New Craftsman 450pc Tool Set

[@ICON-11-]

If that was snap-on you'd have to throw a couple extra zeros on that price tag 😂. I got the smaller craftsman 216 piece versa stack for 100 bucks (50 off regular) and could not be happier. Really nice set bro 💪

[@cacooke77]

Bought mine at a local Sears that's closing. It was 60% off! $183.00 out the door!! Couldn't be happier!!!

[@professionalamateur1549]

Wow

[@ex8280]

I always watch these videos and see how excited you kids are with these things, and just wish you are well along in your career and life. God Bless and thank you for sharing.

[@Jugc0006]

You can take a whole engine with that set. Great buy!

[@austingoleman9431]

Might have to get one take the trays out and put in my tool box and get rid of the black box

[@Mikey-ym6ok]

Man, I wouldn’t if I were you. At least you can see visually that it’s all there. They’ll run away from you if you give them the chance lol

[@jtr82369]

Good video bro, I think it is a reasonable set for the price you got. I do think they could've added far more wrenches to the top including fuel line wrenches. Hell I think they could've put a full set of medium length wrenches on the top tray and a full set of shorty's inside of the cover. I feel like they used the bit sets to inflate the piece number.

[@JuanMunoz-nq7kv]

I bought that same set back in 2017 and it’s very useful! It was 75% off at the sears where I live but I waited to long then it went up to 50% off and I bought it before it went back to full price

[@cholosoy8511]

I think as a beginner’s set it’s really good. Pretty sure it has everything you need for low to medium level projects.

[@vendetta989]

Nice set but no 10mm or 19mm wrench? No 5/8 11/16 or 3/4? That is not a good thing. Bare minimum it should have that in my opinion. Very common

[@sirplusxpja]

That's really pushing me away from this box tbh. I'm thinking more matco😈😈

[@jimf-150]

Yeah one of the most used wrench aren’t included wth

[@derekquinones8614]

@@sirplusxpja the gear wrench 243 piece kit is way better not as much bits like craftsman uses for fillers

[@JacksonGuitarsPlayer03]

Yep that sure angered me

[@dekompose]

I almost bought it for 240 but decided to research first so it doesn’t come with a 10? I have Hondas! Which set is best then please help I’m buying soon Ty.

[@1337penguinman]

The problem I have with these tool sets is they usually include a lot of stuff you don't need and stuff they'd never sell individually to jack up the price and tool count. SAE sizes are basically pointless these days, except for maybe spark plug sockets. Also, they're usually missing stuff you actually do want or have size skips. When I was first starting my tool collection I bought a set like this, but ended up having to go out and buy a bunch of individual wrenches and sockets to fill in the gaps. Cost me more in the long run than if I just bought everything individually.

[@shawnobarker3255]

anytime you can pay less than a dollar a piece for good tools you get great deal!!

[@thein1990]

Dude got 450pcs for 100 he got a steal!!

[@shawnobarker3255]

Nice set of tools there!

[@MikesGarageReviews]

I bought a nice 3/8 Milwaukee set. Sockets are square and don't roll around.

[@PFab]

They roll around. Don't lie😅

[@dakotamiller9898]

Just picked this up for 150 hopefully growing my collection soon

[@8luggarage]

Where did you buy it for $150?

[@dakotamiller9898]

Some dude locally is selling a coupe of them and they are all brand new

[@Fender0nfire]

I found it for 50$

[@dakotamiller9898]

@@Fender0nfire hell yeah

[@8luggarage]

@@Fender0nfire where at. That's a steal

[@gress12000]

10mm Is the most common size and it starts at 11 mm. Top wrenches I mean.

[@PFab]

I wish I could find that set for $100. Great deal. 😮

[@Quinten______----_-]

I use this as a "road call" set up and take it with me when I have road calls at work. Overall decent. Slot of fluff included though. Has to be 200 little bitts in there. My job gave it to me for free, not sure if id spend $400 + on this. Probably better off buying a tool bag and going to harber freight tbh.

