New Cylinder Head For The Mini Cooper!

[@gstree]

For what it's worth in cases like this, I have had great success in wire brushing the pit marks and applying one of the high temperature 2 pack plastic metals. Once it's cured and sanded flat it will support any part of the gasket as long as it's not inside of the fire ring. Alternatively it can be welded, and if the welder is really good you should be able to skim only a minute amount off of the head to sort it. I have been a motor mechanic since 1963

[@seasiderjay5240]

every repair job on mini's starts off small and snowballs was not surprised at all with this. still lovable little blighters though

[@sillysod998]

the guy who sold it to you should of cleaned it and been up front about the heads low points, with pics, careful what you buy chap

[@mattus1gig]

BorisTheBlade that’s exactly why they don’t clean stuff from a beakers yard.

[@theEskalaator]

But it was cheap, mate...

[@SoundOfYourDestiny]

"Should of?"

[@amphetamineblue4172]

You may find skimming isn't going to remove those pits as some look pretty deep. Skimming is really for flattening a warped head, not taking out pits, and there is a limit to how much you can skim off

[@robthesamplist]

Exactly my thinking, hope he gets away with it. Got a feeling he will but it will be prone to going again in within another 10k

[@amphetamineblue4172]

@@F0rdy57 Seems like he would have been as well getting the water channel in the original head welded, then have the head skimmed rather than swapping for another one with problems. I work on motorcycle engines, and we never see pitting or corrosion like on this head, must be very low quality metal :(

[@johnnorth9355]

I am starting to understand why I see so many older Minis advertised for sale with head gasket issues. It looks like the aluminium head casting are not of the best quality as castings and are not QC'd as perfect in the assembly process meaning that as long as they will work for a while they are judged good enough. This is a real shame as the design is good from a serviceability point of view. Great to see the in's and out's of the strip down - good work.

[@MePeterNicholls]

John North South American Chrysler

[@xmoroseguyx]

It`s not German BMW As often claimed as it`s made in the UK and Holland, The gearbox is Peugeot I heard, And the engine is from Chrysler, The whole car is crap quality

[@mkm7962]

Reminds me of the rover 25, same issue.

[@lukey3507]

@@xmoroseguyx Only fools buy BMW's poverty market Mini's they used a new name to cheap out on. Their gearboxes are terrible, the engines are terrible as noted in other comments. The head supplied to SG was most likely off a Mini with a HG issue. They don't pull good engines apart.

[@xmoroseguyx]

@@lukey3507 Yes, That`s a good point about the cylinder head, When I went in one it had a rough bouncy ride, Those large front frameless windows can catch you in the face, And this one now at over eighty thousand miles the timing chain will need changing

[@rumanda36]

We always had access to a couple of machine shop’s (friends) and several speed shops to rely on. You’re absolutely right to deal with the issues now, and you’ll be happier in the end. Part of the fun imho, and we learn a ton along the way. Great honest vid, enjoying your little epic here.

[@irgendwieanders1]

Confidence - buying a new set of tyres before the motor is running :D

[@MateusBald]

*And an aftermarket exhaust

[@blind3pot266]

Forreal

[@tigermoth3194]

Nice one, James. I love your enthusiasm to get stuck in and learn as you go. Well done, matey.

[@Peterpanic-c3h]

Now I understand why there are so many Minis for eBay for Spares or Repairs. Gearbox failure, head gasket failure (as we know most likely the head is pitted and the water jackets eroded)or "misfiring". I suspect the misfiring is due to water in the cylinders. I would have weighed it in personally, definitely would not have bought tyres for it so early on!

[@i-do-stuff-2]

I want to thank you, just did a small service on my Corsa, I never had the confidence to work on cars, probably coz of my dad, but because of your videos it gave me confidence, oh by the way im 58 years old lol.

[@finhouston7500]

Good job matey saves loads of money nice to see other people servicing and maintaining their vehicles should be proud you done it and i hope you continue to service it yourself if in doubt use cable ties

[@colwyn9]

Nice scrape on the exhaust valve on cyl4, you also whacked cyl1 inlet valve a couple of times with the scraper

[@enlightenednews5265]

Well we can't be all perfect. As your mum tells you.

[@garyphillips7993]

Collets, those little parts that hold the valve springs in place. I'd let the engineer works grind the valve seats as well, make it easier to lap the valves back in. Wouldn't surprise me if they don't end up doing some welding on that head to build up the low spots before a skim.

