I like that bag that you use to catch the water, I have never seen one anywhere. The pipe cleaner was also a nice tool.
@mmplumber29 күн бұрын
@@GWAYGWAY1 derblaue and techersltd for the cleaners 👊
@rampanttwattery484429 күн бұрын
Nice to see earth bonding reinstated/installed. So often this is missed as it’s “not my job” 👍
@mmplumber29 күн бұрын
@@rampanttwattery4844 yeah it comes with the unit 🤙🤙
@marshallguerra13535 ай бұрын
You make it look easy !!!!! Having the right tools makes all the difference.
@shaunyyoo60757 ай бұрын
It’s a 👍🏻 and a subscribe from me, I’ve been a commercial plumber/gas engineer for 20+ years and I enjoy someone taking pride in their work even on small jobs
@tracynation28206 ай бұрын
I love that mini press tool. 💙 T.E.N.
@nycsh00ter6 ай бұрын
Nice toys! I especially like the ratcheting crescent wrench. Nice find.
@nicholasphillips54066 ай бұрын
First vid I’ve seen of yours without pipe bending!
@jaffplumbs267 ай бұрын
Sorry if you have already said this but what drill pipe cleaner was that mate?
@thedudefella753 ай бұрын
I paused one of his videos and I saw it was a teachers one.
@9720miller3 ай бұрын
Techers
@_tmmy_7 ай бұрын
I fitted one of these full bore valves last month as my 80yo main stopcock had seized up. Personally I think they make a huge difference in terms of the flow rate as they are full bore and less likely to get gunked up unlike traditional stopcocks. Nice one!
@mmplumber7 ай бұрын
That’s my view on them mate! 👊👊
@johnwellbelove1487 ай бұрын
I cleaned up the decades old labyrinth of piping in our cupboard and replaced all stopcocks with full bore versions. It made a noticeable difference in pressure and flow rate. Our electric shower no long shuts off because of low pressure when the washing machine fills.
@zam10076 ай бұрын
@@johnwellbelove148any water hammer after the increase in pressure? 🤔
@johnwellbelove1486 ай бұрын
@@zam1007 There were no issues at all.
@sonacphotos6 ай бұрын
@@zam1007 Pressure doesn't increase will full bore. Only flow.
@nickhollyoak902311 күн бұрын
Nice bit of scrap there 😂
@dannywilkins8877 ай бұрын
You do some nice work bro, but I’m sure some won’t agree 😂
@mmplumber7 ай бұрын
Thanks dude really appreciate it!
@ginola6027 ай бұрын
Nice work !
@mmplumber7 ай бұрын
Thanks ginola!
@sorleymcsorley5558Ай бұрын
I'm a retired heating engineer and it would have taken twice the time to cut and install the different pipe lengths. ... Then i would've had to solder them before testing it. GG Belfast
@arek12027 ай бұрын
Nice work
@whitebear54056 ай бұрын
I'm not a plumber, why do you use marker pen on the pipes before clamping them?
@RussPawson3 ай бұрын
It just shows us that the pipe is all the way in the fittings.
@Christopher12345xy3 ай бұрын
You also have to do it for the manufacturer guarantee, if you have a problem with it they won’t guarantee if you’ve not marked the pipe for depth or if you haven’t de-burred then end of the pipe.
@whitebear54053 ай бұрын
@Christopher12345xy ah right okay. I think if I were to have a career in plumbing this peice of equipment would be super helpful. I'm guessing there are old school plumbers who might think its cheating, but with all things in life technology moves on. 👍
@jeffburton13264 ай бұрын
Not sure where this was done but here in the USA we don't use pipe dope on compression fittings. An inspector will make you replace the whole thing ... again.
@darransidney70Ай бұрын
You love your ratchet tools !
@Roblovesbushcraft7 ай бұрын
Another great vid mate, don't use press fit myself but looks a whole lot stress free. Can I just ask if you have a link for the rectangular plumbing tub that looks very useful. Cheers Rob.
@mmplumber7 ай бұрын
Yeah it has its places for sure! If you good derblaue folding tub you will find it. Plumbingforless has them in the uk
@Roblovesbushcraft7 ай бұрын
@@mmplumber Thankyou mate, appreciate.
@frankescobedo73466 ай бұрын
Nice work…😮😮 What kind of clamps are those…?? Thx…..👍🏻
@jamesforte-mason88496 ай бұрын
I love that pipe cleaner, i know people have asked but can you repeat please where you buy it
@garlic15586 ай бұрын
Hi Mate From where do you get these pipe clips? They look deeper than Talon ones Great job 👍
@pault37057 ай бұрын
Hi you did a short vid of wiring a immersion element the other day..any chance of a more detailed talk through of the subject inc the tools you used...thanks
@mmplumber7 ай бұрын
Hey I just used a knipex tool for cutting and stripping cable, then some crimps and crimper on Amazon 👊👌
@darrenboston3426 ай бұрын
Look at the state of those walls ffs!!🙄
@hernanmoreira54554 ай бұрын
Buenos días, cuál es el propósito de la pasta blanca? Es evidente que eres un profesional. 👍🏻
@pedromauricio73047 ай бұрын
Love your work bro What’s the size of that joker And what’s the name of that tool you use to remove the compression ring Pls and than you 💪🏾
@mmplumber7 ай бұрын
Joker xl for 15mm compression and that’s a Oliver cutter from monument
@mmplumber7 ай бұрын
Thanks for watching pal appreciate it trust
@ЮрийГагарин-у6э6 ай бұрын
Отличная работа! Подскажите пожалуйста название самозажимного ключа.
