New FC❗️ - Eurocopter EC-135 || Yu-Xiang F06 | RTRHobby

[@mysticaura5586]

You should make a video on the modifications you’ve made on this Helicopter and to share the links on the battery used and any other parts that you may have changed

[@AndrejSturm]

Hi, maybe I will ...

[@mysticaura5586]

I have this same Heli and it’s not the best flyer and days after my 1st comment I crashed it. I glued back its tail and will test fly it today cause everything seems to work. I may buy a new fuselage for it someday and plan on doing a similar modification as what you done so that I can fly her more confotably in smaller areas

[@mysticaura5586]

@@AndrejSturmyou can now probably fit a battery big enough to extend a flight time of 12 to 15 minutes none stop

[@juliandesmier2321]

Hi you are a very clever man indeed to figure out those modifications to fly it with the TX16S TRANSMITTER. Your videos are so good and many people will pay if you had a members club to learn your skills and modifications.Great videos.Thank you.

[@AndrejSturm]

Thank you, I really appreciate it.

[@Raptor50aus]

Yeah good idea with the battery mod. I will do the same when my Sea Hawk and Apache batteries start to lose their punch.

[@AndrejSturm]

And it's an easy modification to do. I soldered the cable with the XT30 connector to the stock connector with the body shell on :)

[@juliandesmier2321]

Hi Andrej will you be doing a master class with your settings for F06/TX16S sometime in the future?

[@peteheymes259]

This is a great helicopter NOW - You are right Thank you!! By the way: did you built in the F-150 ESC - modul also?

[@AndrejSturm]

I just replaced the stock FC with the F150 FC (Eachine E150 FC). The stock ESC on the F06 is already from the F150 helicopter. It's very easy to replace the FC - no soldering needed. If you put the F150 FC into this helicopter, you have to use a 3s Lipo as a 2s Lipo won't work - the main rotor will start spinning but it will immediately stop because the F150 FC would recognise a 2s lipo voltage as an empty 3s Lipo.

[@peteheymes259]

@@AndrejSturm Thank you for the comprehensive explanation!

[@winstonsmith7801]

Great modification. Proprietary batteries have always a concern for the longevity of a model.

[@AndrejSturm]

Thank you.

[@Flight6677]

F150 is a 3s power system. I see you used the stock 3s battery well. I am assumed you replaced the ESC. Is the motor ok for 3s long terms - more than 10 flights after maintenance on 3s at 11.1V if it’s designed for 2s at 7.4V?

[@Fadhil534]

make a tutorial on how to change it. I have an eachine e135 and it doesn't fly well

[@babyjoker8344]

My OMP M1 just crashed hard yesterday. I would love to put the FC from that into the RC ERA MD500. Your video makes me think it will work. I would love to see a tutorial of how to do. Fan of your videos. Cheers

[@AndrejSturm]

Hi, the M1 FC & ESC would not work in the RC ERA MD500 helicopter because the main rotor on the MD500 helicopter spins in the opposite direction than the main rotor on the M1.

[@thatsmyrc]

Is this a better heli than the md500? Debating on which one to get back into the air. Flown helis yrs ago and drones but don’t want to go to expensive as I’m sure I’ll make mistakes getting back into the pilot seat.

[@AndrejSturm]

In your case I would go with the MD500.

[@Flight6677]

What are the details? It’s important to tell the audience the details otherwise nice flight but not helpful at all. There include the internal changes, the throttle and pitch curve and etc.

[@guntherwenzel9650]

Die Bindung mit S-FHSS hat funktioniert, aber die Status-LED leuchtet konstant rot. Ich würde mich sehr über ein Einrichtungs-Video mit Radiomaster freuen.

[@lynsmith1096]

Good video

[@AndrejSturm]

Thanks

[@andrewberdo3903]

What receiver did you use in this helicopter to be able to bind it to your ts16s?

[@AndrejSturm]

Internal receiver in the FC - SFHSS.

[@andrewberdo3903]

@@AndrejSturm thankyou

[@dogtrpp]

I have my F06 apart and see that it uses the F150 ESC. Did you just solder on a XT30 connector to the original F06 ESC?

[@AndrejSturm]

@@dogtrpp Yes