[@richardroyster7100]

Good review. I have the same tool kit. Thank for posting

[@johnj.baranski6553]

Great video. I grabbed the 216

[@bryonsparkman1386]

I picked mine up yesterday my only complaint is that the sockets move around way to much

[@nickmills8348]

Bryon Sparkman that sucks because this whole set is basically sockets.

[@bryonsparkman1386]

Update about 2 weeks ago take it iv only opend this thing maybe 3 times and one of the latches broke clean off

[@Mikey-ym6ok]

Awwwwwwwwwwwwwwwwwwwwwwwww

[@JacksonGuitarsPlayer03]

It’s always good to have EVERYTHING especially if your a mechanic all of these tool sets are missing something they all don’t have everything I bought this one seeing it missing some things and some common tools. I bought the missing pieces. Craftsman branded also. I dig this set other than it missing some wrenches 🔧 and sockets.

[@malachijones705]

If you don’t mind… And if you can remember- could you tell me what tools were missing???

[@JacksonGuitarsPlayer03]

@@malachijones705 lol. Well funny it was missing the fricken 4 millimeter socket. Wasn’t missing anything else What I meant was it could have a bit more of a wrench selection the wrench selection is kinda crap. Plus a few other sockets wish it had but it didn’t. It’s good for the money I’ll say. It’s a nice starter. It has most of common stuff and SOME uncommon things I dig the midget wrench set it comes with probably never to barely use them but it is neat. I still have this set actually and I keep it organized. I bought it a long time ago before this comment. I have basically a shit ton of tools now I’m my own mechanic of all my crap I own. Machinery trucks cars.

[@miguelsalazar3239]

450 piece set minus alot unnecessary bits. Good looking set tho.

[@heathdan2643]

Yeah I’m gonna have to pick that up.

[@joelnystrand6843]

I'm love Craftsman tools alot but I'm have alot tools

[@indiomonk123]

Nice set. Enjoy!

[@quickfixwithj9539]

indiomonk123 thanks!

[@joshuamoore1091]

I like 12 point sockets because I also like rounded bolts... Smh

[@romanjaspe4172]

Thanks so much for the video

[@jamesguralski5156]

What's the 50% off coupon?

[@notthegoodguy7344]

Its sad we dont have this in the Philippines 🇵🇭 I checked amazon they do shippingbut it cost more than the like if it cost 450$ the shipping will cost 600$ thats sad.

[@quickfixwithj9539]

TheGood Guy man that’s ridiculous!

[@keithcaldwell7187]

Good video. What are the dimensions for length, width, and depth on one of the drawers? Thanks!

[@AlphaNerd132]

i'v seen that in a lot of the case sets, all of the deep sockets are 1/4 drives. those deeps on the bottom drawer, are they 3/8th drive?

[@garciasgarcias3900]

What's with the bag in the first compartment?

[@dlroto]

Sears is still around? Where do you live?

[@emmanuelortiz2490]

In southern California there's an easy 10 stores

[@tractor2899]

Also in West Virginia, they're all over the place.

[@gurutrips9440]

We got one here in oregon

[@thomasbates5157]

They craftsman at Lowe's now too

[@twistedhillbilly6157]

Lowes owns Craftsman now.. they destroyed the brand like they did to everything else they touch...

[@user-xn5ji1fo9y]

Buenos días compa que vale esa caja de herramienta

[@MrPAULONEAL]

How did you remove those screws from the top?

[@aguilayserpiente]

Fine review. Part number?

[@juniormendoza8479]

Bought mine today for $219 without taxes

[@wizard3z868]

i bought just the empty boxes like 6 yrs ago they wanted like $60 a pce some how i did it online pick up in store all rebates and discounts paid like $18 a pce and than got like $53&¢ in store credit

[@yacubrana5280]

I like this tool

[@loismiller928]

When did it the lighter the set the better

[@WildWest4057]

Are there no u joints?

