New favorite tool

[@manelson647]

Living “The Good Life” in Nebraska, and documenting your days, nights, sunrises, sunsets, and your family values ⭐️❤️😀

[@robertbcope]

"I bought it so that my neighbors could use it when they need it" speaks volumes about you as a person, I think.

[@davidkimmel4216]

Thank you. Merry Christmas to You And Your Family. God Bless

[@oysterfleet5669]

With all those Milwaukee batteries, a portable Milwaukee Power Inverter might come in handy. Merry Christmas.

[@NoMorePain1Deep]

Love the Christmas tree 🎄 that star is as bright as the star of Bethlehem.

[@mterminelli]

Merry Christmas to you and your Family from the Terminelli Family

[@johnpotts8719]

Merry Christmas to Cale and the family. The one that looks like a tabby should be named Zephyr

[@MrRickieblue]

Well Cale...one of your readers commented about you driveshaft being out of line and he is correct. The interaxle driveshaft is assembled wrong. Please do a search on understanding driveshaft phasing and there are a couple videos that will demonstrate the effects of misphased driveshafts. Also..all 4 wheels drive with the same amount of torque applied to all 4 corners. If any set of duals is on ice they alone will spin until the ABS Traction Control applies brakes to that wheel so that torque can go elsewhere. If you lock the axles together and there is one set of wheels on the rear and one set on the front on ice, it will again spin those wheels. For all the non believers, jack up any one corner on your truck and see what happens..go slow because the ABS Traction Control will activate and it will pull the truck off the jack. No one understands what the interaxle differential does in the front drive axle but there it all is in a nutshell. Merry Christmas to All!!

[@DonSutter-x6k]

Check the alignment of the drive shaft the nuckels should be align if not it will takeout the bearing faster and have a vibration

[@JamesWeeres]

Merry Christmas Cale and family..on the extra cat...number 6...check to see if Laure and Grant....have there 3 cats yet...pepper and her 2 little ones....lol

[@MB93WP]

We have a 8r 370 and our adjustable arm is Plummed in the tractor so we have all six remotes open to use the tractor was order that way with it on

[@JimDavidson-tb7qv]

I think a good name for the sixth, unknown, kitten would be “Freebee”

[@Ed_in_Md]

Chrome sockets on impact wrench- wear safety glasses!

[@rongrose3746]

Looks like your “ Dad’s “ dream is coming true. Nice addition to your system !

[@allenrittman5853]

Cale the Cat Man! LOL! Merry Christmas to the you and your whole family! May the coming year be a bright one!

[@Vinmaster73]

Which ever one is the most personable to you all name "purr". Merry Christmas to all from Minnesota! Some truly weird weather for this time of year. Never in my 72 years have I seen the lakes around the Twin Cities with open water at this time of year!🤔

[@phillipcole3068]

Loved the tree! I hope you all have a Merry Christmas this year. It will be different. Try to remember The Star that your father is truly seeing.

[@Shoutoutloud7]

It seems sunsets and sunrises in Nebraska require a separate KZbin channel.

[@zcole6612]

I have 2 places that will repair Milwaukee tools in the next town over . Well as long as they haven't been under water .

[@D2004slt]

Your at idle. More RPM’s more power for the ram

[@psg6314]

Happy holidays and God bless from GA

[@markrencher5863]

Merry Christmas to you and your family. Hoping you get more family together time this Christmas season. May the Lord bless you all.

[@williamshafer9182]

If you can turn your cylinder 180 degrees you should be able to get the force you need to lift up your load you may have to adjust your flow control for the own stroke.

[@pemman]

Look forward to you reaching your target Cale :)

[@peteparker7396]

Someone is up with the chickens!

[@rockercover]

Christmas tree looks spectacular! 🎄😊

[@redcauthen771]

At 3k difference in the cly, I would live with it to. To pay difference would be close to 550 bushels of corn off your profit. 😊

[@williamdeady4028]

Merry Christmas to the Carlson Family And I hope you all have a Happy New Year.

[@racecar021872]

I was just looking at the driveshaft from your seminar. Make sure to get the U-Joints to line up, I noticed that at 2:06 in the video the bolted on caps of the U-Joint are not aligned. They need to be aligned or it will take out the U-Joints again and/or cause a vibration. It should just pull apart at the rubber boot and be able to line the splines up to get the caps aligned again. If that doesn't work and it still is not aligned it may be twisted, in that case you might need a new driveshaft.

[@alanwalker9989]

Like the tree

[@virgilcollins4925]

Looking good doing a good job

[@criagcundiff2469]

Kitten names; One, Two, Three, Four, Five, and "Where the Hell did you come from?"

[@Jeffrey-Flys]

That Milwaukee 1” will really mix some pancake batter!

[@alexgon9627]

Merry Christmas to you and your family may God bless yall always ❤🙏🏼🌻🎄

[@dtktrucker]

Just remember, you can’t eat the cats if you name them.

[@kevindawson1280]

Name idea's for the kittens 5ton, overhead, furball, seabee, axel, JD . Well ya asked 😂

[@robertbcope]

Merry Christmas, indeed. That will be a very useful tool for you, I imagine.

[@jerryarcher1923]

They can see your tree from Spacestation…lol.

[@blairg311]

Love the tree Cale!

[@douglasmedlin7159]

The bearings on the U Joint are called needle bearings. Call one suprise since you have 6 instead of 5.

