New motor for the 14ft mud boat!!

[@JustinDeckardFamilyMan]

If u don't watch go cart motors getting put on a boat or a boat motor being put on a gocart what are u doing with your weekend lol

[@k.r.f.j.b.8144]

what are you doing with your whole life?!?!?! Lol😂

[@saratj1]

Hell yeah brother

[@Abcs13]

Hands down the cleanest set up I’ve seen. Keep posting bubba.

[@wayneeck9805]

My favorite video on surface drives, so far! I like this design the best! Indeed!

[@davidfuller5259]

SWEET RIG !!!, Not to mention the AWESOME !!! job you did on the camo

[@reelislandboyzoutdoorz]

Dope video, that motor is definitely something I need with the weeds and Lilly pads here.

[@Feedthelibertytree]

Great job on the boat and the surface drive set up. Can you add the builder of the Surface drive in the description please.

[@sawyerwallace9631]

Looks like a mud walker

[@seandonnaturley5832]

Awesome set up!! I need just that for our shallow river. One suggestion...at the end of video it looks like you didnt have your dead man switch hooked to you...stay safe young man.

[@orionrizzuto6102]

What you should do is install a fuel pressure regulator and a return line to the gas tank.

[@Handirifle]

Fuel pump suggestion. Rig a micro switch to your throttle. Have the adjustment so the switch is open (off) at idle, and when the throttle is opened, it closes the switch and turns off the fuel pump, letting the engines vacuum pump keep the motor going at idle. Cool idea overall, love that setup.

[@thebrowncompound]

Smart idea but she’s sold thanks for watching brotha

[@samlenthall5803]

Did you build the entire outboard or did everything g come as one like say a mud buddy? If so where did you buy it from? What a awesome set up

[@stevenflores8607]

How much would that setup be all together. Not the boat but just the motor and surface drive attached?

[@thebrowncompound]

The motor was used $800 the surface drive I paid $4,800 for and the dude stopped making that smaller one couple years before I bought that exact one. He made it for his brother. Brother had a stroke then he hung it in the rafters of his shop eventually putting on fb that’s when I got it. But the guy wasn’t nice too me whatsoever so I peeled the sticker off and don’t speak on his name. Was a badass unit but over priced and the dude was a a$$hole

[@stevenflores8607]

@ I didn’t know the surface drives were that much. That’s crazy.

[@thebrowncompound]

@ yessir that was a mini version for 22hp but it was top of the line with electric trim and all wasn’t Thailand crap the dude made the stuff in his backyard chromoly shaft and all. But the next step up, which that’s the only 22 hp I’ve ever seen set up like that. People usually have 40 hp plus. And the surface drives are much bigger but they go for about 8000.

[@charlesgraham9954]

i gotta 16' by 56" at the beam flatbottom Lake Raider. i can do 33 miles an hour with just me in the boat. i modified a bigger prop, the blades are about 3/4" longer. oh, 420 Harber Freight engine. boats a 95 that i got for free because it leaks all over, i just welded all the holes up and jimmied me an engine on it, also had to make a homemade trailer for it. fish dont care how fancy your boat is. thnx for the vid, and the time it took to make it.

[@texasplumr]

I have a 1436 and removed the benches. Built an aluminum deck up front that extends back half way to the second bench. Half of that got pour foam and tubes to store rods. The rest is storage. My deep cycle battery for cranking lives up there to help with weight distribution and if I ever opt for a remote fuel tank I'll keep the gas tank up there too. I have plenty of room, even with life vests and my anchor there. I also use 2 kayak batteries for my fish finder and trolling motor. If you can find a way to keep that cranking battery and fuel tank up front, you might like it better. But as it is, I love the way you have it set up! We all have different needs in our boats and I'm only mentioning mine because of Chris Brumley's comment about the fuel tank. Weight distribution is a big concern in these tiny boats. And like others, I'm interested in that kit too. I may build my own if I can find a set of plans that I like.

[@NastyNate-fn6od]

Do you have a pic or video of your set up? I’d like to see yours.

[@tazzthamenace1657]

How can you extend the battery cables to the motor want to run it to the front for weight distribution

[@joshtanner9389]

Can you leave a link on who made your surface drive? Also what size boat is that

[@baileymyers7479]

MudWalker Mud Motors

[@joearokis8265]

You might look into putting a switch that turns your fuel pump on when you turn the throttle to a certain point, similar to a nitrous switch.

[@ericbest9562]

That's what I was thinking or at least put a toggle switch on the handle. Maybe an electric brake light switch that you find on little bikes that don't have hydraulic brakes

[@0..ac..0]

What your boat rated for HP wise. I just bought a 14ft from my uncle. He redid the transom. It’s rated for 20

[@thebrowncompound]

Pretty sure I did three-quarter marine plywood I would probably stop around 30 hp most of them are all different, especially after somebody restores…

[@JupiterSkie]

Will the mud motor work on gravel or rock bottoms like in the Ozarks? How shallow will it go?