[@mandoramirez1205]

That was a great deal you picked up, did it come with ratcheting wrenches, can't believe you only paid two bills for all that, I must be shopping at the wrong store.

[@jamesguralski5156]

Trade the socket wrenches in at Lowe's. If to sloppy. 11 to 17, Wtf. 10 is very common and 19mm is a big common size to. I got the 444 pc set for $299 and the 409 pc set for $650. The 409 was really good quality. And lifetime warranty. Just trade stuff at Lowe's or Ace hardware.

[@philipthomas6808]

Ace Hardware's policy on Craftsman is not as generous as Sears was; I had a 150 piece set I bought at Sears in 2004, and after about 10 years of sitting in the trunk of my car, some of the tools were rusting and in 2015 I took the set into Ace since all of my local Sears stores were closed and asked if I could trade for an equal or similar sized tool set, and the store manager said No, they will only replace Craftsman tools if they were sold at an Ace store and with a receipt too... I was pissed and frustrated to say the least, so I told her, I will never buy Craftsman tools at Ace, and I left the store...

[@wizard3z868]

@@philipthomas6808 ya i found a lowes and other ace hardware stores wld do an exchange of 10 pces at a time daily. and than my local ace said the b&d rep authorized them at their discretion to exchange full sets. i live in the north east usa

[@user-yz8dv6rp1q]

Метрические ключи только на 11-17 шо за дискриминация метрической системы?у меня другой вопрос почему производители не могутдогоыорится до набора в котором будет одинаково широкий выбор инструмента системы имперской и метрической?(этож позволит вывести такой набор на оба рынка,а значит больше продажи,а значит больше денеж выручат)

[@salgonzalez908]

I’m dreaminggggggg of this set.

[@bryonsparkman1386]

Dont dream to hard the tools are good the case it comes in is junk ur sockets move all over the place and the front latch will is weak and will break like mine did

[@abc123lov7]

Hope you found 1..got mine today..270.

[@elainenilsson5472]

Will this fit on the Versa Stack?

[@thomasbates5157]

This 1 does not but craftsman is starting to make sets that do

[@tyerahenderson9650]

Would this be good for g35? I’m trying get tool box for my boyfriend.

[@quickfixwithj9539]

Flawlesswithketo it would be a good set.

[@adriancantu6045]

How u like it?

[@quickfixwithj9539]

Adrian Cantu- For the price it’s a very nice set to have for the house or even for the beginner mechanic.

[@adriancantu6045]

Nice

[@Max_Arjona]

It doesn’t even have a 10mm combo wrench? “Common sizes” my ass.

[@lucasornelas6113]

Lol

[@onefineassguy]

I just opened mine and noticed that I was missing a slotted screw driver bit number 2 on the bottom shelf on the left side. Did anyone else have it missing? It was in those holders that hold 12 bits...

[@bryonsparkman1386]

Mine was in the screw driver its self when I bought it

[@LAC32Griffin]

So you got it for $100 after the 50% from the sale price of $200? Damn what a pick up, good job.

[@dr_lugnutz5204]

I just found this set on dhgate for 37 dollars. Sweet deal

[@gurutrips9440]

@@dr_lugnutz5204 did you buy it ?

[@dr_lugnutz5204]

@@gurutrips9440 yeah but apparently it was a scam seller on there. Got a refund but never got the tools. I already have tools but thought for that process I'd keel them in my car.

[@gurutrips9440]

@@dr_lugnutz5204 awe man that would have been a killer deal ! Better luck next time bro, I'm also on the hunt for some new tools!

[@pnwexplorer5343]

Does anyone have the dimensions of the box

[@Criticalthinkersonly]

Is this made in USA

[@VictorAugusto86865]

500 for 200 50%off? 1 taco 2tacos😂

[@fireblade95]

Where are these made?

