NEW EXHAUST FAN... 🥶

[@spacegoats2194]

Your welcome, we know who's idea it was for the 18" fan. You also need some more fresh air intake. You need about 3 times the size of the 18" fan on max speed. So you need a opening about 1.5'x4.5'

[@RedPandaMining]

Im officially DONE with exhaust/fans now its working lol

[@RedPandaMining]

Damn it spacegoats

[@spacegoats2194]

You know your not done. Your just getting started.

[@epiclootsmining159]

Thats over 1600 sq in, which is larger enough to run 10k cfm at 1150fpm! You need a louver, and depending on the louver size it will have a different "free space" that will determine the size you need to that amount of air at a particular cfm. If you add in filtration...which you should... you need to consider the static pressure increase required to pull X amount of air through your filters (depends on the filter type). Since your only fan is exhaust, it will have to overcome the static increase....unfortunately axial wall mount fans aren't the best with static pressure. Filtered intake fan at equal cfm with metal mesh (washable) filters is the best solution here. (Except for the power it uses) Experience: Commercial ventilation expert for 20 years.

[@grenwolde]

@@RedPandaMining never done

[@tonygradisa1280]

Think how to use this energy like warming water for house instead to throw energy in waist.

[@wreckless_-jl6uu]

you really really should get a 5 or 10 ton hvac unit and have all the ducting ran to your mining room and you would have any heating/cooling problems

[@RedPandaMining]

I dont have that kind of money or infrastructure in a residential house lol

[@TheComputerCommunity]

What are those shelf's called ? They look like hard plastic ?

[@LemontTheFanMan]

cool exhaust fan i like it its powerful you did a good job. Is it still running today ? and i like your Studio Setup also

[@dEagz13]

If you enclose the area between the fan and the rigs with 4x8 foam board pieces your exhaust fan will work twice as well. Basically just put the foam board to the front post of the rack to turn it into a giant exhaust hood. Right now it's drawing air from the path of least resistance which is the entire room.. isolating that corner will help you substantially and foam board is easily movable. I only have four 8 gpu rigs but I ducted that same 8 inch inline fan outside with a collar through the foam board on the hot end. Tough to explain through text but basically the rigs are setup in a small square space with a divider 3/4 through the middle and open on the basement end. The rigs are lined up so the fresh air passes right by them all. Works like a charm. Even the 4th one on the hot end never sees gpu temps above 64C.

[@myrongoed7633]

why don't you use both fans of like change the window so you can do to or more fans.

[@TravisGondo]

How loud is that? I need something like that for my condo but in the range of 4500cfm

[@SavageBits]

Depressurizing a house with an 24-7 exhaust fan does carry the risk of creating Carbon Monoxide back drafts. This is when the combustion gas from a gas water heat is sucked back into the house by the negative pressure. Just something to be aware of if you have gas appliances.

[@lucashmz]

Hey Red Panda, I mine since 2018 and I don't miss one single video of yours. If I could give you a tip, you should block from the top of your shelf to the ceiling (you can use styrofoam sheets), that way you will create a hot aisle containment and the air won't recirculate and mix with your fresh air. Think about it.

[@Justriding]

The fans on your rigs, do you have them blowing into your GPU exhaust outlets? I have mine set up like this.. just wondered if this is optimum? Thanks.

[@musictamaulipas6319]

yes it is, very interesting, today i flipped it as an extractor and my rig overheated

[@vegetapt9144]

looks great but you should definitely put some interior frame bolted to the window frame and the fan for reinforcement cuz like this is an invitation for curious criminals :O it doesn't matter if no one knows what's inside or how safe your neighborhood is...here in Portugal we have an old saying that translated would sound something like: "the opportunity is what makes the thief a thief"

[@MiningChamber]

That fitting is actually satisfying O_O

[@RedPandaMining]

You're satisfying

[@JakeStPeter]

VERY!!!!

[@LM-wz1tj]

You know that need it to stop the fan after 8hs ? Because the bearing crash ..

[@christheownerofvacuumsands9104]

What's the name of the shopping fan

[@littlehorn941]

That fan fit so well... so satisfying to watch it just work.

