You arent able to use the foglight functionality because you did not use the oem fog light connector. However, I did. I also did not route wires all to the trunk (OMG that would be a massive pain in th a-). I used the oem connector, bought T-connectors from amazon, and used the T connector to connect the yellow wire to each front camera on the inside of the wheel well (this way I didnt have to remove either camera). Ive had the same fog lights installed for about 6 months now, I have all functionality and zero wires inside my cars cabin 😎
@ShivaSapkota2 жыл бұрын
Thank you for your feedback. Yes, I have seen that kit and thought about the shorter route to just tap into the repeater camera but wanted to go with the longer route since many people get nervous about even the safe T connector tapping. I definitely think your method is much cleaner and efficient.
@RafalDelano2 жыл бұрын
@@ShivaSapkotaWell good work. Love your DIY and review videos. Keep up the good work!
@nicolasteslatuto2 жыл бұрын
Hello , great video ! I will install this kit but I want to keep my fog lights fonction . Have you got à like for the T kit ? Or even a video tutorial of it ? Thanks by advance
@olimexsys2 жыл бұрын
hello, thanks for the video, I also have those lights on my M3P 2021 but my installation was different, much simpler, I took the turn signal from the lights that are above the side cameras, it was very simple, now at night I always bring the fog lights, they also turn on when I unlock the doors with my FOB key. I really like your videos, you do a very good job with your Tesla, congratulations
@Nutsofamily Жыл бұрын
Standard range: purple to red and black to black. Yellow to repeater. That’s all u need!!!
@MalBackTalkingTesla2 жыл бұрын
Shiva I have now added the light, to my model 3 I used the alternative method of connecting it straight into the original wires that were connected to the original lights just swooping them over without running in the back lights and by connecting to the turn signal on the side repeaters green for left side yellow for right you don’t lose functionality of the fog button it works as it should, the yellow wire on the light is not long enough I was able to use a pice of the wire that came with the kit to make it work I have spoken to Hanshow who will look at extending these yellow wires on there lights this way it was much easier install with no loss off the fog button thanks for your great video it helped install and allow me to think outside the box to improve the experience.I will leave a link of your video with mine so people will be able to do booth methods
@Nutsofamily Жыл бұрын
Does NOT WORK properly on 2022 RWD. When engaging brakes the ambers both illuminate. I went through frustration with Hansshow explaining this. After back and forth they “say” they will make a new harness for me. No timeline for delivery….. I don’t have my hopes up. I’m glad you get al this free stuff but I wish it would work. Install, uninstall and re-hook up o factory harness and side repeater. Pain in the As?!
@MalBackTalkingTesla2 жыл бұрын
Shiva You always make it so easy great to see another successful reference video looking forward to the next project
@ShivaSapkota2 жыл бұрын
Thank you my friend. Hope all is well with you. Congratulations on your channel growth and best wishes! You are doing an amazing job.
@MalBackTalkingTesla2 жыл бұрын
@@ShivaSapkota thankyou so much you inspire me with each of your videos I have added v3 bracket video will be out in a few days let me know what you think
@chrismiles20002 жыл бұрын
I've bought lots of stuff for my model 3 because of your video's
@mincooper2 жыл бұрын
Looks like a good option for standard range cars without a factory fog light. For the LR and Performance versions it looks like you lose a true and proper fog light which in conditions of fog there would be a loss of this functionality. Also with such an invasive wiring need would there be a possible warranty issue if something in the lighting system had a problem?
@Redix92 жыл бұрын
Your getting way better with the instructional videos. One question I have is are the cables there to instal the fog light on a 2022 rwd base model? Is it the same process?
@ShivaSapkota2 жыл бұрын
Thank you very much for your kind words. I believe it is exactly the same process. I haven't heard anyone mentioned this specification changed on the 2022 models. So, this same kit should work.
@maloney7461 Жыл бұрын
Will Tesla install aftermarket parts for the owner? Will the lights void the Tesla warranty because, they are aftermarket parts?
@sherwinm Жыл бұрын
Thanks for the video. Can the light change color. In some parts it’s the clear white and during turn signals they are yellow?
@amitshah2905 Жыл бұрын
Hi Shiva … I was following your video and made one mistake and pulled the wire that goes from the side censor .. front ultrasonic censor .. any help as to where that wire is connected ?
@livingaboard2 жыл бұрын
I don't like the fact that you eliminate the front Amber side marker light with this upgrade. Or call it a running or parking light. With the upgrade all you have is a amber turn signal or it's off or it's a white fog light.
