New

[@MikeGDetailing]

Available at Detailed Image to order. Gyeon Pure Evo (30 ml): www.detailedimage.com/wax.php?id=48173&url=detailedimage.com/Gyeon-M91/Pure-Evo-P2588/30-ml-S1/ Gyeon Pure Evo (50 ml): www.detailedimage.com/wax.php?id=48173&url=detailedimage.com/Gyeon-M91/Pure-Evo-P2588/50-ml-S2/

[@vasileiospetropoulos2046]

can you also apply 2 or 3 coats? If you want? Or not recommended?

[@stephenlouden480]

I love this stuff because it's so glossy and i can take my time and enjoy doing it over anything else. it's my favorite for sure

[@MikeGDetailing]

This one is a bit long. But I wanted to pass along the information on the coating. Thanks for watching.

[@HoosierDaddyDetailing]

I've only installed the can coat "as a topper" from Gyeon. I'm definitely intrigued though on trying out the Pure Evo product. Thanks for sharing your experience

[@blackpanda7612]

Lol you made me literally just purchase a bottle of Gyeon Evo Pure Light (30ml) and Gyeon CanCoat Evo just a few minutes ago of watching this video. I'm going to pick up their GYEON Q2M Primer as well. Unforunately they only have the 30ml bottle of Pure Evo in my region but that should be enough for my car. Awesome video and thank you :)

[@J1Z06]

Brilliant idea on numbering the towels. I get lost often and have used over 20 towels removing some smeary coatings . I have pure but haven't used it yet. Thanks for sharing.

[@bosoares]

Careful touching your phone while coating a car, I did that once and didn't realize there was some coating on my gloves and then later found a high spot on the phone's screen which I didn't want to polish due to the oleophobic treatment from factory. I now try to keep my phone away during coating installs to avoid wanting to touch it since you can't really feel if your hand is a tiny bit wet from coating that dripped from the bottle.

[@oggyoggy1299]

I CanCoated my phone and my iPad screen. Worked great!

[@Bull1the1Great]

Great video . This is probably gonna be my first coating ...

[@codypalmer6804]

Congrats on 1k subs!

[@MikeGDetailing]

Thanks

[@kuba7875]

Great video, I just bought a syncro evo kit , I am very excited with new evo series 😀

[@MikeGDetailing]

Post up what you think when you use it. I will be using it in the next day or two. I hope this version is better than the previous version.

[@APASSIONFORDETAILING]

Great video Mike

[@MikeGDetailing]

Thank you. Glad you enjoyed it

[@APASSIONFORDETAILING]

@@MikeGDetailing still unsure what to get pure or mohs to hard a choice

[@MikeGDetailing]

@@APASSIONFORDETAILING haha. Both are good. If you want slickness then get Mohs. That is one main difference between the two.

[@APASSIONFORDETAILING]

@@MikeGDetailing slick to touch is that what you mean was mohs really candy like too ?

[@MikeGDetailing]

Yes slick to the touch. It is not as candy as pure. Still a good look but just not having that super dipped in glass look.

[@klasseact6663]

Guz, I just ordered the Pure EVO for my new car, so I'm now waiting for it as well as the weather to get warm, especially night temps because I'm working outside. I plan on doing a Chem decon, Bilt-Hamber Touchless pre-wash and Bilt-Hamber Auto Wash before application for a clean surface. To be on the safe side I'll be doing a pre-wipe using Feynlab RW mixed on the stronger side and THEN applying the PURE EVO👍👍

[@MikeGDetailing]

I would still do a panel wipe after feynlab to remove the surfactants from it. So no polishing?

[@klasseact6663]

@@MikeGDetailing yeah I'm looking to use my GG6 & GG3 w/ GG orange pads and 303 polish or even finishing polish as the paint looks pretty good, only slights RIDS on the area below the windows. I have other polishes but they're a bit aggressive for a new car...thoughts?

[@klasseact6663]

@@MikeGDetailing I don't have a panel wipe persay, what do I need to make one, thought the strong Feynlab would be good enough as it's a pure cleaner that can be made to be strong🤔

[@MikeGDetailing]

@@klasseact6663 should be all you need. It’s a light color so that helps hide anything. I looked on feynlab’s site and didn’t see anywhere that pure rinseless can be used as a panel wipe. Some local auto parts stores carry the mothers CMX panel wipe which is decent.

