New Saylor Beall 5 HP 80 Gallon Air Compressor with Rapid Air Cooling Kit!

[@freddaniali]

I am one of the idiots that actually soldered the pipe together for my cooler/trap. Thanks for this video, you have a really nice setup!

[@Alabamaweldinginspector]

I have a Saylor Beall model 9000 on a 200 gallon tank . It is in excellent condition and I bought it for $1,299 at an auction. What a nice piece of equipment ! Best deal ever .

[@MrHowieZ1973]

Saylor Beall is the best air compressor in the world. I have three of them and looking for more. lol, That's some nice eye candy there. :)

[@ivanscountrymusicandcars2357]

They are eye candy.

[@obfuscated3090]

I just bought a couple of Saylor-Bealls one of which is forty years old and the other pretty close. Fantastic hardware.

[@clobbyhops]

Thanks brother, I was looking at getting a Quincy, but you have change my mind 🤩

[@SquareBodyK5]

Same here!

[@MannyFontes1968]

That's a nice setup you got there Tim. I was able to salvage an old 80 gal Ingersoll rand from my old job but it runs on 3 phase power so i'll have to come up with system to run it on single phase using capacitors.

[@timsworkshop85]

As long as the tank on that Ingersoll is solid that's a good score.

[@MannyFontes1968]

@@timsworkshop85 Yes it was because they wanted to put it in the scrap dumpster. Yeah, I was always the only one that would drain it every couple of days to keep water from building up in the tank.

[@chrisschultz6134]

I have a salorbeall compressor that I used for over 50 years, 6 and 7 days a week in a tire shop It still works like new I had to replace the motor 10 years ago I rate them number one.

[@Alabamaweldinginspector]

What model compressor was that ? I love the model 9000 . It’s slow turning and produces a lot of air .

[@obfuscated3090]

VFDs work too. I use them on my lathe and milling machine.

[@halfstep67]

Nice compressor, What did you pay? I have an American made Quincy QT-54 that is working well. It runs quiet and pumps out plenty of air. I was in the middle of a project when my old compressor bit the dust and needed a compressor quick. So I went with the Quincy since I could buy one locally. I do like the aftercooler on the SB. I am going to make one for my Quincy. I did put a magnetic motor starter on mine as well. I did a CNC milling machine conversion that uses some air. I am going to do a CNC lathe conversion next and some day I and going to make a plasma CNC.

[@treborterb]

This particular compressor was running just under $5,000.00 in May of 2022 for the performance package that is shown in this video from compressor world but I haven't looked at how much they are only 6 months later so they may be even more now.

[@treborterb]

So I just looked on the Compressor World website and it went up another $500.00 in the last 6 months...it's %5,500.00 now with free delivery...

[@treborterb]

I live in a rural area and have a 140 foot gravel driveway and had the lift gate service and they told me that they could only deliver it on the road because their liftgate service uses a regular pallet jack which will obviously not work on gravel...so keep in mind that the delivery company has to be able to get into a driveway with a potentially large truck...in my case a semi-truck. Try getting a 700# plus compressor down a 140 ft gravel driveway...wish someone would have explained the actual delivery process before hand.

[@EthielRodriguez]

Greetings and thank you for the video. I want to ask you , what breaker did you use 60 amps? and wire size for the compressor?

[@timsworkshop85]

I used a 10 gauge wire, and am using a 50 amp breaker.

[@stepheneggert7388]

I'm getting one vary soon..5 hp. Same for my home shop..tierd of big box store crap..American iron.. is what this company builds..my dad had one in the 1960s in his service station..same size..it ran 5 bay.s..and In ground car lifts..it lasted 30 yrs I recall..change the oil..once a yr..if your a weekend shop guy..ty for the video..I'm getting the pressure lube pump..with the option oil filter..on mine..

[@timsworkshop85]

Absolutely! If your going to get a tool, pay more up front but enjoy the benefits of a quality tool for a long time.

