NEW BILT HAMBER | TOUCH-LESS V2.. AMAZING STUFF

[@Downstar]

Good video. Nice to see you are one of the few ones that showed that just pressure washer only wont do much on that traffic film. So many people say that Pre washes doesnt do much, that its just the high pressure water that is cleaning up the panel, you proved they wrong ;)! BH Touchless is a great product!

[@itsallinthedetailing2784]

@@Downstar it’s feedback like your mate that drives me to make more content so greatly appreciated it , please consider subscribing 👌🏻

[@Downstar]

@@itsallinthedetailing2784 sure, just found your channel yet. Definitely will subscribe! Keep up the good work!

[@itsallinthedetailing2784]

@@Downstar thanks mate 👌🏻

[@chrisbarrow9909]

Best to use in pump spray as in a foam lance you need to use much much more product for same result, i use Kwazar sprayer 20ml product to 1000ml water.

[@itsallinthedetailing2784]

Yeah I agree it’s more cost effective to use in sprayer but more fun in Lance 👌🏻please consider subscribing

[@simonsimon4780]

Hi buddy tell me please how many ml of product per 100 ml of water I will need to add to get 2% PIR in foam lance. Many thanks@@itsallinthedetailing2784

[@andicampbell8621]

@@simonsimon4780 You will need to find out how much water it takes to empty the cannister/bottle then do the calculation. Lots of videos on how to do it mate. My bottle holds 850 ml but takes 9000 ml flow through to empty it. 2% is 180ml of product.

[@simonmarsh5007]

Been using this on a daily basis great stuff ,makes the hole prewash so easy ,and I’ve done some filthy cars with that haven’t been touched in months ,👍

[@itsallinthedetailing2784]

Yeah I agree Version 1 was brilliant but this version 2 stuff is phenomenal, no need for any more citrus, definitely will be my go to pre wash snow foam from no on. Please consider subscribing 👌🏻

[@jonnyvt6602]

Great video, iv jsut had mine PPF and ceramic,.so really gonna try this touchless system. Love thr way you illustrated by using my jet wash first, then the cleaned patch, the snow foam and thr final rinse; this is the demo ive been looking for! Cheers

[@itsallinthedetailing2784]

Wow thanks for you great feedback mate honestly means a lot, this KZbin is a hard game with so many amazing people who create great content, but it’s comments like yours that keeps me going 👌🏻

[@michaelbutler4219]

Incredible results Danny, I'm definitely going to get some of that. Great video as always. 👍

[@itsallinthedetailing2784]

Thanks Micheal, it really is worth buying absolutely phenomenal stuff 👌🏻

[@triggerhappyautos]

Looking forward to picking some up! Glad to see you on the BH train mate 👌👌👌

[@itsallinthedetailing2784]

It’s phenomenal stuff bud, no need for citrus this is a snow foam that cleans 👌🏻

[@Jomo-x6n]

Just curious. Why do you rinse from bottom up? I always rinse from top down so the muck don't run over previously cleaned areas.

[@itsallinthedetailing2784]

I always rinse from bottom to top, because you can see where you have been and can get the most out of the jetwash and chemical 👌🏻please consider subscribing

[@britishbulldog3009]

Ordered this and can’t wait to use it. My usual go too is Garage Therapy V2 Snow Foam, which is excellent. Be interesting to compare them…

[@itsallinthedetailing2784]

I used that GT v2 snow foam the other week and I’d say this is better, but a side to side maybe a good shout for a video 👌🏻

[@the_jnlt_channel]

Powerful stuff, v1 was great, if this is better amazing 💪💪

[@itsallinthedetailing2784]

It’s my new go to pre wash snow foam 100% 👌🏻

[@pigeonpoo1823]

Excellent demo's there. Used for the first time today in an IK sprayer at 2%. Smells horrible but don't care. Cleans like you showed with the swipe test. The marketing blurb about being free rinsing is spot on. Will it replace Autofoam? For winter, Yes. Absolutely. It does seem to have eaten through Polar Seal though so could I reduce the dilution ratio a bit? Maybe. Either way, it's a superb product. I'm glad you rate it! And thanks for showing it on 2 cars.