[@donarcher7002]

Spring Compressor is for putting the valves back in. If you want to save yourself a heap of time removing the valves get a deep socket stuff a bit of rag up inside (leave plenty of space for the collets to jump into) stick a pad of rag in the combustion chamber. Place the head flat on the bench and give the socket placed on top of the valve cap a few smacks with a hammer (you have an old spare head to practice on). Everything will separate, collets will jump out and cap and spring pop up. It is really quick. Cleaning carbon from valves is quick in a drill press, tape the top of the stem and stick them in the chuck (hand tighten only) Use a blade or scraper first if they are really dirty then emery cloth. Only clean the dirty part do not clean the part above which goes into the Valve guide, also go easy on the valve seats if you are only going to lap them in and not regrind them.

[@bobunderwater5320]

Keep the old cylinder head in the boot....... Then when you weigh it in you'll get more cash 😎😂

[@nov3019892008]

Thats the best thing for any mini

[@Aidan-LM02]

😂😂😂

[@lukey3507]

@@nov3019892008 Yes, think expensive BMW then think cheap as possible production & cheap sale price when new.

[@Akumarb26]

Add a couple of breeze blocks as well

[@stuart121972]

I was going to suggest trying to get a video at the engineering place of the head being skimmed but you are one step ahead of me 👍🏻. Hopefully they’ll let you film as it will be a bit of free publicity for them.

[@Matt-ft2fc]

Fair play to you for doing this 👍 not for the faint hearted

[@paultaylor9652]

Lovely Jubbly, thanks for another great informative video matey, hope all goes well with the skimming of the head.

[@NickHudson2]

Great video James enjoyed this one with a cup of tea 👍 Secretly pleased you ended up having to strip the head though it's quite inspiring watching you getting stuck in, Will be placing a hoody order soon😎

[@dpmowembo9035]

Great video. I have a mini one and I'd love to rebuild the engine and your video has taught me so really good information I didn't know before keep up the good videos. Buy a mini cooper s next :D

[@markshepherd8413]

Cool video's..gotta customer she's has an R50. Drives it like a getaway car..but the pressure test shows the head gasket is ok...it's hot as hell down hear in S E texas so it's always puking on the ground ..these cars aren't built for a 107° ambient so at 96k miles i know a head gasket is coming soon..your video's are going to come in handy..tnks bro.

[@LukeMechanic]

The metal pieces in the valve springs are called collets by the way

[@musawenkosividima6209]

Great video once again James, really appreciate the content and patience you have when working on your cars. I have learnt a lot from you, shout to you man all the way from South Africa.

[@mkm7962]

Good vid mate. Can't wait to see the progress on the engine. I kinda knew you would have trouble getting the spark plug tubes out as I used to fit them at work in the engine shop. We used an air hammer and they went in about a half inch with red thread lock on them to ensure they wouldn't vibrate out at high rpm. Would recommend thread lock on reinstall if they take them out, also the two grub screws you took out as these would cause havoc to your top end if they came out. Of course you could just tell me to shut up and stop being a fanny lol. Thumbs up....

[@tonymccarthy9273]

Hi mate I like your videos , hope they sort your mini cylinder head , look forward to the refit vid , cheers mate ,from Tony from bedfordshire 👍👍

[@patrolturbodiesel]

Big cam, port and polish while it's apart

[@jusb1066]

Brave to do all this, more energy than me at your age, the couple of head jobs I ever did were enough

[@fedup2811]

James love watching your videos makes me want to work on cars myself.

[@bobbywuk]

What are those cut outs at the top of the inlet ports, they seem to be inline with the spark plug tubes. Are there any screws in there holding the tubes in, worth a check maybe.

[@adamharrison4168]

Might be a novice question but how do you make sure the new head is set the same as the old one to make sure the timing is right?

[@djhatstand7312]

You set everything to TDC or top dead centre before you remove the old head, on the new head you line up the timing marks, place new head on block and everything is set to TDC

[@jamespn]

I really dig the large hatchback saloons you have in the U.K.

[@coses4957]

I wouldn't have been so confident to get new tyres before repairing the rest ;).

[@letsplayer5098]

those little metal bits holding the spring in place are called collets. for future reference

[@djhatstand7312]

Little magnet or magnetic screwdriver to remove the collets, dab of grease on the end of a screwdriver to refit them

[@terryatkinson899]

Practice taking off the spark plug tubes on the old head. I'd put a suitable sized socket inside the tube and grab the outside with a stilson. It'll either kill it or cure it.... put the tubes in the freezer when reinstalling them.

[@NikEastwood161]

Good video, i work on rover k series heads and love it, they dont all need skimming theres a few that i think failed because the bolts were not tight enough - and they had all been done previously.

[@simon2knine]

Best to have the head skimmed...Little metal things are called collets .

[@CarlMCL]

The mini series has been probably the most interesting series of 2019.

[@Clicksystems]

Definitely, complete strip down Haynes style would be great.

