new GLM 165-27CG

[@TheSaint135]

I'm so glad I watched your video. I couldn't understand why the round up button wasn't working on my unit and sure enough it was because I have it set up for meters. Thank you!

[@MehdiRF]

Thank you for your in depth review, I'm switching from 50 C to this laser.

[@tooltipswithtommy]

You'll like it a lot.

[@phases782]

I went to lowes twice for the 99 model that was on sale for 69 and both days despite inventory saying they had them we couldn't find them.. so out of blue they offered me the glm165_27c for the 69 dollars and holy whack this this is awesome. After watching these vids I am a bit jealous of the green but..this thing is so cool. Esp the indirect measuring! This was a fun kinda spoil myself thing during this project I'm doing to help measure attic better and I have used it non stop for everything, way more use than I expected. Could even get pitch of my roof with the level tool lol which I needed to know. 8/12 if you're curious xD. I got but haven't yet tried the app the Bluetooth connects to for I guess building out room diagrams..

[@tooltipswithtommy]

Score

[@tooltipswithtommy]

The app is free, you should try it.

[@phases782]

@@tooltipswithtommy yah I got and installed and connected it with BT just haven't played with it yet but I will soon!

[@phases782]

@@tooltipswithtommy fyi the battery pack is compatible with 165-22, 25G, 27C, 27CG, 27CGL ... I might have to get one I already burned through my first set of batteries xD

[@user-lb4vu4cq3x]

I have nt seen a video yet that demonstrates the inclinometer. Can you put the tool on a rafter and get the pitch immediately or in degrees?

[@tooltipswithtommy]

one of the coolest things about this laser, i didn't even mention, is it's green diode. they do still offer red, for less money, but of course i had to get green. way better visibility.

[@DT-vc7hd]

WRT a green diode, I understand that it's more visible (to the human eye), but does that translate to throwing power? In other words, is it primarily a short-distance, indoor technology, or is it an across-the-board upgrade from the red?

[@DT-vc7hd]

Nevermind, I think I found the answer, "When it comes to outdoor use, the advantages of green lasers in bright light begin to disappear. This is because under sunny outdoor conditions, you will need to pair your laser with a detector even if you are measuring relatively short distances. Importantly, green laser light dissipates faster in bright outdoor light than red laser light, which means that they can actually be harder to measure than red lasers at significant distances."

[@tooltipswithtommy]

If you want an outdoor measuring tool, check out the glm400.

[@pingpong9656]

All I want to know, is it useful in real world application. Does it improve productivity over a regular laser measure or is it just gimmicky stuff that will never get used.

[@tooltipswithtommy]

I don't think it's gimmicky, but you have to need it. So if you bid out jobs, or use a tape measure daily, especially for distances over 35 feet, then absolutely is useful. Some of the more obscure functions that you may never use can be called gimmicky but they're always nice to have just in case. Only you can answer the question whether you need it or not.

[@pingpong9656]

@@tooltipswithtommy That is true - would be nice to have a video of someone using it to quote a large job and maybe do a side by side with regular laser measure to get an idea if it improves work flow and calculation over paper notes - just food for thought!

[@tooltipswithtommy]

Do I used to clean carpets when I was much younger, and I remember how my boss figured sguare footage, something like this would've saved a lot of time. That's my real world scenario. Maybe I'll do a video of how long it takes using the old way, versus a laser measure. 🤔 good advice.

[@cletustollery6914]

If any of these things work within a 1/16 for trim, I'd love it. I don't need it to play videos or stream audio, just be accurate. Otherwise, I'm an old carpenter and will stick to my hard tape for measurements and my PLS line for cabinet layouts. Any help on what is "practical" vs gimmick would be appreciated. Nice video and info, though!!

[@benjaminlavigne2272]

I think it is cool to have graphical interface. However, the battery drain is just ridiculous. I have an old laser measure from Bosh that I have changed the battery 2x in 5 years. Plain old LCD screen.

[@irvinbuilds]

I started using for base and it works so good. I usually take an 1/16 off my measurements to make it snap.