[@oliverjago-smith8764]

What an amazing video review thank you

[@MikeGDetailing]

Thank you. Glad you enjoyed it

[@ryanb8736]

Correction. Gyeon claims only Mohs EVO and Pro Infinite Base one use fluoro modified polysilazanes for the first time in the car care industry and it’s not in Pure. Pure and Infinite Base 2 are high in SI02 instead. Not sure they are the first one in industry also. Not that it matters. Polysilazanes coatings are the ones that sweat. Just like Mohs Evo and Infinite Base One.

[@MikeGDetailing]

I made that correction on the video for Pure. But yes this is correct

[@brenthill5596]

I'm thinking about single coating with Pure EVO and then top it with CQuartz SiC for the slickness.

[@MikeGDetailing]

Save time and just get Mohs Evo rather than going through all that work. From testing the new Gyeon Evo coatings Mohs is better than Pure in overall performance.

[@brenthill5596]

@@MikeGDetailing Wouldn't the Pure EVO give more of a pop gloss wise or are the 2 comparable? I would sacrifice some durability to get a little more gloss.

[@MikeGDetailing]

@@brenthill5596 polishing is going to give you 90-95% of the look. Mohs looks great on any color. No need to add Pure and then a different brand manufacturers coating. Mohs can do that by itself. It is more stout than Pure and SiC.

[@smart3k]

Great video and Happy new year! Would you recommend using this on a white car? Would a 30ml be enough to fully cover a small hatchback? (Fiat 500). I know a lot goes a long way with these but the bottles always look so small lol. Will be my first time using a ceramic coating as i normally use graphene liquid or spray wax but wanting something more durable. I have Turtlewax to the max wax on it atm that's starting to fail but the car will be getting a polish before applying this as i have a few swirls i need to remove first.

[@MikeGDetailing]

30 ml should be enough for your Fiat. The included applicator is a coating saver which helps to save product. The good thing is it’s a one layer coating. Coat the paint first and if you have any left over you can coat the faces of the wheels and side glass

[@vasileiospetropoulos2046]

@@MikeGDetailing can you also apply 2 or 3 coats? If you want? Or not recommended?

[@MikeGDetailing]

Maximum 2 layers. A third is a waste of time

[@PC-yw9co]

Hi man, love your videos, hope you can answer this question, how do you compare Pure Evo to Synchro Evo? I have to choose between these two to protect my car which is a metallic “pearl” black, what interests me most is protection of the car and durability of the coating even if I am attracted by the candy effect of Pure Evo, does Skin increase Mohs gloss?

[@MikeGDetailing]

Thanks. Skin will add some gloss to Mohs. It won’t darken as much as Pure. Hydrophobic behavior seems a bit better with Syncro. Another option is Mohs topped with CanCoat. That will add that candy gloss more than Syncro. I’m a huge fan of CanCoat and it’s versatility.

[@PC-yw9co]

Thanks for the reply, you recommend double o single layer mohs + can coat?

[@MikeGDetailing]

@@PC-yw9co since you want protection do 2 layers of Mohs

[@devinweldon2]

I’ve been enjoying your videos on the new Evo coatings, very informative👍🏻 I am curious as to your thoughts on ceramic infused shampoos, like Ethos Ceramic Shampoo, for use as a maintenance wash? Would you consider it safe for weekly washes, maybe once monthly, or just overkill on top of a coated car? I’ve been using it for over a year on my wife’s car and it seems to have built up a good bit of hydrophobicty, but it’s not coated yet. Just wondering if it’d be worthwhile to use during weekly washes after it’s coated.

[@MikeGDetailing]

I don’t use them on y personal vehicles but it’s a fast and effective way ay to get beading and sheeting. Once a month would be perfectly fine

[@devinweldon2]

@@MikeGDetailing thanks man, and keep up the great work!

[@DanIel-ep4qj]

It was tacky on me smeared up not what I expected. I was in doors temp was about mid to high 60s. Cquartz 3.0 is better to me but I will give pure another go.

[@MikeGDetailing]

How long did you leave it on before wiping it off?

[@DanIel-ep4qj]

@@MikeGDetailing I cut the hood in fours the first two sections I want to say about 3-4min. The next two sections no more then 2-min each. The entire vehicle was prepared, 1step, panel wipe, coating.