[@simonevans9145]

watching you has inspired me to start fixing my car instead of just taking it to the garage 😁

[@paulbingham8921]

the little retaining clips on the valves are called collets

[@gavinotavera9492]

As far as you know, with the cylinder head installed is it possible to take off only one rocker arm to change lifters, without taking off anything else?

[@mattsilver8519]

that was quality james really enjoyed the video 👌👍

[@chrispreston1730]

Have you got a link to the scotch brite pad and attachment for the angle grinder please? Great content btw 👍

[@tamannachoudhury1504]

Finally after all that work it’s completed

[@inchaseable1]

Good video my young James,great content

[@probnr]

Hi, which grain typ is the brillo pad? 280 or softer (higher)?

[@Mr_tater_the_real_tater_king]

Is it cast iron I’ve been doing some research to see if I can put some cast iron heads on my mini I don’t know if that’s even a thing but idk

[@nagaratnamsaseenthiran5275]

My one head gasket gone I need the timing china tools for 2003 Mini Cooper s 1.6 petrol 6 gear manual. Can you help me to find the timing china tool for me

[@ChazzCoombes]

Been waiting for this James

[@D5DRIFT]

Surely those water jackets need to be built back up? That cylinder looked very bad if you ask me

[@drinternatg6391]

The pieces on the top,of the valves are called collets I think

[@jamesyoung5349]

Love your videos mate always looking forward to the next video goodluck!

[@christopherjohnson6056]

They are called vale spring collets.

[@TomsDriveway]

Looking a little messed up in the same place, must be a common defect area on the heads.

[@c111prs]

Collets I think those bits on top of the valves are called :)

[@lukey3507]

You should do a end price of what each project costs you at the end. Like Wheeler Dealers, a price run at the end of each project.

[@rb6491]

been watching this guy's vids on the mini and I think they're very good. Does he really need all the negative know it all comments that some are giving? So many experts lol.

[@TheSavageGarage]

Thankyou!

[@sicks6six]

collets, alloy heads use a credit card as a scraper with brake cleaner, just a thought,

[@qdawg4033]

Nobody using a socket and a hammer to remove valve springs these days??

[@seifessaadi2007]

I do that 🤣🤣

[@GBR4ME]

Love the flag in the corner, nice one.!!

[@billiardball9650]

james seen a set of wheels ie new tyres all dressed in aerospace 303 tread and all 80k miles on them and still many more k miles left on them im due new tyres mine will be getting it just a thought you might want to try

[@stewartcampbell5990]

"Little pieces of metal" are collets

[@MePeterNicholls]

Have these engines been using neat coolant?!?

[@adamspencer95]

'scotchbrite is soft and won't remove any metal' just be careful, some of the more coarse scotchbrite uses aluminium oxide which is harder than the cast iron so could easily remove metal

[@muhammadsalmanasghar9431]

Hey man. Nice job and channel. What do you recommend someone to Study for automotive engineering. Big thumbs up

[@garageworm17]

Arp head studs is the best upgrade you can do it's cheap insurance

[@BBS_Robski]

save those eyeballs ! fook the feet though if the head drops on the white trainers 😕

[@johnblackburn7673]

Lol

[@daningram7309]

Loving this project

[@mondodaftasabrush]

Suprised you don't need to buy a notched gasket to whatever is machined off to compensate and valve stems At least you have some spare spark plug stems. Maybe you need a hot air gun just to crack them free

[@gabrielmirtz8791]

the bits that hold the valves are called cotters

[@gwengo4167]

Great vid, always wanted to do something like this, but don’t have the time, room or spare car

[@anthonykenny1120]

Great video,, how do you get them spark plug tubes out ??

[@andrewagroment6813]

So why didn't you just get the original head skimmed? Would of been far quicker and cheaper. Rather then buying another head and getting that one skimmed seems crazy

[@gwl78]

The water jacket was damaged.

[@aaronhajzyk]

That’s what I was thinking but the water jacket only needed alloy welding and then the head skimmed

[@JamesAllen300]

@@aaronhajzyk Would you trust an alloy wheel that had been welded? No, neither would I!!!!

[@theboiwhohasnoname]

@@JamesAllen300 why not???

[@superseven220]

@@JamesAllen300 fine if it's done properly with tig and by a welder who knows what he's doing

[@dioramasscalemodeling]

Love your videos, would love for you get an r53 supercharged mini

[@zoidberg444]

I would imagine the spark plug tubes are an interference fit mate. Probably pressed in at the factory with some sort of a hydraulic press with a tool that expands the end of the tube to lock it in there. Knowing its BMW i would imagine it might be "special tool" job to extract and refit them. These BMW heads really seem like trouble. Maybe they haven't had the best of luck with coolant (or the BMW coolant is shit) or there was some porosity in the castings the galvanic action made short work of it. Really enjoying this series mate. Is the Yaris on your drive for the Mrs? haha

[@DriverExtraordinaire-qn6gt]

zoidberg444 isnt it a Rover k series engine ? I know mini is owned by bmw now but I don’t think they’re used bmw engines back then

[@gandi69]

Mar Cin no this isn’t a k series, although rover would have wanted it in there if they had got their way. It’s a Brazilian built BMW/Chrysler unit.