[@randystrickland1727]

Did trim come it or you modified it yourself

[@rsxek]

Sweet rig. Where did you purchase that motor setup.

[@38possum]

What brand surface drive do you have? Can't find it anywhere i Google!

[@riderhaddock3116]

Who is the guy who makes the surface drives? Interested in buying one from him

[@afdfireman217]

Who made the kit?

[@leozagara2150]

What did it cost you to put motor together.. by the way Great Vid..😊

[@thebrowncompound]

About 5k honestly

[@claytonburch5181]

would love to get some more info on the mud motor

[@survivalgoldhunter]

That things bad ass.... I want one for my 12ft john. I know what I'm doing this winter. Easy build.

[@chucksmith5002]

Nice setup. I have Two 1- 16 x 36 w/ 27hp Go-devil long tail 1- 14 x 40 Custom built w/ 23hp Vanguard Copperhead Surface Drive. Trying to see which one I`m going to keep as soon as Briggs starts to making motors to sell been on waiting list for 2 months. Enjoyed the Demo

[@luisgarza2203]

Where did you get the surface drive? I got the motor already..

[@mkfizzle]

Who makes the surface drive and how much need one.

[@baileymyers7479]

Black creek mud motors. Aka mudwalker

[@nandomancinas2563]

Who makes the surface drive?

[@denrizza]

All that needs is a forward/neutral/reverse type gear box and that would be awesome, IMHO.

[@ChaystonCrawford]

What brand of surface drive is that and what size motor you running on it?

[@Mangrum.august]

Hey man I found out about you from your last video, please keep uploading frequently. You have quickly became one of my favorite KZbin to watch!

[@xandereel3273]

I agree

[@glennbolt2139]

That is the kinda boat I would love to own. I would be on the river everyday if you don't mind my asking about how much do you have invested in it.And one more thing when can you take me out for a run in that bad ass boat.

[@mattbrown5511]

You have a great name young man. Happy boating from south Mississippi.

[@gavincosper5637]

Is this a 14/36?

[@michaelhabada3493]

Who builds that surface drive??

[@pharris1015]

How do these motors do in shallow rocky water? i dont have any bud where im from. Just rock

[@garrettbraswell7165]

who makes that surface drive kit

[@squishycafe1094]

I live in Melbourne Fl...Do you have the name, or website for the surface drive kit out of Jacksonville?

[@ajolson2199]

You got the contact info for the guy who built it and how much it costs? Looking to upgrade!

[@chrismuncey3861]

I would be curious what that thing could do with some upgrades cam Springs larger slide type carburger port work ect.

[@everydaybassin7522]

I made one myself how did you do the electric trim?

[@Jacob-gt1ks]

Is there a certain size mud motor you put on a John boat or can you just put one on? Want to put one on my express flat bottom but some say I need Jack plate or they say it won’t plane out cause not made for the boat

[@chevyon37s]

Whoever told you, that you need a jack plate for a surface drive and that they don’t plane out sounds like a real idiot. Or they had/have one that is not set up for their boat, and load their boat improperly. Jack plates are to raise up outboard engines on the hull so that you can run more shallow or correct for short transom. A mud motor needs to plane out so that you can run more shallow. You can put a mud motor on your boat. Just make sure you get a mud motor made to work for your transom height. So the “size” of the mud motor you’d get depends on the size of your boat. Obviously you’re not going to put a 35-40hp surface drive on a 14ft boat, just the same you wouldn’t put a 20-25hp one on a 17’ hull.

[@MichaelFriday-tg1ur]

What brand of surface drive is that ?

[@chrisbrumley9400]

Did you buy just the frame and throw the predator on it? If so what frame is that?

[@justinluper2349]

Can you explain or show how your electric trim is set up?

[@brodycampbell2990]

How did you get that to fit on such a small boat without having rear float issues?

[@thebrowncompound]

Not as heavy as it looks

[@brodycampbell2990]

@@thebrowncompound 👍🏻

[@Xzavier-26]

What kind of motor is on the boat? Does the guy you bought it from have a website?

[@thebrowncompound]

The motor is a 420 predator

[@mrsk8terforlife11]

Did you have to reinforce the transom ?

[@JabraunDeal]

Who did the surface drive?

[@brodycanaday2989]

Who built the tail? What all done to Motor

[@dylanaguiluz6246]

Would you happen to know what surface drive that is?

[@joeywallace6708]

I’d like to know the same. I have a 1436 and want to put this motor and surface drive on it.

[@MattMorris481]

Is this the Withlacoochee river?

[@kymwheelock9022]

You said you got the motor from a guy in Jacksonville what kind of kit is it does he make himself or I'm looking for one smaller for a 12 ft

[@NervousNick]

How many HP is that Motor?