[@christophersouza8792]

I was just gonna reply it works for base, well speed base anyway. Slam that shit in Brother 😂

[@bluefire7849]

Whats the difference between blaze and professional. Which is the latest one

[@tomprovan50]

great video can you make one going over stake out, and can you set and lock an angle so if you need 2% grade for plumbing pipes?

[@tooltipswithtommy]

I haven't been able to lock the angle measurements. I'll see if I can do a stake out video.

[@brandondee2093]

That was the only thing I wanted to see too was the angles and you didn’t even have it calibrated. Set it to the 1/8th anything more is impractical then you go on to set it to the 1/16 🫤

[@TrueMill451]

Thank you for your video, I'm a trim carpenter, thinking of using this for base molding measurements. Can the unit display measurements down to millimeters? Can the unit remember a series of measurements similar to making a "cut list"?

[@tooltipswithtommy]

Yes it will do mm, with half a mm precision. The unit will store up to 30 measurements. Hope this helps

[@louiemacni6069]

Since GLM 150 c ( 150meters red laser with camera viewfinder) is on sale, should I get it over the newer version GLM 50 (50meters with green laser) if the price diff is only 50dollars?

[@tooltipswithtommy]

Hard to say, the newer 50c has some features that the 150c doesn't have. But my favorite is the 150c. And for $50 more that's the one I'd get

[@louiemacni6069]

@@tooltipswithtommy thanks, my only problem with 150c is the red laser for outdoor work, but it has a camera.

[@luisguerra6400]

Will someday Bosch would launch a green laser version of the 400c? I want to buy it, but I don’t know if they’re launching a green version any sooner

[@tooltipswithtommy]

I'm waiting for that as well

[@muhammadhumayun2703]

what is difference between this GLM 165-27 cgl & Recently Launched in Europe & Australia Bosch GLM 50-27cg they both look identical functions look same is it only regional name difference or actually any function's difference

[@tooltipswithtommy]

That's a good question, I can't say for sure, but I think you are correct. Just regional name difference.

[@Reckless335]

So I was doing some research comparing the different models, and the letters that follow the 27 actually stand for different features that it has. So, GLM165-27, vs GLM165-27C, 27CG, and 27CGL. 27 will have no "additional features". 27C means "Connected" meaning it has the bluetooth capabilities to connect with the phone app. G means Green laser VS the standard red, and L means it comes with the lithium battery already (you don't need to purchase it separately)

[@tooltipswithtommy]

Thanks for that

[@bl8550]

Second Question: With this device, can I change its 'measure from' face from rear to front of the device?

[@tooltipswithtommy]

Yes you can measure from the front, the back, or the mount screw.

[@bl8550]

@@tooltipswithtommy Great! Thanks.

[@bl8550]

First Question: I am looking to purchase the GLM165-25G (just no Bluetooth). One indispensable feature that I have used for over a decade is to add/subtract subsequent measurements. I do not see + or - buttons. So, how does one add or subtract measurements with this unit?

[@bl8550]

Please disregard question. On an enlarged photo of the device, I noticed the +/- symbols on the arrow keys.

[@jimbell4137]

I want to use such a device with a plastic corner-cube reflector plate, which reflects THOUSANDS as much back in the direction of the emitter than a white paper-like surface. (See Lambertian reflector.) I want to measure 500, 1000, 2000 meters, with a resolution of 1 millimeter . Problem is, I don't think the device will 'wait for' such a delayed reflection, even when it arrives late.

[@tooltipswithtommy]

That is interesting. I think the distance equation in the tool, limits is distance. Regardless of the surface it's hitting.

[@jimbell4137]

@@tooltipswithtommy well, there are at least two limits. If the beam doesn't hit anything, there is nothing to detect. However, if the object that reflects the light is further away then the device expects to see, it may also report no measured distance.

[@fuloplehel]

Hello, I have this tool with the lithium battery pack, and it has the USB C port and can be used while on the charger. But here in Europe we don't have the belt clip in the package. It has also the possibility to change the language in the menu. But I don't know what is the pro 360 function.

[@tooltipswithtommy]

Thanks for the update.

[@fuloplehel]

@@tooltipswithtommy I don't know if your tool is exactly the same in terms of functions. In the setting menu options I have Pro 360, it can be turned on or off, but I don't know what it is. I can't find it in the manual. Have you any idea? It is not the display rotating function or the level inclinometer.