[@luanast2]

Good stuff really enjoyed the content, can't wait for the next one

[@andyplimbley630]

There colletts that hold vavle springs in Jamie

[@zfiddy]

Head looks rough just like your original one? Some of those ports need welding too by the looks of it.

[@anthonywhite721]

That head looks fine to me

[@jimmyjimbos2215]

Great vids James keep up the good work 👍

[@michelr.4592]

Was ur old head warped? I think ur old head looked a bit better. Just had to change the clutch on my mini but I fear ima have to change the whole thing :(.

[@hardworker8030]

You should check how flat the head is with the tools you have always used then when you take the head to the engineering place get them to measure it to see the difference.

[@BillyNoMates1974]

would be good to see how they mill a head. A fly cutter would do the job but probably not precise enough to mill it

[@adamthompson9613]

Thats exactly what we use at work, does the job perfectly.

[@BillyNoMates1974]

@@adamthompson9613 I used one once. I asked what I could take off a bit of metal. they said 13mm. .... so i did. the bloody bed was shaking. ha ha

[@theboiwhohasnoname]

Fly cutter would be fine

[@adamthompson9613]

@@BillyNoMates1974 jesus bet the bloody thing was shaking it tits off 😂

[@tentotwo8290]

Will skimming the head increase the compression ratio?

[@gavjlewis]

Yes. He will need to get a new head gasket as the one in the pack will be for a factory head. He should get a report back with his skimmed head with how much was skimmed off so he can buy the correct gasket thickness. If it was me I would have returned the one he bought after cleaning it up. That money would have been better spent welding and skimming the original one.

[@tentotwo8290]

Thanks, I've always wondered about this when a head is skimmed 👍😉😉

[@Aidan-LM02]

I’ve got them safety glasses there no cry

[@peter12266]

What is the price for a new one ?

[@everythingcarsishere5110]

Buy a lot of my stuff from the mini guy, he’s a top bloke and competitive prices too

[@johncrawford6782]

Great job pal getting ready to do the head gasket on my 2l d4d Diesel engine 07 Toyota avensis any advice

[@blackghost769]

One of your loyal fans keep up the good work🖒😉🖒🖒🖒🚘⛽🛣

[@paulandsarahcaravanlife]

Great video mate. Not all jobs go to plan. 😎👍

[@wornoutgrafter9581]

I suspect incorrect factory recommended coolant is being used in these mini engines at coolant change intervals , some of the cheap universal coolant may look right colour but not sure on there chemical properties , maybe this is why heads are becoming porous , surely a Bmw owned company has good quality control on aluminium casting .

[@stevewoodw]

Can you get the other one machined flat at the same time and sell it on for a better price?

[@JamesAllen300]

The original head is junk.

[@robertpowell7672]

What is it about new tyres?

[@LukeMechanic]

Robert Powell what?

[@Kingdonnerkebab]

Me too, Its the best thing in the world.

[@robertpowell7672]

@@LukeMechanic I love new tyres. Do You?

[@LukeMechanic]

Robert Powell oh I thought you was asking why he got new ones 😂

[@robertpowell7672]

@@Kingdonnerkebab Thank god I'm not the only one. I thought I was weird.

[@Ricky12389]

Collets is the name you were looking for

[@stephenprice3199]

Try to use a breaker bar not a ratchet you're kill your ratchet quite quickly check wear on your rockers strip the rockers down strip the shafts down clear the smudge out the middle on both of them check the wear on your cam check the gear on the end and choose the best from the other one that you have good luck

[@J4C08G4M3R]

I own a ford focus titanium 2007 and need a new thermostat and housing which one do I need can anyone help????

[@Toby_the_Glen]

Depends what engine you have? Hopefully it's not a VCT because they are fancy electronic ones.

[@J4C08G4M3R]

@@Toby_the_Glen it's a Ford focus titanium t 1.6 57 plate

[@J4C08G4M3R]

@@Toby_the_Glen found it lol and it's and expensive one for Ford Focus 1.6 TI 115HP -07

[@loganallies7117]

Make the Astra AWD please

[@Jacob_Field]

Logan Allies doubt he’d do all that work on a bog standard mk4

[@alancooper7062]

They are called collets !

[@kiwitrains]

The seller should have cleaned it as said before

[@johncooperworks7404]

warum die bananes ist krume???

[@FeverishFerret]

Enjoying the Mini vids