New Mold MUST SEE! From Ngraves bait molds. 3" Helter Smelter

[@ChrisSenerchia]

Oh man this is awesome Ironically I have contacted him today and mailed him a bait i made up to become a injection mold!! So happy to see this Thank you for making this video

[@five.0custombaits]

You will not be disappointed. Great guy and he went above and beyond for me. I am a picky guy about baits and he was awesome. Thanks for watching!

[@stevegriffin901]

Man Toby … love your content because your honest about what your talking about and your just you.. no front … no act… just you … and that mold is awesome!!!

[@five.0custombaits]

I greatly appreciate that! Gotta be upfront and honest. Thanks for watching! 🙏

[@bradwise7698]

30 seconds into this video I ordered one of these molds. Been looking for a small minnow bait with eyes and look what I found. Big fan of your channel.

[@five.0custombaits]

Thanks so much! You'll be happy with it I believe. Thanks for watching!

[@N2TW_customlures]

That’s gonna be money on a drop shot 💰 I also love being able to add eyes to finesse baits

[@five.0custombaits]

Yes sir! Drop shot candy!!!!!

[@pawpaw5717]

Thanks for the new site. Momma may think I need another mold like a hole in the head, but @ 73 bringin ' it. Good luck with the quackers.

[@five.0custombaits]

You can never have enough molds 😂. Thanks and thanks for watching!

[@jimk4267]

Very nice! They have some great looking molds. Thanks

[@five.0custombaits]

Yes they do. Surprised me how good they shot. Thanks for watching! 🙏

[@AddictedAngler]

most deffinatly i have to get this one , thanks for sharing

[@five.0custombaits]

Thanks for watching and subscribing! Welcome to my channel and I am currently watching your videos. Great content. It has been a great mold for me so far.

[@ryanhooksem1595]

Very sweet looking bait!! The walleye would chew them up here in Canada I'm going to have to get me one asap

[@five.0custombaits]

Thank you! I'm quite sure they will chew on it! Thanks for watching!

[@dkdavek2513]

Subscribed to your channel and ordered the mold today.

[@five.0custombaits]

Thanks for subscribing and welcome!!!

[@NWanglerzCHOICE]

Thank you so much! I’ve been on the search for a certain mold and everyone made it either too this or not long enough.. he made exactly what I was looking for! Depending on how I like it when I receive it, I’ll definitely be purchasing a ton more from him. 🙏🏼🙌🏼💥

[@five.0custombaits]

Just wanted to share what he made. It was a great product especially for the price. I already have more in mind I am gonna get done 😂. You can never have enough molds 😂

[@NWanglerzCHOICE]

@@five.0custombaits purchased one early and had to go back and get that helter lol

[@five.0custombaits]

@@NWanglerzCHOICE It's gonna be 💰💰💰! Several ways to fish it and natural size. Thanks for watching and Merry Christmas!

[@kickerwormz3262]

It looks a lot like my custom Silverside Minnow mold. It's the same type of profile. By no means is it a copy. Great profile! I have a 3.25" and a 3.75" The best thing to do with these little baits is to nose hook them with a small mosquito hook on 4 to 6lb test. Hang on!!! The bite is dumb on these little baits. When my fishing buddy is gaining on me, I turn to these little baits, and win.

[@five.0custombaits]

Those are great sizes. I may have to order some of the 3.75. I like that size in this style bait. Like I said in the video, every bait has been made 100's of times. This one will be very close to many baits in this style. Went with a tail that I haven't seen. Thanks!

[@clintjenkins13]

Digging the baits! Went and checked them out. I’m impressed! I’m liking the speed crawl

[@five.0custombaits]

There's a couple I want. Was so happy to get a few of the details put in the style I wanted. Thanks for watching!

[@clintjenkins13]

@@five.0custombaits Definitely budget friendly as well! I understand the cost of aluminum and machine time but I can work with this!

[@five.0custombaits]

@@clintjenkins13 Exactly! For me and my buddies. This will fish as well as my $1200 mold. I will be doing more business with him

[@clintjenkins13]

@@five.0custombaits I have been looking for a mold to be kind of like the divine swim baits from 6th sense. His Slicker mold looks pretty close!

[@five.0custombaits]

@@clintjenkins13 Will have to check it out. Thanks

[@newmexicooutdooractivities9826]

I have two of the fluke stingers and a 5 inch stic-o . You are correct, they do great on the laminate as well as a solid. If you put the bolts in, it’s a pain getting the molds apart, so I took them out and clamp as well. Can’t beat the prices either. I can shoot about 4 straight shots then give them a 5 minute rest. I’ve been impressed with them.