[@MikeGDetailing]

How was the humidity? When I used it it was around the same temperature as you. The humidity was low. What towels are you using?

[@DanIel-ep4qj]

@@MikeGDetailing I use rag company pearl towels. Humidity was around 50%

[@MikeGDetailing]

I never liked the peal towels. They load up with too much product. I still prefer the edgeless 300.

[@Mason-RRC]

Great video! How do you know when exactly to remove the coating? I’m afraid I would remove it too soon or too late. I know temperature and humidity has a lot to do with it, but this will be my first coating and want to make sure I remove it at the correct time.

[@brettautrey4117]

I found that you will know after a panel or 2. You can wipe off in as little as 30 seconds or as long as 10 minutes. I started with 5 minutes as a midway time. I was in a low humidity and A/C garage and I found it getting pretty tacky after 4:30 so I started removing at 4:00-4:30 minutes.

[@Mason-RRC]

@@brettautrey4117 this may be a dumb question, but if you can wipe it off in 30 seconds, why wait and longer? Are there any benefits to waiting?

[@brettautrey4117]

@@Mason-RRC I would think longer is better. It was told this time related to a call with the distributor of Gyeon based in Colorado

[@MikeGDetailing]

Jeff explains it perfectly in this video. kzbin.info/www/bejne/aJSQZICEZstnpLM

[@ollebraconier48]

Hi, thanks for a very good video! I just ordered this one but Im still curious if I should've bought Mohs instead. The reason I bought this is the appliance time not being so hasty with the flash time. However both you and other say "it is not that slick". Do your refer to the wipe off only or will this persist when cured? I want a very slick no friction surface. Should I go for Mosh instead if I want that? Thanks!

[@MikeGDetailing]

You will want MOHS. Pure does not get slick.

[@ollebraconier48]

Just changed my order. Thanks!

[@miguelpronesti2607]

Do you think I could use this as a top layer for MOHS instead of skin? Reason being that it would provide me a better boost in gloss over skin.

[@MikeGDetailing]

I guess you could. I never tried that. Or you can use CanCoat.

[@ninetres187]

Did you only do 1 layer? I watched the whole video a couple weeks back but forget. I’m installing it tomorrow and bought the big bottle so I was thinking I’d add a second coat (even though it isn’t necessary).

[@MikeGDetailing]

I did one layer on one door. You can do 2 layers. At 1 hour apart. I just read a post from the Gyeon rep that sent it to to me and he said a second layer increases gloss.

[@ninetres187]

@@MikeGDetailing Thanks man. Looking forward to using it! White car so I need that extra gloss.

[@sergiomengon5857]

Good job do you need to add a topper on this coating.It’s sand alone product . Only on maintenance you add there ceramic spray on. Thx

[@MikeGDetailing]

No topper required as it is a stand alone coating. Maintenance is in the included booklet on which products are recommended for maintenance.

[@sergiuangelo]

hi Mike, are the TRC edgeless 300 you're favourite coating removal towels still ?

[@MikeGDetailing]

Yes or the CarPro 2face towels.

[@brettautrey4117]

I was surprised that you used 1/4 of a 30ml. That size is designed to be the amount needed for a sedan size car. The 50ml for a SUV or larger car. I used about 7/8 of a bottle on a standard size sedan and I didn’t even use it on headlights, trim, glass or anything else.

[@MikeGDetailing]

I was sent the 50 ml bottle.

[@SaintVacuum]

After topping with the CanCoat...how does it affect the slickness feel?

[@MikeGDetailing]

Pure Evo and CanCoat are not slick. Mohs on the other hand is slick.

[@chr1sd26]

How did you get your hands on this ?

[@MikeGDetailing]

Care package sent by Gyeon USA. kzbin.info/www/bejne/qoinmmWir85-btU&ab_channel=MikeG

[@marksafady1059]

Cool video. Pure evo is more hydrophobic than mohs evo. So is One.

[@MikeGDetailing]

Pure and Mohs both have nice hydrophobic’s. Negligible in that regard.

[@agdom5596]

I wish to try this PURE EVO to replace my 2+ year UK3.0. Do you think PURE EVO can out perform the UK3.0 in terms of durability and hydrophopic? Any update for this car since the videos are 2 years ago?

