NEW Hobbywing Axe R3 on 4s with a 38lb 6x6x6

Its right here www.hobbywingd...
These are my Affiliate links, they really do help the channel if you use them, Thank you
AMain bit.ly/2RsdBVl Amazon amzn.to/49fwQnL Horizon bit.ly/4b8l0xr Tower Hobbies bit.ly/3HyQijk
Exocaged RC exocagedrc.com/
Radiolink RC8x
Amazon amzn.to/3TzFE31
Flysky GT5
Amazon amzn.to/48qfPH4
If you would like support Exocaged RC Directly, consider being a channel member. Cheap monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. Take a look! / @exocagedrc

[@bbeckers24]

That thing is a beast.

[@old-rcplane-phart]

FINALLY!!! I got internet back! Went off around midnight. Because: "it's working fine, but needs 'maintenance'🤦‍♀️"!🤷‍♂️

[@basilrehmann2631]

yehaw, a joint after work and watching you is the best (also just came back home from a 2km trip with my scx6 stock)

[@Addicted_2RC]

That system looks so small in there but wow that's pretty impressive. I think I'm going to have to order both systems tomorrow from my local hobby shop. Looking forward to more videos with this system. 6s very soon I hope 🤞🤞👊👊👍👍

[@markvasseur961]

😮😮 Joe, I don't know how I miss you workin on this freakin beast of a truck but now o have to go back and see the rest I missed

[@needlejuse1113]

Awesome❤

[@rc-daily]

This makes me want an scx6 so bad

[@old-rcplane-phart]

Like I always tell myself, can't take it with ya & nobody else deserves it!

[@rc-daily]

@@old-rcplane-phart that's a fact! Just have to find an extra thousand bucks somewhere!

[@apocalypsezombyRC]

Dude thats awesome!!

[@markcole6475]

Sweet rig….heavy hitter for sure! Imo I’d put a long flat bed on it to make it look like a hauler….just to finish the look.😊

[@boduke9428]

I thought hobbywing said they designed this combo with the SCX6 in mind? It even says 1/8 & 1/6 scale. Can I still pull my kiddos around in their stroller that's made to be pulled behind a bicycle? Currently is no problem even in high gear with the stock system. Total weight is right at 100 pounds kiddos pulls trailer.

[@keldonator]

I'll be putting this to the test soon I think lol

[@meirdeaph]

! Awesome 💯🤸‍♂️👍

[@toolbaggers]

6s with smaller gears can be re efficient than 4s thus a smaller mAh battery is needed.

[@Bhase425]

I'm going to try to put one of those systems in my little scx10 II honcho because I love power torque and growing through water frome Time to time over kill I know but that is why I am going to try all the torque and super controllability r3 axe 4274 motor and esc

[@user-tt9xt7gs2b]

this motor is physically too large for a 1:10 scale RC

[@Bhase425]

@@user-tt9xt7gs2b not if I have something to say about it sure, it's going to require some modification most likely but I'm sure I can make it work and plus The transmission mount is is already big enough

[@code3mobiledetailing190]

I subbed after this video. Is that an SCX Honcho? I have one and would definitely be interested in doing this build

[@boduke9428]

Yep. Vitavon sells the compete kit. I wanna say it's right at $2000. The back axle section can be easily removed if you ever wanna 4 wheel again

[@code3mobiledetailing190]

@boduke9428 what's the kit called also, is it difficult to install myself I have 3 RC but they are RTR so I'm not too familiar with esc transmitters and 8s 6s or 3s. I tried putting a 6s battery in my Axial SXC Honcho and it didn't move just the lights turned on. So I bought a 200 4s battery and it worked. Annoying 😑

[@boduke9428]

​@@code3mobiledetailing190it's the 6x6 kit for the SCX6. there is a few videos here of Exo doing the install on his rig. 3s, 4s, 6s and so on just refer to the battery voltage and the voltage the esc and motor are made to run on. The SCX6 is made to run on 3s but I've ran mine on 4s for a year without an issue.

[@code3mobiledetailing190]

@boduke9428 thank you. I will embark on the mission.

[@boduke9428]

@@code3mobiledetailing190 no problem. Hardest part gotta be clicking the buy now button on that $2000 total.

[@CM-ig2pf]

😊😁😎✌️ impressive setup!

[@laserbeam1620]

The Puller Pro is good for 39lbs! Try that motor

[@keldonator]

You should make a scx6 8x8 by putting two of those vitavon rear ends together 👍😁

[@ThomasManiscalco-cb9fl]

Send it off a junp

[@ohnoadventures]

👍👍😁

[@kippertheman]

That weighs as much as my udr lol (literally everything metal) the only thing plastic is the interior

[@Robloxmarty24]

My hobby wing axe r2 3s pulled 130 pounds so 38 pounds is nothing to a 4s