[@mattblackman9211]

China

[@kevinfades]

My opinion it don’t matter were it was mad it has lifetime warranty can exchange as many times as you need tools are like humans humans get sick break down don’t always last

[@fireblade95]

@@kevinfades can you exchange them at the side of the road ?

[@fireblade95]

Can you exchange them at the side of the road? Or should staring at a broken tool fix it? Stanley tools had a massive manufacturing plant in my town , there for years, good tools , good jobs , obviously moving production abroad helped the redundant staff and their families enormously and didn't make the board of directors more money they were more bothered with quality which as everyone knows is paramount in China 😐

[@Sunbear415]

China..... that’s a shame

[@Svyatoslav226]

💯

[@diegodavila1402]

Donde comprar en España?

[@Puro4letraspuroMAGA]

En walmart

[@guadaluperios7653]

Mugrero=💩👎👎👎👎

[@Puro4letraspuroMAGA]

@@guadaluperios7653 ya lo a usado antes?

[@Puro4letraspuroMAGA]

@@guadaluperios7653 usted usa puro snap on?

[@user-yz8dv6rp1q]

Я готов доже переплатить только дайте мне нормальный набор инструментов в котором инструменты будут представлены и в имперской системе и в метрической и это не будут наборы-кастраты(11-17,4-14мм,и не будут такие кастраты от имперской системы,и это будет что то нормальное вроде деволт,милувакии,крафтсманн)

[@AaronSouthall-xm8bo]

I personally don't like this kit the 230 piece kit is better

[@shyamookushwaha5851]

How bay IT

[@loismiller928]

How's he going to sell tool's and not know hexagon bits

[@antoniocarreon3086]

Excelente herramienta

[@shehzadahmed9367]

No any screwdriver

[@jrap170]

Months from now it will turn into rust

[@professionalamateur1549]

Lol why?

[@ChrisTheMobileMechanic]

Only set in the world with 8 point sockets!!!??? Hahaha

[@twistedhillbilly6157]

WRONG,, my set from 35 years ago has a full set of 8 points... People that know what they are is harder to find.. hahahaha

[@marcodeleon5944]

Too bad its all china crap now, and that's from most tools now. I was able to inherit lots of tools m=from my dad and brothers, ALL U.S. made. But great starter sets.

[@pitdawg6418]

Out of 450 so called "tools" 400 are fkn bits you'll NEVER use. Lmfknao Hahaha!

[@tymz-r-achangin]

Completely stupid of communist china craftsman not to give us the obviously needed adequate space for us to store additional tools. It's a given that nearly all users will want space for needle nose pliers, end cuts, slip joint pliers, channel locks, and a variety of other COMMONLY used tools

[@pitdawg6418]

Sad how Craftsman makes such SHITY 1piece latches to that tool box. After a FEW open and closing that tool box latches they will break off or crack!

[@twistedhillbilly6157]

Craftsman went straight in the toilet when Lowes bought them.. That plastic box won't last 3 months

[@JordanStar2323]

Lowe’s didn’t buy them Stanley black and decker is the daddy same people who make dewalt

[@twistedhillbilly6157]

@@JordanStar2323 I stand corrected. Lowes got the rights when they bought OSH (already had the rights from a KMart deal) and put them out of business for good but Lowes was able to keep the craftsman rights.. . As far as I am concerned,, ALL of the companies mentioned SUCK!!!

[@JordanStar2323]

@@twistedhillbilly6157 nooo lol search it up Sears can still sell craftsman for a decade more but black and decker bought craftsman for 900 million

[@twistedhillbilly6157]

@@JordanStar2323 Noooo what?? I didn't say a fucking thing about Sears.. I am 100% correct about OSH (where Lowes got the rights) Why are you laughing out loud at yourself??? Don't forget your helmet...

[@wizard3z868]

tht plastic box has been around at least 10 yrs and after 6 yrs of me abusing one i use it still stays shut and the top clips still hold

[@ahmetyasingulbeyen6332]

DEWALT Mechanics Tools Kit and Socket Set : amzn.to/3C7xrde