[@itsallinthedetailing2784]

Cheers bud really appreciate the feedback, I really enjoyed doing this one, now I didn’t think it smelt that bad through the Lance, and I had to show it on a dirty then a filthy car, just to show the full cleaning power and it didn’t disappoint.. 👌🏻

[@leonbradley]

Awesome result.love bilt hamber . Would you say its an improvement on autofoam.

[@itsallinthedetailing2784]

Yes this is phenomenal stuff really does clean, so much so I’ve ordered another bottle from slims detailing, please consider subscribing 👌🏻

[@KarlHampson-TCB]

I’ve heard amazing things about this product and you have proved what I have heard. Best get my arse in gear and get some 😁

[@itsallinthedetailing2784]

Honestly it’s phenomenal bud, definitely worth buying some 👌🏻

[@defaultHandle1110]

Anywhere in Australia with version 2 yet ? How can we tell ? I’m guessing since we’re other side of the planet we still have old stock.

[@itsallinthedetailing2784]

I’m sure it’s on its way mate, it will say on site listing V2, please consider subscribing 👌🏻

[@Richard_Details]

I bought some a few weeks ago and will be trying it as soon as the lovely Cardiff weather let's me 😂

[@itsallinthedetailing2784]

You won’t be disappointed finally a pre wash snow foam that cleans phenomenally well 👌🏻

[@Richard_Details]

@@itsallinthedetailing2784 sounds good. Praying for dry weather today then

[@WEZ4136]

The new version of BH Touch-Less is actually the V3, I bought this in the 1 litre bottle and tested it out on my car that had not been washed since November ish, I gave a layer of citrus APC then Touch-Less v3 over the top and then left it for no more than 2 minutes, ratio was between 1.5%-1.8% PIR, rinsed with the jet wash and I almost didn’t need to do a contact wash, it’s absolutely spectacular stuff.

[@itsallinthedetailing2784]

It’s is very good stuff I was like that on this car in video, super impressed by it so much so I’ve bought more, please consider subscribing 👌🏻

[@WEZ4136]

@@itsallinthedetailing2784 oh sorry I thought I did sub, I mustn’t have pressed it properly 😆

[@itsallinthedetailing2784]

@@WEZ4136 cheers bud really appreciate it 👌🏻

[@howell_124spider]

Looks good stuff. Ive got the ordinary touchless and wondered is this v2 much better than the original touchless?

[@itsallinthedetailing2784]

I’ve not tried the original version, but what I’ve heard it is a lot better, but maybe it’s a video waiting to happen comparing the two 👌🏻

[@ScrappersDetailing]

I've heard great reviews of Bilt Hamber, but I've never tried their products. May have to change that!

[@itsallinthedetailing2784]

This stuff is phenomenal, a snow foam that actually cleans, but bilt hamber is a solid brand to use 👌🏻

[@Otto-AutoPilot]

@@itsallinthedetailing2784 I'll have to give it a try, as whilst I'm a BH fan and use lots of their products, I find their regular Auto Foam, even in strong PIR medicre at best and still cannot get anywhere close to a clean panel wipe after use, even after two applications and dwells. Nor has any other snow foam just to be clear so I hope this is the one that actually cleans more than just a top layer of dusty dirt.

[@itsallinthedetailing2784]

@@Otto-AutoPilot I couldn’t believe it bud honestly what you seen on video is what happened, this got some serious cleaning power, 200ml to 800ml water or 100ml to 400ml phenomenal stuff so much so I’ve ordered more of it from slims detailing… Please let me know how you get on with it and please consider subscribing 👌🏻

[@lawnboycommercial]

Hi, I would really like to know how much of this V2 did you mix into your mjjc phone cannon ?

