New DVD series GD&T

New DVD series from James D. Meadows, ASME Certified Sr. Level GDTP and a full-time Geometric Dimensioning and Tolerancing (GD&T) Trainer and Consultant since 1982. Visit www.geotolmeado... for more information.

[@burnzmadafvcker8028]

You're a monster sir. Thumbs up

[@aKaCrowley]

sir, you are a light

[@mauriciocastro6363]

For Step 4, wouldn't be better to put a composite tolerance controlling the pattern position and the posiiton between the holes?

[@aguskusnayat]

Thanks very much sir.

[@alexcalibasi7028]

check my phone hold my beer

[@johnmchugh8088]

Datum B could be the Key slot...establish a centerplane then clock the holes...done

[@dvhsnake]

And how would that control all six degrees of freedom?

[@fredieeevlogs7077]

The professor is a really good explainer, I'm wondering if you can recommend me a book with useful explained examples like this Regards!!

[@AnandSingh1]

Fredieee Vlogs Actually he is the most famous GD&T trainer. You can find his books and other material on ASME website. I am wondering how this video ended up here.

[@prataprahulyadavx]

+Anand Singh WHERE FROM I CAN FIND HIS BOOK, SUGGEST ME

[@sivaramansabari4935]

but amazon shows lot of books...which is the best one that can i choose..?

[@cdwalk]

I need to learn more about GD&T. Actually everything about PPAP and APQP

[@lileon7676]

+Christopher Davon me too.

[@babasahebpatil8262]

Explain More about GD and T

[@QwertyCanada]

@@babasahebpatil8262 it's a book

[@maheshkoheda9194]

Thanks james! that really was a great explanation.

[@Varun-uv4li]

Mahesh Koheda : Bhai mujey gd&t ko janana h pr mujey kuch nhai atta ...... please, bhai koi book ya lecture suggest kro jiss-sey mey kuch learn kr sa khoo .....

[@syedsohail2426]

​@@Varun-uv4li For those interested kzbin.info/aero/PL1IHA35xY5H7HomHQY9nDwifWYvH_Aa1n A Comprehensive Lecture Series on GD&T I must say

[@arjunmohod6886]

​@@Varun-uv4libro kuchh material ya lecture mila kya aapko mujhe bhi suggest kro plz

[@Enoch8283]

Good teacher but i got lost somewhere

[@rx0788]

I didn't get the result of the distance the hole can rotate, can someone help?

[@tommywiseguy]

Please don't encourage the use of MMC on threaded features, especially if we know that inspectors are probably going to use the minor/major diameter. :-)

[@abhishekdeshmukh4657]

Can anyone provide a free pdf link to the book please? I want to learn about gd and t but can buy the book because of monetary limit

[@sagarpatil9881]

I have gd and t stuff if u want then mail me..i will send u... [e-mail]

[@ginotacobell3098]

Yes, I like this instructor. He sounds like one of my old professors back in my college classes... But I still don't get why he said we may not need |C| datum feature for those 4x holes? Let's assume that the ID with keyway slot and OD and both side surface at machined 1st then now how to setup the part to make those 4 holes? How much off from the hole@12:00 to |C|? But I pet the part will be turned, OD, ID and thickness first then put on Mill to make those 4 holes. Then now the keyway slot will be made. The same question, How much off from the hole@12:00 to |C|? To me, if you put the |C| there at TP of 4 holes, all (machinist, inspector) will know that the holes have to be controlled by |C|. Just my thought!

[@brianpdesouza]

Ef h🍞cffyfg j7i.

[@brianpdesouza]

Jjrjjrjrjudududiffidjdiffifidifjfufj Jfjfjdjfjfjjf.

[@brianpdesouza]

Fghhghjhhhhhhhuhuj

[@brianpdesouza]

Ggghhhhuuuuiii

[@brianpdesouza]

Rgyhuhhg1TGG2TGY3GHY4GH5Aidan6hhjjhhbhjhhh7hhbj8jjjjjjj9jjjnjjjj01jjjjjjjnjh 11gghgggh.

[@geraldgray1500]

so so difficult to understand

[@moviesndme6108]

will you please tell the book name ur using..

[@tanurajbhattacharjee]

this will be very useful for all

[@TurgayUrla]

what an expensive lock, Ustalık ve sanat.

[@johnmchugh8088]

page 69 HEH HEH HEH

[@reznet2]

I don't understand any of this lol