[@jjlittle81]

Chrome sockets on impacts are a thing that you can get away with until you can’t. Guy at our shop nearly lost 3 fingers and a thumb holding the socket when it exploded.

[@AmazingAirshowVideos]

Great video! Awesome new tool there.

[@katreniaclark]

Those are called universal joints, and those caps have needle bearings.

[@dennislamers986]

Cale I think chrome sockets are fine until they crack. Greyson for the Grey one

[@paulshamonis6362]

As far as using a Crome versus impact socket, an impact socket is not tempered to the hardness of a Crome socket, because it will work harden as it is used and will not fit as well in the fastener with consistent use, were a Crome socket is tempered harder and when used on impact tools can and will fail,

[@KnivesFAST]

Awesome job in the 🌲

[@bigdog2024]

You will break that socket with that big gun on any high torque bolt. Spend a few $$ and get yourself some impact rated sockets of the right size. If you don’t have them already. That 1” portable impact is a good investment at $1000 when you cannot use your air impact. Time saved is money saved.

[@jerryarcher1923]

Kitten names Eenie, Meanie, Mindie, Moe, Curly, Larry, and Joe.

[@joshuamcfalls990]

That is a beautiful 1in

[@glenpittman8735]

Do the universal joints on the drive shaft not have to be in phase?

[@BryanCorner-x3h]

You're doing a great job. Merry Christmas!! Kinda unsafe running the tractor in the shop for extended periods of time with no ventilation!!!!

[@douglasjackson1998]

The 1/8th twist in that drive line troubles me. Vibrations and premature wear of the U-joint are supposed to be a risk.

[@jeffreydye181]

Impressive Christmas tree!! I’m one of those ppl too. Go big or go home!

[@HurairahHomestead]

4:25 Why both short hair AND long hair kittens? What a lot of people don't realise is that cats...are NOT monogamous! When a queen goes into heat, she can mate with SEVERAL toms one after the other and literally end up with a litter of several kittens where each one can have a different father...all in the same litter! So, if you DNA test the kittens and compare, they all have half of their mum's DNA but, the other half could be an absolute crapshoot as to who the father is. You would need to start catching toms and checking with EACH kitten to find out who the father is of each kitten. So, if 3 toms had access to her and she had 6 kittens...it could be that 4 were from one tom, 1 from another and 1 from the 3rd, or 2 from each, or even 3 from 1, 2 from another and 1 from the 3rd, etc... Now, you say that it seems like there are more kittens now than there used to be? Feral mum cats have been known to help each other out with caretaking of kittens (not unlike babysitting).

[@kam08479]

Name the long hair kitten “HIPPIE”

[@TwoPuttGuy]

You're a good Man Cale. name one of the kitties Sam.

[@kubotabxtext3904]

Should have got the extended anvil impact

[@BrianSmith-cv6hd]

I would get some impact sockets for that new 1 inch gun I've broke some chrome sockets safety first

[@kevinburke3911]

Kitten names Benny,Walter,Floyd,Penny,Maude,Stella

[@melkingrealestate]

Might name the kitties after your kids.

[@jaybernieschoep3491]

Did you tell Laura what you wanted for Christmas 😊

[@raymooney6506]

Gee u can tear up a lot if stuff with the 1 inch But why not borrow grants their allways on road trips n he would not miss it for a week or too

[@jaybernieschoep3491]

Go to Steffen hydraulics for heavier cylinder

[@curtisanderson1830]

the gray one call Rags,

[@joeglenn1480]

Chrome work fine until they split?

[@rogerembry4777]

Kids and toys lol 😂

[@robertpappa5129]

Drive shaft yokes are out of time. They should be in line .

[@themyrrd431]

"that thing is large" that's what she said :)

[@Jeffrey-Flys]

1, 2, 3, 4, 5, & 7

[@tommcguire6081]

Nice 🇱🇷

[@dannyswindle]

Your gray cat reminds me of a "Russian Blue" color cat. I would call it Russian Blue. I have a beautiful gray born ten years ago: I call her Russian Blue. My good friend is an expert on cats. I call her cat woman, but she really knows cats. Congratulations, these cats will bring you many blessings.

[@donweden7199]

How 'bout Francis a.ka. Franboy

[@godoftheinterwebz]

Names: Milo, Beans, Rye, Wheat, Alfalfa and Maize

[@IAM...1111...]

💚 ❤

[@jeffsiegwart]

[@driver1421]

This video is interesting, but all over the place and showing nothing being done, also couldn't help notice the huge amount of corn laying on the ground, is that normal?

[@bigdog2024]

Cale manages everything so it looks like he gets nothing done but he stays busy doing little things (like replacing the motor on the auger, starting trucks and tractors, supervising construction contractors, maintenance, etc. ) that keeps everyone else doing what they need to do.

[@jaybernieschoep3491]

Buy set of two then you are set

[@lorenwarren2097]

Rosie with Riviter1 - 6. LOL

[@godoftheinterwebz]

*EVERYONE SPAY YOUR PETS*

[@larryreinke6136]

You can name one of your long hair cats " Hippie " and the other one "Bevis "

[@stevenhornbuckle8007]

Name one of them, Overhead!

[@jaybernieschoep3491]

Gray cat fluffy. Tan kitten terese jack Caroline thunder

[@johnbenvenuto2023]

the black one should be Topher and the other black should be NEO