[@SirLaurenceII]

I was one of those who suggested that you get an exhaust fan, even with a photo of the one that I was using. I am glad I was able to help in some ways. I would suggest that you add at least two more to make sure that all heat are sucked out from your crypto mining basement.

[@tjahangon7286]

Was the air blown in or out?

[@robertglenn9993]

Use weather stripping instead of duct tape. No clean up if residue is left behind and easier. Just tape the mounting holes on the fan.

[@A51Jeremy]

please look into a server room design sperate the hot and cold site of the racking this cap be done cheapy with tarp !! you will get a much better cooling rate not allowing the mixture of hot and cold air from both sides of the racking and also the exhaust will be ALOT more efficent in extracing the hot air, as bu seperating the cold/hot side you have much more control over temps

[@crptdyth]

I need to get a fan like that, but I need a 12 inch x12 inch for my opening in my laundry room. I have one of those fans on my homemade generator box. Works great so I can run it closed off when I lose power.

[@leozolt]

If you plan on keeping the mining op, you could consider using a air to water heat-pump with a big buffer to heat water and heat the house. In summer it's not that beneficial because you need much less warm water but you can always extract too much heat to the outside with fans.

[@davebodger2]

Another idea is to put solar film on the outside of the windows that get sun, it will help lower the peak heat load into the room. Also paint any exposed outside wall on the South side white, if it isn't already. Every little helps. :-)

[@scotte1153]

Just finished building the first new rig I’ve built since 2017/2018... 13 card AsRock 5700 Challenger D (non-XT). Flashed to XT and added 1500 straps mod. 56.5-57Mh per card. 120-127W per card. About 1700 total watts and 740~ MH :)... had to use 4 power supplies hahha.

[@noobwow2009]

LMAO. I feel like I am watching someone setting Meth Lab.

[@MatHelm]

Pro Tip: You can remove the fan from the shutters (via 4 bolts) and add aluminum bug screen between the fan and shutters, because as you'll find out if it's not running 24/7, it is not bug tight.

[@geoffrobdavis]

Are those bit coins?.

[@zachkey7586]

I can’t find much information online so thought I would ask on here - how many of the same type of gpu (rtx 2060 super) does nvidia drivers support? Windows used to only support 8 but I hear now it is 50. Limitation are the drivers now so what is that maximum number of gpus per system? Thanks in advance.

[@brooklynanderson4434]

What’s the decibels of the fan outside? I’m building a shed for my ASICS but want to keep noise down as much as possible as in residential area. Hope to hear back from you. Thanks for the videos!

[@RedPandaMining]

Really quiet

[@Victor-nn2wi]

You should use an window ac

[@rhylpancakesph]

9:03 hmmm maybe the most expensive door stopper :D

[@Kenman540]

Congrats! I might suggest you put some sort of strain relief on the AC cord on the fan.

[@schafercunningham]

That fan makes the setup cooler

[@chavapoltatiyapongpinij3413]

I'm kinda building something similar here, just wonder that, how you manage when it rain?

[@saradauchiha5289]

Hi im a huge fan of mining and your channel ! I was wondering if you could show me the ropes of starting my business in mining ? lets say i startup with a 12 gpu (300-700$) each how much money per month would i generate ? By the way im paying 0.5 cents kilowatt i think. Im planning to do a rig at my parents house. Ill pay for the gpu using my dividends ( i currently get 1000$ a month). I think i project to have at least 80 gpu or 100 when my project is done

[@pavelboguslavsky9703]

hi panda , if the mount for monitors dont work use your excess power supplies or books (for support)

[@mr.swiper6338]

How do you switch between rigs with your monitor ?

[@RedPandaMining]

In windows using RDP

[@joeysupra311]

have you switched from nicehash on your Z15? I am still using them and thinking about switching .

[@mulljacob]

Congrats on getting an exhaust fan in that hot room! Your cards are thanking you right now.

[@manyakgaming1346]

Do you know why eth profits are so down?

[@nightking6309]

Am new to mining what do you recommend shall i start with nvidia or amd ??? many saying algorithms for AMD is less and to go for nvidia

[@RedPandaMining]

Nvidia if you are beginning

[@cryptomininglifer5977]

Awesome !!!! Been kicking around the same idea, instead of just using a standard box fan. My mining room is like 100f !! Just hate spending on the extras... LOL Would rather buy GPU's LOL !!!!!

