Adding a list of the components in the description would be great. Your build looks sick!
@STKReactsАй бұрын
@@taggounet will add that right now!
@STKReactsАй бұрын
@@taggounet it’s done! Check it out! Thanks for the input
@barddole75673 күн бұрын
Did you plug the 3 pin pump connector to the pump fan or cpu fan
@STKReacts3 күн бұрын
@@barddole7567 cpu fan
@w9dkaАй бұрын
Thanks, just what I was looking for. Now I am confident enough to use Light Wings fans to match the rest of the BE QUIET Light Base 900 FX. The stock RGB looks awful from what I have seen so far on YT.
@STKReacts26 күн бұрын
Glad I could help!
@Hussar-fm8iyАй бұрын
How do you control the fan speed for the AIO ? Through L connect 3 ? So the pump is controlled by nzxt cam and the fan speed through L connect 3 ?
@STKReactsАй бұрын
No, I use NZXT cam to control the screen of the AIO and the pump speed, the fans i control through L Connect from lian li
@Hussar-fm8iyАй бұрын
@ I know that you can set up fan curve in bios or use the L connect software but this is not the right way. NZXT cam software doesn’t go by only cpu temp it also measures the liquid temps and adjusts the fan speed. I am looking for a y cable splitter that has rgb and power seperate. The problem is nzxt uses a proprietary all in one nzxt pin for power and rgb fans. Lian Li started using their proprietary all in one cable for their new fans for power and rgb but at least lian li sells a splitter. Thanks
@Hussar-fm8iyАй бұрын
@ With the old Kraken I was able to do it properly because the kraken AIO has seperate power and rgb split cable for the fans. Nzxt cam software control both fan speed and pump and rgb is controlled by L connect. Thank you for all the info. Very nice build 👍
@STKReactsАй бұрын
@ honestly, I set the pump to extreme and fans on an automatic curve. My temps are great 45-62
@Hussar-fm8iyАй бұрын
I subbed your channel, great build. I have last question about the L connect 3 😁. Does L connect 3 recognize 3 cooler fans as cpu fans or case fans ? Can you do a cpu fan curve in L connect 3 for the 3 AIO cooler fans like on nzxt cam or are you running them as case fans ? Tanks
@WheeledHamsterАй бұрын
Where do you connect the Lian Li fans that's on the radiator? Motherboard, the break out cables from the radiator, Lian Li controller or NZXT controller?
@STKReactsАй бұрын
Did you watch the video? lol I explain it all lmfao
@STKReactsАй бұрын
I use Lian Li controller for ALL the lian li fans, this AIO does not come with a controller...the aio is detected by nzxt cam through the cable that it comes with.........watch the entire video, the information is all there LOL hence the title of the video
@Yelkwood9Ай бұрын
i just ordered this one (kraken elite 360 2024) and put it in my rig bro and i didnt have a single fan brick i had 3 individual F120P's, weird. It was the black non-rbg model though. Still weird that the same model would vary in such a significant way. Everything else seems to be the same as mine though :) including the gigahuge pump
@STKReactsАй бұрын
IT IS MASSIVE LOL my gf called it a coffee mug
@cryytics273026 күн бұрын
Hey, can you send me a link of the reverse Lian li fans you bought? i've been trying to get ahold of them but i can't find them
@STKReacts26 күн бұрын
I bought them at microcenter...They are called Lian Li Infinity Fans reverse fan blades..I didnt buy them online
@tobiashasenburger45217 күн бұрын
Do i need to buy extra lian li cables to connect them to the aio or are they included by the fans?
@STKReacts7 күн бұрын
@@tobiashasenburger4521 you need to have your own lian li controller
@tobiashasenburger45217 күн бұрын
@STKReacts so when i buy the controller there is everything i need to have to connect them to the nzxt kraken elite?
@tobiashasenburger45217 күн бұрын
@STKReacts and sorry for asking that much but where can i buy the controller from? Could you send me a link or name me a Website please?
@STKReacts7 күн бұрын
@ I had the controller from a previous lian li Galahad 2 LCD.
@STKReacts7 күн бұрын
@ you’re not connecting ANYTHING to the kraken elite. All you’re doing is screwing on the Lian Li fans to the NZXT RADIATOR. You will connect all your lian li fans to your lian li controller and the mobo, then you will plug in your nzxt cables to mobo, they will be using 2 separate programs to control them separately
@WheeledHamsterАй бұрын
If you put the Lian Li fans on it, does CAM control the fans or L-Connect?
@STKReactsАй бұрын
L connect will control the fans. The only thing that CAM controls is the pump speed. Screwing on the fans doesn't do anything to NZXT.
@Erikhigh2Ай бұрын
It's my first time building a PC. What if I want to top-mount my radiator is that any more difficult? With this setup?
@STKReactsАй бұрын
@@Erikhigh2 it would not be possible if you have this case.