[@MikeGDetailing]

After my experience with Pure Evo I would recommend CQUK 3.0. CQUK 3.0 simply performs better. Pure was polished off and I went to Armour Detail Supply Quartz which is superior to both coatings based on my experience using it. If you ca get ADS Quartz then get that. If not stick with CQUK 3.0.

[@agdom5596]

@@MikeGDetailing thank for the information.. How about the mohs evo?? Since my local detailer didn't have the ADS quartz.. They only have gyeon and Carpro products line up for sale..

[@MikeGDetailing]

@@agdom5596 mohs is a better option than pure. It’s a better coating than pure.

[@saulmunoz3731]

@@MikeGDetailing Which way CQUK 3.0 performs better than Pure EVO? Is it more durable? CarPro rate it18-24 months coating.

[@MikeGDetailing]

Better durability. CarPro’s claims are conservative with 2 years. It definitely can last longer.

[@Mason-RRC]

What state are you in? What’s your humidity typically? I ask because Gyeon says the higher humidity the less time you should wait before wiping it off. I’m in Georgia and it’s typically 85%+ humidity here. I’m getting to try this Pure EVO and CanCoat combo. This will be my very first attempt with a coating. The last thing I want is to screw something up. I don’t want to leave it on too long or remove it too soon and not let it have it enough time.

[@MikeGDetailing]

I’m in Southern California. I don’t recall the humidity when I did this. It was applied during the Christmas holiday. Gyeon says it is ok to wipe off with 2-3 mins and it will be fine. Your initial test spot will be key to see if it is flashing fast.

[@lukejoseph]

Hey Mike! Can Pure be applied to all surfaces sans the front glass? Such as headlights, side/top glass, window surround trim, piano black pillars and such? When reading Gyeons documentation it reads as “only painted surfaces”. But based on your reviews that seems to not be the case?

[@MikeGDetailing]

@@lukejoseph when I spoke to the rep prior to using this pure is the coating that is recommended for trim other than CanCoat. The only surface he told me it wouldn’t work was on the front glass. I never tried pure on the side glass but I don’t see why it would not work. And yes it’s fine on black pillars and headlights.

[@lukejoseph]

@@MikeGDetailing Thanks Mike! I swear anytime I am doing research on a product, you either have a video and/or a post on one of the detailing forums about it. Very much appreciate the work you put into them.

[@MikeGDetailing]

@@lukejoseph thanks. Glad I could help.

[@AliSatchu]

I have applied the ppf evo ceramic coating to my Tesla with a matte xpel ppf film. Would you say it’s a good idea to apply the ceramic detailer after it cures in 12-24 hours? As a sacrificial layer?

[@MikeGDetailing]

I would say you are ok to wait until the first wash. I would use the detailer only if you will see rain as it cures for a week or two.

[@AliSatchu]

@@MikeGDetailing I am expecting rain over the next few days… would you say it’s worth applying as an additional top coat?

[@MikeGDetailing]

@@AliSatchu Gyeon says it’s good after 12 hours to get wet. I think you will be fine. You can use the ceramic detailer after the first wash. I don’t too my coatings after application and never had a problem. I wait until the first wash to top it with something.

[@ericridge8694]

Hi , is PURE ok to do the whole car ?? Trim , glass , paint , chrome ?? Thanks !!

[@MikeGDetailing]

It will work on those areas. Gyeon told me it won't work on front glass.

[@gseybold]

@mikegdetailing i am considering this product for my black Bullitt. How is the product holding up?

[@MikeGDetailing]

On a daily driver the coating made it to about the 2 year time frame. Gyeon has an up to 3 year claim so it technically met that claim. It is a pretty good coating but if you are in the states I would consider Armour Detail Supply Quartz. I also still like Cquartz uK 3.0 better than Pure Evo. Armor Quartz beats them both thus far. Based on the performance I am seeing by the Armour Pro coating at almost 9 months and the 6 months performance of Quartz, I will say it is already a proving to be a better coating than Gyeon Pure Evo. armourdetailsupply.com/collections/protect/products/armour-ceramic-coating?ref=sdqsara4

[@colbygraves9298]

Can this be applied to PPF? I would really like to use one coating for the whole car if possible instead of splitting it up PPF/Paint. If it were your car, would you go to the trouble of doing a different trim coating such as CanCoat? Or would you just use Pure on everything? How does this compare to Diamond Protech Diamond Body in terms of application and gloss? Thanks!