[@five.0custombaits]

Thank you for watching! Seemed like a lot of screws, I was so happy ot worked clamping together. For the price, I am very happy

[@newmexicooutdooractivities9826]

@@five.0custombaits have fun on your duck hunt.

[@five.0custombaits]

@@newmexicooutdooractivities9826 Thank you! We just arrived in Louisiana and hopefully on them in the morning!!!

[@AlexBascue]

I gotta buy some of these asap

[@five.0custombaits]

Hit me up. Email is [e-mail]

[@Handtiedbaits]

Very good stuff and those are gonna get smoked. Thanks for sharing.

[@five.0custombaits]

Thanks for watching! I agree, they will be 💰

[@stevefuhrman1799]

I found the website thank you much 😅

[@five.0custombaits]

Anytime. Thanks again for watching

[@CTCLures]

That plastic is good for running a small but reasonable amount.of lures and heat. But they will scorch and spall and get brittle

[@five.0custombaits]

I will see how long it holds up. Just got it in and happy so far. I hope to get a reasonable amount out of them. The high temp resin should last longer than a silicone type mold

[@BobbyOfEarth]

That's a bait that I need to get get! The 3" bait looks like the perfect Carolina-rig bait for Pompano, Redtail and Barred surf perch. Where can we get them?

[@five.0custombaits]

You can contact me at five.0custombaits.com or my other social medias and message me

[@stevefuhrman1799]

Last night I tried to go to his website and I typed it in and a message come up can't find no results something like that and I type it in the way you have it in your title I want to order a couple of

[@five.0custombaits]

ngraves.com is the website. I just typed it in and it went to his website. Double check the spelling and if you still have problems finding it let me know and I will see if I can help

[@stevefuhrman1799]

Thanks man

[@kickerwormz3262]

Can you air clamp these with your aluminum molds at the same time? Will using chill plates hurt the mold? Meaning, going from a hot mold and dumping chilled water thru the chill plates.

[@five.0custombaits]

I haven't tried to clamp to aluminum molds yet. I do not have an air vice or cooling plates. You will have to ask Mr. Graves about those things. Thanks for watching.

[@five.0custombaits]

I haven't tried to clamp to aluminum molds yet. I do not have an air vice or cooling plates. You will have to ask Mr. Graves about those things. Thanks for watching.

[@chrishyman8704]

Dont see the 4" on his site is that gonna be available?

[@five.0custombaits]

He is working on the design now. Hope in a week or two. It should be fire when he puts his touches on it. Thanks!

[@jammietruelove3988]

Dude you sold this mold.. I bet his website crashed.. one question does the bait have a dull finish? A lot of these kinds of molds the baits have a really dull look

[@five.0custombaits]

The finish is shiny. I expected a dull finish. These baits were all shot in that mold. Thanks for watching!

[@binkwood]

Where are you purchasing Calhoun plastisol?

[@five.0custombaits]

Primal plastix

[@sho95100]

@@five.0custombaitscould you provide a link?

[@five.0custombaits]

@@sho95100 ngraves.com Ngraves bait molds

[@sho95100]

@@five.0custombaits I was referring to the Calhoun plastic

[@five.0custombaits]

@@sho95100 My apologies. Where I was getting it before is no longer a distributor. I have heard that Fat Guys Fishing is now selling Calhoun's. I have now switched over to Dead On plastics

[@empireoutdoors1534]

What size eyes does the 3 inch helter smelter require?

[@five.0custombaits]

4mm eyes for the 3 inch 5mm eyes for the 4 inch

[@empireoutdoors1534]

@@five.0custombaits hey thanks a lot. I just picked up the mold and find any information about the eyes

[@five.0custombaits]

@@empireoutdoors1534 The bait is 🔥

[@fishingmaster99]

How can i buy the baits not the mold?

[@five.0custombaits]

You can email me at [e-mail] or message my social media pagee

[@davidraguse2106]

is it available in a 4" ?

[@five.0custombaits]

@@davidraguse2106 It is available in a 4 inch. Thanks for watching! 🙏

[@grimtasticbaits]

You are promoting a bunch of copy cats that infringe on other people’s ideas. Shameful.

[@five.0custombaits]

I appreciate your opinion. Whether I agree with it or not. Thanks for watching and have a great day!

[@ChrisSenerchia]

Oh man this is awesome Ironically I have contacted him today and mailed him a bait i made up to become a injection mold!! So happy to see this Thank you for making this video

[@five.0custombaits]

You will be happy with the results. He is great to deal with and the product is great. Thanks for watching!