[@itsallinthedetailing2784]

@@lawnboycommercial hey bud, not a problem I mixed 200ml of product to 800ml of water in the MJJC Lance, or you can half it.. 100ml to 400ml in the Lance, But also it’s very affective in a spray bottle using 20/30ml to 970/980ml of water, Hope this helps please do consider subscribing

[@Geeky_detail_reviews]

Can’t wait to try mine Hopefully tomorrow 😊

[@itsallinthedetailing2784]

Let me know how you get on with it ? 👌🏻

[@Geeky_detail_reviews]

@@itsallinthedetailing2784absolutely buddy. Loved this video bud

[@itsallinthedetailing2784]

@@Geeky_detail_reviews hopefully got another one coming out tonight 👌🏻

[@Geeky_detail_reviews]

@@itsallinthedetailing2784 excellent I can’t wait. Your voice and audio is very clear I noticed great work

[@decker0373]

This stuff is 100% going on the list!! Anyone want 5L of Squid ink alkafroth 😂😂. Hope you're well, Danny.

[@itsallinthedetailing2784]

Go buy it now mate 😂 I’m good mate and you ? 👌🏻

[@decker0373]

@itsallinthedetailing2784 all good here, Danny.

[@micks72malibu]

Always use touchles, fantastic product. Just ordered the mjjc foam cannoon v3, see a lot of people saying it makes the foam to thick.whats your thoughts? Great video by the way.

[@itsallinthedetailing2784]

Thanks mate really appreciate the feedback. I’m a massive fan of the MJJC foam cannons, they are well made and with any cannon you can turn the thickness up and down. But it does make it very thick on full way👌🏻

[@micks72malibu]

@@itsallinthedetailing2784 Thanks for the reply. Keep up the good work.

[@andicampbell8621]

Just started using the Bilt Hamber products and this foam AND the wheel cleaner are the mutts marraccas 👍

[@itsallinthedetailing2784]

You will not go wrong with any bilt hamber products, another one to try is double speed wax 👌🏻 please consider subscribing

[@lukenukem1164]

How much would i put in a 2.5 l pump sprayer? Thanks.

[@itsallinthedetailing2784]

@@lukenukem1164 2% pir in a 2.5litre would be 50ml of bilt hamber to 2450ml water 💦 👌🏻 please consider subscribing

[@lukenukem1164]

@itsallinthedetailing2784 thanks very much👍 Subscribed.

[@garywilson5339]

What was your dilution rate in cannon bottle please

[@itsallinthedetailing2784]

It was 200ml to 800ml of water, please consider subscribing 👌🏻

[@davida7713]

Much touchless did you use in the 1 litre lance ???

[@itsallinthedetailing2784]

Hey bud was around 200ml to 800ml of water Or 100ml to 400ml of water Cheers bud 👌🏻

[@davida7713]

@@itsallinthedetailing2784 yea going use 150ml to 550ml of water @ 2 % @ 100ml to 600ml water @ 1.5 % for less dirty cars

[@itsallinthedetailing2784]

@@davida7713 what Lance are you running it through mate ?

[@davida7713]

@@itsallinthedetailing2784 mjjc v2

[@itsallinthedetailing2784]

@@davida7713 same as mine then, internals are exactly the same

[@lawsonireland5326]

I really don't understand pir I've got a kranzle 1152 tst pressure washer but I haven't got clue of how much to put in my snow fine cannon. Please help 🙏

[@itsallinthedetailing2784]

What foam Lance are you using bud ? 👌🏻

[@lawsonireland5326]

@@itsallinthedetailing2784 mjjc foam lance v2

[@lawsonireland5326]

Mjjc foam lance v2

[@lawsonireland5326]

​@@itsallinthedetailing2784 it's so complicated 😭

[@itsallinthedetailing2784]

@@lawsonireland5326 I have the MJJC v3.0 which share the same internals just different bottles, so I use - 100ml product to 400ml water 200ml product to 800ml water That is 2% PIR 👌🏻

[@86XFA]

Why rinse from bottom up? Silly

[@itsallinthedetailing2784]

@@86XFA rinse bottom to top so you know where you’ve been, thanks for the comment don’t forget to subscribe silly