[@MikeGDetailing]

You most certainly can use this on PPF. I was told by the Gyeon rep to not use it on trim. I did not try Pure on trim. CanCoat works on trim for sure. Is the trim new or does it need restoration? If it needs restoration then I would not put any type of coating on it. When it comes to comparing Pure and Diamond Body, the application is fairly similar. Hydrophobic behavior goes to Diamond Body. Gloss is about the same. Slickness will go to Diamond Body but not by much.

[@colbygraves9298]

@@MikeGDetailing Hey thanks for the reply. Awesome! That makes things a lot easier. The trim is brand new so I’d like to protect it from needing to be restored. I was thinking Pure for PPF/Paint and then CanCoat Evo for the trim and wheels. Interesting. Which would you say is easier for a beginner coater? I have little to no experience with actual ceramic coats. I have messed around with some SI02 spray sealants before though. (OG Drying aid) The application on DB36 is fairly more involved correct? Thanks

[@MikeGDetailing]

@@colbygraves9298 CanCoat works well on trim and many other surfaces. You could also use Pure on the wheels. Don’t be intimidated. Applying a coating is not hard. If you are not quite ready you could always use CanCoat. It’s a good start to get into coatings. One thing I forgot to mention is if you go with any of the Diamond ProTech coatings then get their panel prep. DB36 has a long flash time. It sort of hazes and once it does it can be wiped off.

[@colbygraves9298]

@@MikeGDetailing Cool. If I were to buy the CanCoat for the trim would it be worth top coating Pure since I already have it or would you skip it? Whichever coating I go with I plan on buying the designated panel prep. I think it’s “Gyeon Prep” for Pure and “Body Prep” for DPT.

[@MikeGDetailing]

@@colbygraves9298 that’s completely up to you. The benefit is CanCoat is super easy to use and quick to apply. If the paint is dark then I would say go for it. You could use it as a yearly maintenance topper as well.

[@garrett6743]

What’s the durability of Pure by itself? What is the main difference when comparing to Graphene coatings? I’ve used two different Graphene coatings and I’m interested in trying other coatings.

[@MikeGDetailing]

Pure is rated as up to 3 years. Keep in mind that graphene coatings are still ceramic coatings. They are just infused with graphene oxide. Graphene was supposed to be less prone to water spotting but I saw zero difference in that claim. I would say try a different coating if you feel the need to.

[@COC785]

Can I use Xtreme Solutions Topper spray over a fresh coat of Pure instead of Gyeon Cure? They're both silica base and I already had some XS Topper.

[@MikeGDetailing]

That will work fine for maintenance

[@ericridge8694]

Hi Mike just a thought , wanted your opinion if you think you can top PURE EVO with MOHS EVO ??

[@MikeGDetailing]

I don't see the benefit of this. It would be a waste of both coatings.

[@ericridge8694]

Ok thanks don’t know much about them , was just thinking for The slickness of MOHS on top , thanks , keep up The videos , there great

[@뿌에에에엑]

what is difference MOHS Evo and Pure Evo?

[@MikeGDetailing]

Mohs will have the longest durability but it is a fluoro modified polysilazanes and not SiO2. Pure is an SiO2 coating.

[@kylefraser4280]

I plan on doing my first true ceramic in the spring to my black Camaro. I was thinking using cquartz UK 3.0 but now will have to consider this! Quick question: I ordered some of Adam's graphene ceramic advanced spray coating on black Friday. Would this be good to use as a topper every 6 months or so? I doddnt understand if you said you used it on the windows or not, or if you were talking about a different product. I would most likely like to use this on the windows as well, or do you have better recommendation for glass. You also said this was good for light color cars...wouldnt it be good on a black or dark colored cars just the same?

[@MikeGDetailing]

Cquartz UK 3.0 is a great option. But Pure Evo is placed to compete with it and the pricing is very similar. If you like that candy gloss look then this is going to look great in any color. It will give the effect that the car was dipped in glass. Cquartz UK 3.0 will darken the paint a bit so it gives more of that crisp look. With regards to the Adams spray coating, you most certainly can use it on the glass. I didn’t use it on this SUV but I have it on mine on one piece of glass. The benefit is you can apply it as often as you like. Since you already have it, I would just use it on the glass. The Adams Graphene spray coating can also be used as a topper every 6 months or yearly without any issues.