@moumax5721Ай бұрын
hey where did you get the white cables for the gpu pls ?
@STKReactsАй бұрын
@@moumax5721 they come with my power supply. The model is Lian Li Edge 1300w psu, it comes with cabled wires already and cable combs
@MrSauceNAtorАй бұрын
You mind sharing your lighting settings in L connect including hex code. Much appreciated.
@STKReactsАй бұрын
@@MrSauceNAtor I will when I get home
@MFN073Ай бұрын
how is the pump noise and your temps in idle and underload?
@STKReactsАй бұрын
There is almost no noise, idle temps with my 9800x3D are around 44
@shqiprimsadiku577Ай бұрын
whice case are you using here?
@STKReactsАй бұрын
@@shqiprimsadiku577 011 vision from Lian Li
@TheAtomicFle4Ай бұрын
Can you upload custom video clips to the screen?
@STKReactsАй бұрын
Yes check back tomorrow
@BimBo2212Ай бұрын
I'm a bit worried about the length for the usb connector, is this an issue? My 2 USB connectors are located at the bottom of my motherboard.
@STKReactsАй бұрын
Yes they are short. I would invest in an extension cable. I got lucky with my power supply.
@Ha_BuАй бұрын
may i ask you something? how do you setup your fans like that?
@STKReactsАй бұрын
I use L connect software from Lian Li.
@DawirdАй бұрын
How do you control your Tforce RAM rgbs? I have them but I have no control over their RGBs
@STKReactsАй бұрын
I control them using my gigabyte motherboard software
@DawirdАй бұрын
@@STKReacts it's so disgusting that I have to deal with this. I can't control it separately, I use Aura and it just won't let me.
@STKReactsАй бұрын
@@Dawird what motherboard are you using? I’ve found many people have issues with their RGB. Might need to do a video on that. It’s annoying for me because I have to use L Connect for my fans, Gigabyte for motherboard and ram, NZXT cam for AIO, and Armoury crate for my keyboard rgb lol I wish it was one click solution
@DawirdАй бұрын
@STKReacts my motherboard is Asus Prime B650 Plus
@STKReactsАй бұрын
@ make sure you’re using armoury crate and you sync your ram to be used through the software
@bellaredd5391Ай бұрын
Can u make the New 2024 NZXT 360 Elite edge to edge full screen?
@STKReactsАй бұрын
No it has a border unfortunately
@bellaredd5391Ай бұрын
@@STKReactsaww boo :( that sucks Thanks for letting me know, I have it I just haven’t build my pc yet lol
@STKReactsАй бұрын
@ it’s probably the best AIO screen out there. I have had the Galahad, corsair elite h150i, the previous nzxt kraken, and this one is beautiful
@ZeonTecАй бұрын
I'm reluctant to do close loop water cooling, I hear horror stories about them. Also, i hear the life expectancy on them only 5 years or so also if there is a slight leak then you will need a new system.. 🤔
@STKReactsАй бұрын
@@ZeonTec SAME! I am scared but it looks so good. I also upgrade WAY too much to do that lol
@TheWavyOne92Ай бұрын
I’ve had a kraken 280mm (now upgrading to this 360mm when it gets delivered in a few days) and I’ve had no problems since I’ve installed it back in like 2020.. cool temps and actually have the sl inf fans on them also. But I was the same way when I was originally buying the 280 cause it was also my first one. I say grab it if you want it . I think they look way better in builds than the fan coolers
@corellademoneyeАй бұрын
So sickkkk that screen is massive!!!
@STKReactsАй бұрын
Yeeeeee
@jefwootАй бұрын
Nice guide but U didn't show the wiring completely..
@kenny10497Ай бұрын
you should’ve put the rat behind the bracket and the fan in front of the bracket It would look much better.
@STKReactsАй бұрын
@@kenny10497 I’ll consider it, I’m going to go back into it today for some cable management
@waferzworldАй бұрын
Nice build!
@STKReactsАй бұрын
Thanks!
@MiamiJamrockSpiceАй бұрын
Just a suggestion, you built this channel on movie and TV reactions. I think you should create a different channel if you're going to do more of this kind of content. You're going to mess up your SEO and algorithm. Also, might lose subscribers. Probably best to keep this a reaction channel and if you want, then promote/suggest the other channel in your videos and on your profile.
@STKReactsАй бұрын
I’m honestly going to upload everything and anything. If some people don’t like it then I’m sorry but as you said, I built it. I love tech, gaming and movies and tv, so I’ll upload a bit of everything but mainly reactions. Thanks for your input tho, I get where you’re coming from
@MiamiJamrockSpiceАй бұрын
@@STKReacts That's fine. Not sure what your goal is with the channel. But if you're trying to build a brand or community, just know you'll be working against yourself (coming from someone with over 10 years of webmastering, SEO, and brand management).
@AK_1476Ай бұрын
@@MiamiJamrockSpice Think hes just trying to have fun and do youtube casually going off from his response to you