[@PicasaFix]

cool that exhaust fan really good , is cool down a lot because is bigger and lot more airflow too , i like have 2 for my asic miner :D

[@PicasaFix]

if you have a smaller window you can use this too :D , really helpfull

[@PicasaFix]

attention : this is not scam or advertise

[@cryptogiiirl4011]

that was a good choice, also you never tried just using your z15 as output fan :P

[@RedPandaMining]

Lmao

[@RedPandaMining]

Someone will steal it outta the window 😂

[@cryptogiiirl4011]

@@RedPandaMining LoL, if i want to i would fit through that window my friend, only us citizens could not, but you are in canada as far as i know :P

[@0verk11L]

Red Panda Mining next video be like my fan got stolen 😳😱

[@RedPandaMining]

@@0verk11L LOL right?

[@TrendingVideosmohtasep]

Is there any way to get donations to start build my own mining rig ? Am so excited to get involved in this world but there is alot of challenge stop me start so i need push , comment down below if you are interesting to help , any thing you wanna donate its will make huge change (old gpus , mother board, power supply, cash ) comment below if you interesting

[@antoniuss6967]

Hey Red Panda, when will BTCUSD 14000? Is it now the highest?

[@RedPandaMining]

not financial advice but we are still in a uptrend so i believe so yes lol

[@antoniuss6967]

Red Panda Mining thank u so much

[@rpreto72]

only one remark RP, why didn't you install the exaust fan on the left side of the window insteadof the right side. that would have put the exaust right at the upper most corner of the room, where hot air might get trapped :) anyway, I think overall the upgrade was significant. I wonder how much you can drop. Keep it up RP

[@RedPandaMining]

The window only opens up right side :(

[@rpreto72]

@@RedPandaMining ahhh ok. keep a watch on that corner though (if you have the time) you might have some turbulence there but not enough to shake the warm air out of there.

[@txtpeer5179]

Plz put some cable loom an tape over the wires for safety

[@Kent535535]

I bought this model as well as the next tier up (double the cfm) and let me tell you the next model up pulls so much air!

[@RedPandaMining]

I was about 1.5" away from getting the 20"... I wish i was able to fit that one

[@Kent535535]

@@RedPandaMining oh i meant in the size you got (the 18inch) they have 2 different models. One uses .85 amps and the other 3.5 amps. The 3.5 amps pulls double the cfm.

[@RedPandaMining]

@@Kent535535 WHAT I NEED THAT THEN, how come i dont see this 3amp one hmm can you link me sir

[@Kent535535]

@@RedPandaMining ill message you on discord so its not cluttered on here?

[@hood3439]

But can it run crysis?

[@sapper3944]

Nice Fit! Enjoy the breeze!

[@zablockikj]

TWO... you have room for another one. Put a second fan in that window and your temps will be even better. Also if you haven't thought about it... you should build a hot room / cold room design. You need to close off your rigs in an isolated room with a lot of exhaust fans to pull out the hot air. You are still pulling out air from the rest of the room. You need to focus on the hot air from the rigs. This is a much better solution than the in-line fan though.

[@manfar1234]

Do you use NiceHash?

[@Crusadex1995]

Wow the fan looks like it helped alot! That’s great!

[@DarkObelusGaming]

the 6F reduction is so satisfying.

[@RedPandaMining]

it's a lot more haha, like 20f now, the next day once it cooled down and the ambient in the place went down after awhile. Same like heat outside but now way better temps inside.

[@scotte1153]

Get one more fan and put it in the studio window for intake :-)

[@Savage_Viking]

Forget the Mh/s, how many decibels are you running. New measure of success. Looks great! Envious as always.

[@mrourcanada8964]

That’s awesome everything is cooler you’ll sleep better at night knowing your rigs I’m going to melt down now

[@danielortiz9781]

Thanks friend. I will buy the fan for my crypto farm.

[@0verk11L]

Great Idea Buying that fan.