[@stepheneggert7388]

Update...I ordered my Saylor-beall air comprsoir. Late Feb from pacific aircompressors. In Portland, or.. seen your utube..video..liked yours. Spent some high change ..on mine..but I'm getting a 60 gal unit with the performance pkg..and ..ordered mine with an added.water filter past the after- cooler..# sbnf-0030 gp..befor air go,s into the tank..and a reddinton hour meter..so I can keep track of comprsoir maintenance. To change oil..as I seen on yours u have the upgraded pump vent..or crank case breather..# 8921..s.b. smart move..standard on the 707 pump..I did my homework..I do more car detailing then major repairs..,but wanted a quite running unit..ty.for your video...

[@Alabamaweldinginspector]

You should go back to school and learn proper English and learn how to spell .

[@ivanscountrymusicandcars2357]

Tired of big box store crap. That’s where I am at as well. Simply tired of big box store crap!

[@SquareBodyK5]

How do you get this model with the full package? It won't let me add anything but the different volts and the switch?

[@r.guardia9107]

Great video, shop and compressor. How did you get the compressor onto the rolling base? I would like to buy one, but not sure how to move it around once delivered by the lift gate

[@timsworkshop85]

I removed the gauge/switch on the top of the tank. Then I put a piece of square tubing underneath the motor/compressor mounting plate. Then, with my 2 ton HF shop crane and a strap, I attached to the square tubing and lifted it up. Hope this helps.

[@r.guardia9107]

Hi, yes your information is a great help👍 Keep up the great videos.

[@carlosbanuelos3471]

Do you know how far apart the compressors legs are? Have an order coming in soon and want to build a similar base

[@timsworkshop85]

The legs are about 25 inches across from each other.

[@michaelmusson3593]

very nice well thought out sustem

[@vaughnwesterby5162]

Made in the USA! 👍🏻🇺🇸

[@treborterb]

what are the black flex lines from the tank to the airlines and air lines to regulator and where do you get them?

[@timsworkshop85]

The black hose is 1/2 inch air hose, you should be able to get anywhere they sell air hose.

[@treborterb]

The continuous run feature is only available on the 15hp to 30hp models and not the 5 hp model that you have here.

[@spreaddeezhazelnutz7511]

Wrong. It comes standard on 15HP and up models. However, it's available as an option for lower HP models for over $500.

[@440gordy]

Doesnt it void the warranty not having it on the ground on rubber mounts?

[@timsworkshop85]

No.

[@noz455sd]

What vendor did you get it from?

[@timsworkshop85]

Compressor World

[@nharp83]

There is no match for Made in 🇺🇸. ☝️👍

[@maestrovso]

If you think it is all made in USA, you would be very surprised to find out most of the subcomponents are not. You can count on the tank drain timer, components in the magnetic switch, pressure switch, OP relief valve, and most likely the motor also made in China or Vietnam. If you want a true 100% USA made compressor, your best bet is to buy a 20 years old US made industrial compressor. For what it's worth, air compressor is not precision machine like your Hyundai. It is more crude than a Harley Davidson.

[@Alabamaweldinginspector]

Baldor motors are made in the United States . That’s why they are a quality motor and not a China piece of crap .

[@Alabamaweldinginspector]

Where are you from V son , China too !

[@Comm0ut]

HDs are simple, not crude, I'm a multibrand mechanic and owner of many decades and those words mean different things. Sanborn used to make durable compressor pumps (the key part of the system) but sold out to Coleman in 1994. The little stuff isn't a deal breaker. Those wanting pure all-American can buy the compressor pump from Saylor-Beall and self-install which of course isn't difficult. My used SBs will shortly share a custom skid.

[@justinpalmer9196]

Mine has an American made baldor moter. American made Saylor beall pump. American made Eaton mag switch and and American made hubbell pressure switch. American made Manchester tank and even the tank bushings are USA. I would agree on the Chinese tank drain

[@stephaneaudette6665]

Verry nice machine but don't freak with made in usa. You tell it 500 times and there is a lot of stuff are made in other contry and are better.... 🙄🙄 But with a nice compressor like that, it it nice to put a Asco red hat water drain.