[@tooltipswithtommy]

I still have no idea what it is either. But it sounds like the functions are the same.

[@fuloplehel]

@@tooltipswithtommy OK thank you for your comment.

[@k4x4map46]

Middle if the device measurement...everyone glosses over this area of measurement...how does it work what are the benefits. I already know what i need to for just need to know if this device will perform that measurement (P2P)

[@tooltipswithtommy]

It will measure from the middle of the device. While I haven't used the measuring location, I imagine it would be used while mounted to a tripod with a plumb hanging to a point on the ground?

[@k4x4map46]

@@tooltipswithtommy I use mine to measure trim heights for display exhibits signs banners etc. tired of laying on the floor to shoot upwards. I have a monopod with a 90 degree swivel 1/4-20 adapter that will fit. the question we have do you have to mentally add the monopod length or does the device measure from the ground to the ceiling for example as a 'point 2 point' device will do? Not even Bosch explains this but a Leico has P2P and its clearly described in the manual. Not trying to spend mega bucks if the Bosch here will do the same thing from the middle tripod position. Might have to go to Home Depot and do some testing...what is the measurement from the middle of the device? Maybe a test on your end? Thanks in advance!

[@tooltipswithtommy]

@@k4x4map46 I'll have to do a little research on this for you.

[@k4x4map46]

@@tooltipswithtommy Copy that!! I have a co-worker that has the GLM-400C and the manual talks about middy measurements as well. Tomorrow we shall experiment with my monopod setup!

[@tooltipswithtommy]

@@k4x4map46 also see if the indirect measurement is something that will help you

[@journalisteditor4718]

Hello, I need help, do you know how to know the date of manufacture without opening the box, because I intend to buy a device, and I am trying to check the date of manufacture from the seller on eBay without having to open the box thank you

[@tooltipswithtommy]

I don't have the answer to that. Sorry.

[@georgeomalley6066]

Good Review 👍

[@tooltipswithtommy]

Tanks

[@JWS1968]

Can a 50meter measure do longer distances? Is there just an accuracy drop off or does it just not give a reading over the range limit? I don't need that kind of accuracy for what I'll be using it for. I can be within a couple of meters and it would be fine.

[@tooltipswithtommy]

I think they will show an error message if the distance goes over 165 feet or 50 meters.

[@munindra.koppineedi]

Hello, do both AA batteries and lithium battery module work for GLM 50-27 C or CG

[@tooltipswithtommy]

I've yet to get the lithium battery module, but I'm led to believe it will fit in all the measuring tools that look like the one I have in this video.

[@phases782]

The manual for the pack lists compatible models as all 165 versions

[@wrcbiomedica5521]

Does the glm 165 27cg model have the ability to measure in meters, or do you only measure in feet?

[@tooltipswithtommy]

It does sae, or metric

[@jaimequirozm.4185]

el modelo blaze es mas actual que el professional?

[@tooltipswithtommy]

Si

[@jaimequirozm.4185]

@@tooltipswithtommy gracias

[@tomthompson7400]

it needs a diagonal setting , even if it just used the triangle that the two back corners make in a 90degree corner it would be something , but for a metalworker its a big miss.

[@tooltipswithtommy]

Could you elaborate? What are you trying to measure? Square?

[@tomthompson7400]

@@tooltipswithtommy inside diagonals on i beam structures , usually with verticals on the corner too.

[@brianlee6428]

how do you change the language. mine is french and i need english

[@tooltipswithtommy]

Press settings, then cycle to the three dots and press function, then cycle to language, press function, you can handle it from here. Good luck. Let me know if that helped.

[@brianlee6428]

Thank you got it.

[@DT-vc7hd]

How well would this work in place of the GLM400C assuming you didn't need the extra distance?

[@tooltipswithtommy]

If you don't have an exterior measuring application, this would work well. If you need to measure outside, nothing beats the 400.

[@earljklec1684]

Question does it do feet and inches? Or inches function ?

[@tooltipswithtommy]

It does either one, you can choose.

