.

[@marquetterichardson6529]

​@HiFiVector how do u save settings on mart btx8 dsp

[@jasonvines4050]

What DSP you run in your ride?

[@HiFiVector]

Currently I have the expert px2R but I also like this audiopipe.

[@jasonvines4050]

@@HiFiVectorI’m new to the dsp stuff and looking to purchase one soon. What would you recommend for a beginner?

[@HiFiVector]

You’re welcome, they can be overwhelming if you are new but man they definitely add so much control and adjustment to your system.

[@850CANE]

​@@jasonvines4050the expert px2 is a great beginner dsp

[@Loudkona]

Sadly the app is not supported on my phone

[@minus3dbintheteens60]

Yo, I'm looking for a device that can invert phase, so like a unbalanced to balanced line converter preferably, that would be cheapest too. The reason is I want to be able to feed an amplifier an inverted and non-inverted signal to bridge. Who knows of a device that I could research?

[@dongodeken1348]

Wd

[@betogaxiola4527]

EXPERT DSP ITS CHEAPER AND SIMILAR APP

[@fatoldguy-mh1rt]

Thanks for the information. Drink more water.

[@HiFiVector]

Thank you, I will