@icanbelievemyeyez46532 жыл бұрын
So much work for foglights! Was thinking of upgrading but dang.. lol Great video!🥳
@Nutsofamily Жыл бұрын
Why do the amber Lights come On with braking????
@Kennethstef2 жыл бұрын
Great install. I'm sure I'll be doing this soon too lol. Thanks Shiva!
@ShivaSapkota2 жыл бұрын
Awesome, thanks Ken!
@TeslaHo2 жыл бұрын
@@ShivaSapkota woo i hear that guy is cool
@alexkalpin15692 жыл бұрын
Hi Shiva Thank you for your hard work for us I have a question Could you please tell me Can you connect fog and bumper reflector lights to same Tesla tail light connector on back looks like they going to same tail connector Thank you
@ShivaSapkota2 жыл бұрын
Hi Alex, yes you can daisy chain these plugs together.
@alexkalpin15692 жыл бұрын
Thank you Shiva Is it one goes to another one? Or I have to make some mod For it
@alexkalpin15692 жыл бұрын
Thank you Shiva Is it one goes to another one? Or I have to make some mod For it
@ShivaSapkota2 жыл бұрын
@@alexkalpin1569 They are all the same plugs, no modifications required.
@alexkalpin15692 жыл бұрын
Ok thank you so much
@v2F1boy Жыл бұрын
Hi shiva i love your videos with complete step by step install. Quick question…..can this be installed to a standard range model 3? Thanks
@TongueJedi2 жыл бұрын
So if you already had fog lights and you have no use for the harness and you just plug directly while tapping into the side camera for the turn signals …the fog light icon and toggle will work as normal?
@mariagaribay52052 жыл бұрын
Great video as always Shiva and awesome looking lights!
@KrisTechYT2 жыл бұрын
Very unique looking lights! Congrats on 21K subs 🥳🥳🥳
@lester9230 Жыл бұрын
I like the oem look better
@resrevni2 жыл бұрын
How to delete headlamp turn signal and rely solely on the sequential fogs as turn signal?
@henrikfager55512 жыл бұрын
Thanks! Do you have any idea why these lights do not come with T-connectors for the head lights to get the turn signals? Also please update that it is possible to do an installation of working fogligths control (on/off) from the display.
@christopherlauren94572 жыл бұрын
Do your amber lights for the fog lights come on when the brakes are applied? I installed them and the ambers light up with the brake lights.
@knittwitt42 Жыл бұрын
Im having the same issue. Did you resolve yours? Thanks.
@TheRavsingh2 жыл бұрын
Are these brighter than the OEM fog lights ?
@brianredmond78912 жыл бұрын
Great video! Thanks so much.
@superscort572 жыл бұрын
looks good. great instructions.
@ShivaSapkota2 жыл бұрын
Thank you very much!!
@JuniorJr_232 жыл бұрын
Nice. no need to level the light?
@ShivaSapkota2 жыл бұрын
I don't believe so. Only the top ones can be leveled. Thank you.
@ianbladuell26942 жыл бұрын
Gonna come up to you and have you install them Shiva
@ShivaSapkota2 жыл бұрын
That sounds good. Please let me know in advance so I get my tools ready :)
@ianbladuell26942 жыл бұрын
@@ShivaSapkota will do. Thx. How long did it take you more or less from start to end?
@ShivaSapkota2 жыл бұрын
@@ianbladuell2694 It took me several hours but I had to record and go slow. I think generally it should not take more than two hours for the whole thing.
@ianbladuell26942 жыл бұрын
@@ShivaSapkota great. Thx for info
@HiThere6192 жыл бұрын
I wouldn’t mind them if they weren’t sequential. It looks stupid IMO having both a non-sequential light and sequential light flashing simultaneously just inches from one another.
@curiouspeople64412 жыл бұрын
Very kool
@cyprianskiba87682 жыл бұрын
Too crazy of an install
@ShivaSapkota2 жыл бұрын
Thanks for your feedback!
@ricric95212 жыл бұрын
Looks clunky. I would go for a LED bar.
@ShivaSapkota2 жыл бұрын
Thanks for the feedback. Yeah I have seen an LED bar solution somewhere, might show that mod in the future.
@jbmcdoogle2 жыл бұрын
Nope!
@ShivaSapkota2 жыл бұрын
Thanks for your feedback, John.
@tonytanti8138 Жыл бұрын
These look cheap as hell
@user-qu1cd3bu8q2 жыл бұрын
Son unos SEXBABY.Uno de los mejores conciertos ❤️ Son unos de los mejores conciertos, no puede ir pero de tan solo verlos desde pantalla 6, se que estuvos sorprendente...