[@davedave9780]

Can you set it to always round to 1/8 or do you have to hit the button everytime to round?

[@tooltipswithtommy]

Once you set it, it will stay set, until you change it.

[@davedave9780]

@@tooltipswithtommy Cool thanks... I'll be buying one tomorrow.

[@earljklec1684]

Dude that’s a game changer ! Wanna trade ? I need measurements to 1/16” doing trim ! Great video !

[@tooltipswithtommy]

Unfortunately that's how these things go. Always improving. Means last year's version is outdated. Thanks for the feedback.

[@silloh7009]

I just returned the GLM165-27CG to Lowes to get a new one after it was nearly 4 inches off right out of the box the same day I purchased it. Just returned home with my second one and opened it up put brand new batteries in it and it’s off by nearly 2 inches. For something that claims to be accurate up 1/16” this is way too far off. Flipping through the user manual there is a way to calibrate the grade but there does not seem to be a way to calibrate the measurement accuracy which is the most important function of the tool. I will not be purchasing a third…

[@tooltipswithtommy]

That's strange, I own 5 different models, and they are all spot on accurate.

[@silloh7009]

I thought it was strange too. I saw so many positive reviews about them and just as many specific reviews about how accurate they are. I think if I were a realtor, carpet layer, wood flooring guy needed close enough square footage these would be great. I am a woodworker though and I just can’t trust the inconsistency…

[@tooltipswithtommy]

@@silloh7009 that's fair

[@ealdydar]

Been looking at upgrading to one of these. Anyone know the difference between the 27 and the 22?

[@tooltipswithtommy]

More features are available on the 25, and 27. Haptic feedback, inclinometer, Bluetooth. I went on the Bosch website to get you an answer, but I couldn't get the compare feature working. So i just checked the details of each one. I may have missed some things, too. Hope this helps.

[@davemeneorealtor]

If you measure distance by putting the laser against the wall, then try the continuous measure they are not even close.... What am I doing wrong....

[@tooltipswithtommy]

I need more information? Does the number change by huge amounts?

[@davemeneorealtor]

@@tooltipswithtommy when I put the laser against the wall it measures 23.69'. when I stand b ack and use continuous measure it is 18'2 Let alone its very hard to start at a spot, you do not know where the laser it going to be with you press the button so it needs to be done twice....

[@tooltipswithtommy]

@Dave Meneo - OnlineTXHomes when I get home, I'll try to duplicate your issue. Honestly I've used mine many times with no weird measurements. You may have gotten a defective device?

[@davemeneorealtor]

@@tooltipswithtommy is it me or when you do the continuous its hard to start at the beginning.... I wish it was a two button push, one for the light the second to start, but thanks for your help.

[@tooltipswithtommy]

@Dave Meneo - OnlineTXHomes Dave, I see what you're talking about. Because it's live measurements when you activate the laser, it measures whatever is on. And it may not be where you want it. I know bosch has responded to end user feedback in the past to improve the devices, perhaps some productive comments on their site may get results? I don't use the min max at all, mostly square foot. But i feel your pain.

[@danponlaser7279]

great

[@muhammadhumayun2703]

it's tape measuring mode is not accurate I just bought this when u measure it in number mode at the same spot tape measuring is 3" different

[@tooltipswithtommy]

I don't think it uses the length of the device. When I used it, it was spot on.

[@skliros9235]

The most important feature the green laser, and you don't even show it....

[@tooltipswithtommy]

Right? What am I thinking? I'm horrible...

[@skliros9235]

@@tooltipswithtommy I'm at the store. See this measure has a green laser. I'm like cool, I'll look online real quick to see if the green laser is worth it. Come across your video, and I'm waiting, and waiting, while you go over the other bogus features nobody will ever use! And then the video comes to an end, without you ever showing its most basic function and feature.😔

[@muhammadhumayun2703]

can it measure point to point to point to point to point Like Leica

[@tooltipswithtommy]

I'm not sure what you mean, I don't have a Leica to compare. Can you be more specific

[@malacruxnorman3162]

feet and inches lmao 23 1/16 ..... stone age lol

[@tooltipswithtommy]

thanks

[@leftypolly9467]

uwexw5 #von.ong