[@kylefraser4280]

So your saying use the Adam's instead of a true ceramic coat on the windows?

[@MikeGDetailing]

@@kylefraser4280 yup you can use it on glass since you already have it. It may not last as long on the front depending on how often the wipers are used. But it is simple to put another coat of it when you need it.

[@mutatedgenome]

Have you applied any other ceramic/graphene coating? Any you like better than this so far? I have a silver vehicle and want something that will make it pop the best.

[@MikeGDetailing]

I have used many different coatings from ceramic to graphene to TiO2. Silver is one of the hardest color to get that wow factor. White is even harder. I own both colors. My silver car has P&S Legend topped with P&S Sole and it looks great. But the majority of the look came from the polishing step which was the Dr, Beasley's Nano Surface Primer NSP 95. A primer polish will add more gloss due to the ceramic layer it is leaving behind. The coating used will be the icing on the cake. The thing also with silver is that it does not matter what coating is used on it as there will be almost no way to tell a difference between them. I would look into a product like Gyeon Pure Evo, Cquartz SiC, 22ple HPC, P&S Legend, Adams Graphene. Cquartz UK 3.0 would be a good option as well.

[@뿌에에에엑]

hello! does gyeon primer helps increasing gloss before coating application?

[@MikeGDetailing]

Yea it does. It’s a good polish.

[@뿌에에에엑]

@@MikeGDetailing Thanks, and you better like NSP95?

[@MikeGDetailing]

@@뿌에에에엑 yes I do. It has more correction and a glossier finish. Also no need for a panel wipe. Gyeon Primer needs 8-12 hours to not need a panel wipe. Still a good polish.

[@ericrobinson284]

Can you use pure on chrome on your car?

[@MikeGDetailing]

Sure you can.

[@ericrobinson284]

@@MikeGDetailing thx for quick response great videos btw - I decided to go with Pure on my old school once its done being repainted next month so cant wait to apply to see how Pure looks on it

[@MikeGDetailing]

@@ericrobinson284 you will like the coating. It has a great look to it.

[@justinvoecks7253]

I know this video is a recent but I wanted to do this exact coating on a customer car. Reliability rating is 3 years but how is a holding up so far? Any signs of it not being able to last as long as gyeon states? Have used different ceramics but was wanting to try the new version of this out. (Heard the previous was not good)

[@MikeGDetailing]

I have not seen the actual coatings behavior. My brother just tells me it is on the paint as he washes it himself. I can’t answer durability questions as they are too new. Trying the Evo versions is a leap of faith at this point. From what I have seen from Pure Evo on the wheel is that it is doing fine at 2 months in.

[@justinvoecks7253]

@@MikeGDetailing Thanks for the reply and I suppose I'll just grab a bottle and put it on a junk panel for now. Curiosity is killing me lol. I really like the way this coating looks. Love the candy look on cars.

[@itsClarks]

Hi, can this be used on matte paint?

[@MikeGDetailing]

I would look into the dedicated matte coating. I will ask the Gyeon rep and get back to you just to make sure.

[@itsClarks]

@@MikeGDetailing Ta. The car I have is a GLA45 designo 2015 model, if that helps identify the kind of paint I’m referring to. Cheers mate

[@MikeGDetailing]

@@itsClarks I received an answer to your question. Yes Pure Evo can be used on matte surfaces but it will add a sheen to the surface. Mohs will add less of a sheen. The matte specific coating is recommended to maintain a true matte appearance.

[@itsClarks]

@@MikeGDetailing I will carry on as I was then. My car has already got some kind of a sheen to it anyway. It’s just that as I’ve been reading up on the paint used on my car, I believe there’s different mountain greys manufactured.

[@achillesus7]

Do instructions contain the PH resistance range for the coating? What is it?

[@MikeGDetailing]

It does not. I do not have that information.

[@MikeGDetailing]

Per the Gyeon website pH Tolerance 2-11

[@rover1374]

Sorry for the accidental dislike! Thanks for the video!