[@fheyo]

Here is what i am going to do. I will keep my mining rooms doors closed and count the time it takes for rigs to be very hot. That will be the time i need to replace air in the room. For example, time for the rigs getting hot : 6 minutes. room dimensions : 3mx3mx3m = 27 M3 so i need a fan 270m3/h. i have a neighbour upstairs so i want to install smallest quitest fan possible. What do you guys think? Does that make sense? I have only 19 cards , i dont think i will need that big of a card in the video

[@AleksandrsBrodie]

hmmm might need one. classic outro was the best

[@khalidhesham6959]

Very nice room and fan congrats

[@HEREJIA...]

wow, your video is very epic, I have a fan in the window of my room where I sleep and even the window gets super cool the room

[@cc-.-]

Is that it? Are those good splitters shown in the beginning of the video? 👍🏻

[@sysadmin4eg275]

Hi Panda. I have 2 450cm collers like yours. They make 9000m3 in a hour in max power by 2. My rigs are frozen. Summer temps 50-60 cels. 2.4gh power on eth. 11 rigs. 71 card. 9800w power consum at 220v. Make them to FROZE!!!!

[@CryptoMykel]

Fantastic Job my man!

[@Onekrs26]

👍best of luck

[@mesutahmedi562]

this is exactly what i told. u did a good job taking care of sunlight geting through windows. and a big fan. that was a good job done. i suggest if u are interested in better cooling and less dustie basement.get another fan just like this one and use some air filters for your wondow in your studio.

[@bitcoinKZ]

rx588- 56$

[@mikejohns3104]

I love it. Nicely done!

[@paulrucci523]

Way better top job, put a second one in next to it lol

[@sinnersconquest9311]

at the end the temperature meter said 96 F

[@bobleonard99]

Now thieves know exactly how to breaking in 2 minutes or less.

[@venombeastgaming7571]

Wow finally this video came... I m waiting for so long to complete the whole setup of red panda... And i know that red panda will also do that soon...BTW 1st comment

[@orlyitah4200]

fit so perfectly :O :O

[@RedPandaMining]

Lmao Orly

[@orlyitah4200]

@@RedPandaMining ; ) hehe

[@BYRONSLAM09]

gg radeons vii, awaiting the big navi release💪💪

[@mynameiszoro]

Nice video panda

[@pragma93]

mining with 3x RX5700XT on a rig, worked fine for almost 3 months now. Since about 2 weeks now, 1 GPU goes off in the MiningSoftware (Nanominer). Sometimes Win10 crashed and the comment is "AMDKMDAG.sys". Tried losts of stuff, but nth really helps. Anyone having similar troubles with the RX5700XT or Win10/Nanominer? Greez

[@nikolakarovic5964]

U need at least 1 more fan

[@banviorel2435]

Had that thing done 2 years ago

[@RedPandaMining]

WELL LOOK WHOS BETTER

[@mynameiszoro]

Whoever is reading this, this has nothing to do with the video but i just wanted to say that i bought a mining starter kit which includes a Motherboard and a ram and cpu from nerdgearz, and it came pretty beaten up, full of dust, and dead on arrival. Sent them many emails and it's been days no reply. I will not buy from them again and from any website that has no reviews or a place for them.

[@RedPandaMining]

I just asked NerdGearz and they said they have not gotten any email regarding a beaten up starter kit. Please advise.

[@RedPandaMining]

also please pass me your email address used on nerdgearz so they can confirm.

[@boxfan6656]

The game will change when it gets colder outside. Real soon.

[@boxfan6656]

I'm using 3 x 24" 1920 x 1600 monitors. They are called "frameless", but they really aren't. They have bezels thinner than traditional monitor bezels by 50x, but there's slight black bars on either side - larger than the think bezel. The actual unused area on either side of each monitor is larger than the same area on my phone. Frameless to me, is just market hype, I'm waiting for truly edgeless monitors.

[@RedPandaMining]

Yeah ill have to turn it off in winter hahah negative temps

[@VIPCarlM]

19.1K already!!!

[@RedPandaMining]

😣😣😣😔😔😌😞😏🤫

[@ArabPeaaaa]

same with me

[@TechManTY.]

That thing really sucks 😅

[@davecruz3000]

I rather put it direct to gpu

[@cryptokarnage6394]

morning big red. everyone.

[@cryptokarnage6394]

it was hot yesterday BUT i heard 34C Today !! get prepared its gonna be a scorcher