[@BallingAllOverYou]

What size is the boat and how tall is the transom

[@jasonmartin5955]

Who makes the surface drive you and how much

[@baileymyers7479]

Black creek mud motors. Aka mudwalker

[@shapezula]

Coolest one I’ve seen yet.

[@joekelly9024]

Do you have another channel you post on?

[@thebrowncompound]

No sir more to come on here been dealing with a lot KZbin is going to be the main focus here soon

[@joshchoate-xg3ih]

Where did u buy that motor. I’m building a 14’ mud boat

[@ryananderson3425]

Do you have contact info for the guy that makes that surface drive setup?

[@thebrowncompound]

No sir

[@baileymyers7479]

Black creek mud motors. Aka mudwalker.

[@cannonpowell8011]

Did you have to build are you get already built

[@stealthwalker007]

Where are you running? What river

[@Korey_burch]

Who makes the surface drive? And what’s done to the motor

[@zoomzoom3909]

Where do ya get the surface drive setup?

[@jackbolyard1050]

Who makes that surface drive curious

[@georgiaboy888]

Where did u get the tail from

[@gjsfishing383]

Do you think grab bars are that important cause I have a 14 foot wide and I am getting a 23 hp copper head should I get a grab bar?

[@thebrowncompound]

Width? An longtail 100% surface drive maybe depending on electric trim or not

[@gjsfishing383]

@@thebrowncompound nah no electric trim

[@tactical_t-rex]

Where can I get one like this? I’ve got a 1236 Jon Boat. Im up in Canada

[@wildliferanch3665]

That gator glide is the bomb!

[@NastyNate-fn6od]

Can you leave a link for the mods you did o your motor ? I’m trying to find the same exhaust

[@thebrowncompound]

Custom made

[@NastyNate-fn6od]

@@thebrowncompound is your boat a 14x36?

[@davessparetime83]

Replace the stock fuel pump with this Briggs & Stratton 808656 Fuel Pump. Much stronger then stock Predator pump. $18

[@swamp_rat_fla1126]

Clean rig. 👍🏻

[@kevinadamslll7971]

Nice boat and motor

[@NastyNate-fn6od]

Bro where can I buy that surface drive kit? If that guy makes them to sell I’m sure he will get a lot more business.

[@jaimecantu5387]

He bought it at mud walker mud motors in orange florida...your welcome!!!!!

[@joeywallace6708]

@@jaimecantu5387 thank you

[@GreggGiblin-sy5og]

​@@jaimecantu5387 You're *

[@lesabre1972]

it looks cool as hell

[@jamesgraham2901]

Who built that kit??

[@xandereel3273]

Man I love the videos keep up the good work.!

[@DBD801]

What part of wekiva River? Apopka side or lake Mary side?

[@thebrowncompound]

Wekiva island is where I put in so Apopka I didn’t know it ran into lake Mary?

[@DBD801]

@@thebrowncompound gotcha I was referring to north side of the river or south side. I live over in howie my buddy’s got mud boats too we should get a big ol gang of boats out one day, be some fun shit

[@glee8892]

River only goes one way to St. John’s

[@hammerhalters]

What brand motor is that?

[@LeviCurl-u5s]

How do I get this surface drive kit?

[@isaackirk1120]

What kinda speaker set up you got?

[@codyremington65]

Yo keep the videos coming. Good content brother 🤙🏼

[@glee8892]

What river is that?

[@felipeperez9708]

Looking to buy a surface drive. Any info on where you got yours?

[@baileymyers7479]

MudWalker mud motors. Mike is a great guy.

[@bubbadodge07]

What is the shallowest water you can run this in?

[@thebrowncompound]

Ankle deep

[@jeffconley6366]

Who makes the kit? Please add to description.

[@XbenX0101]

We need an update on the 13ft ripper.

[@thebrowncompound]

Coming up in the near future

[@ZombieBiden]

Surface drive with a Harley motor would be cool

[@clayton203]

What kind of rpm’s when your running up on plane, any upgrades besides exhaust

[@shaunechoudhari]

Who's your guy in Jax? I live pretty close to Jax as well?

[@jokerperformanceracingjpr7495]

how much was the new surface drive

[@OutdoorsWithBink]

I know this is old but how much did you pay for the motor?

[@tannerdepury8563]

Is there a link or a comment for the mud motor kit?

[@jamessnowden7435]

How much total u got invested in this build 🤔

[@axeslinger013]

Wow, sounds like my old V-W bus....

[@fatbackcrowe2448]

Where did you get the drive system?

[@coltenboyer9414]

Do you have any ifo on who to contact for one of these motors?

[@Abcs13]

Where the videos at been waiting for another boat rip vid

[@robertestes3826]

How much does the that short tell cost

[@whiskeybravoTX]

why not plug the buy who built it in jacksonville?

[@thebrowncompound]

Well, because he told me not to, and we didn’t really get along I had a full video of his entire shop and everything. He said he didn’t care about my social media lol