@markhoward57806 ай бұрын
Is the Novopress still your go to or would you recommend other brands as cant make my mind up which to chose
@royb2251Ай бұрын
Great vid , list the tools and make money 👍🏻
@thelikesofus3247 ай бұрын
im tempted to buy one of those wera joker wrenches. will the XXL do 15mm & 22mm compression fittings ?
@mmplumber7 ай бұрын
It will but it’s a big boy
@stevegeraghty6 ай бұрын
I got the xl and I don’t think my adjustable has seen the light of day since, the xxl is just too big for what I do
@thelikesofus3246 ай бұрын
@@stevegeraghty Yeah, the XXL is big but it does 15mm & 22mm compression fittings. I assume that you can only use the XL for 15mm compression fittings, can you confirm ?
@stevegeraghty6 ай бұрын
So the xl won’t do 22mm, I just use it on 15, if you have loads of space around the fitting the xxxl will work but you are never going to fit it underneath a bath or any tight space
@thelikesofus3246 ай бұрын
@@stevegeraghty Ok, thanks for the clarification.
@kamaldahal46727 ай бұрын
Nice job , how much to charge for job like that plz
@no-ic3rg7 ай бұрын
102 quid for a bucket I'd rather wait for it to evaporate
@kamaldahal46727 ай бұрын
I meant a whole job price !
@mmplumber7 ай бұрын
@@no-ic3rgit’s about 70 🤣
@mmplumber7 ай бұрын
3 hours work plus materials
@puzz23896 ай бұрын
Nice plumbing work! I do enjoy watching different tradesmen doing some decent quality workmanship, well done 👏🏻 👍🏻. I won’t talk about the main equipotential bonding though,(the green/yellow cables. (It’s not technically correct) 🫣😊
@ianwheeler7513Ай бұрын
I don't know where you're from, but the plumbers in the US and Canada must be pretty pissed at seeing there are better options for pipe clips/stays than the fugly crap they have.
@3D_PrintingАй бұрын
Old valve lasted many years one year for a new valve
@galaxydave697 ай бұрын
What size is the wera self adjustable does it do 22mm nuts aswell
@patterdalezipsuzilil7 ай бұрын
God I hate them crimp fitting
@sonacphotos6 ай бұрын
They are perfectly fine. 50 year warranty. The copper compression does the sealing, the o ring is just backup. Fast and efficient, no messing around with smoke alarms or inhaling fumes. Get more jobs done faster, more money, happy customers. Get with the times, this is how its done now.
@patbartos33737 ай бұрын
What’s the name of that water bag? That’s the cats ass!
@mmplumber7 ай бұрын
Derblaue folding bucket
@GeorgiosStarakisАй бұрын
What is the brass accessory immediately after the switch for ?
@mrrallyeman389Ай бұрын
If this is in the UK where's the proper stopcock and nrv ?
@mmplumberАй бұрын
@@mrrallyeman389 in the merchants still bud
@EvansTime7 ай бұрын
Why all the copper compression fittings when you have a pro press? Why don’t you just use male adapters? I’d sleep better with no compression fittings
@_tmmy_7 ай бұрын
What’s wrong with compression fittings exactly? I have never seen a domestic UK plumber fit a valve with pro press ends, more than likely because they don’t exist in the UK or they are extremely rare to get ahold of and expensive. Push fit valves are a similar alternative but personally I would rather steer clear of any fitting that relies on rubber O rings to do the sealing. At least with compression you know that once you tighten the nuts up the olives get squashed into the tapers of the fitting and grip the pipe well.
@mmplumber7 ай бұрын
We don’t have press valves that easily where I am
@mmplumber7 ай бұрын
I like press but great to have a joint you can remove
@paulfisher62896 ай бұрын
Do you have links for the tools you used ?
@IvanBogdanovych7 ай бұрын
Hello, Where to buy tube cleaner brush?
@mmplumber7 ай бұрын
Wait some time and I’ll have a link, I’ll do a few videos on the new version I’m out in a week or so
@paulknight4107 ай бұрын
What's with marking each tube before pressing?
@MagicDoughnut7 ай бұрын
Its a requirement for press fittings to ensure enough pipe was inserted inside the fitting prior to press.@@paulknight410
@6896mcand7 ай бұрын
I think so you know they haven't slipped out?@paulknight410
@Christopher12345xy3 ай бұрын
@@paulknight410 it’s for the manufactures guarantee, if you have a leak or problem in the future they won’t guarantee it if you’ve not marked the correct depth or if you haven’t de-burred the end of the pipe 👍
@stuartscott55063 ай бұрын
What ratchet spanner are you using
@bobthebuilder2016 ай бұрын
What's the name of that quick wrench?
@peterluetchford2195Ай бұрын
Please put the jointing compound on the fitting side of the olive…complete waste of time on the nut side
@antoniogalluccio42136 ай бұрын
Link to Pipe cleaner for drill
@creeper24792 ай бұрын
No pipe bending in this one
@job19257 ай бұрын
Класс!
@baduncle63787 ай бұрын
Why does he mark pipe with marker when he ain’t taking out?
@lukaszskor59737 ай бұрын
I gues to see if the fitting is in the same position before and after pressing, me think
@baduncle63787 ай бұрын
@@lukaszskor5973 makes sense thanks mate
@puzz23896 ай бұрын
@@lukaszskor5973 spot on!
@Christopher12345xy3 ай бұрын
It’s for the manufactures guarantee, if you have a leak or problem in the future they won’t guarantee if you haven’t marked the correct depth or if you haven’t de-burred the end of the pipe 👍
@torinbrown81966 ай бұрын
Not my line of work but interesting. I'd really like to know more about that ratchet like pipe wrench if anyone knows please hit me up.
@faconbill6 ай бұрын
Wera Joker
@TheAkbarskazan6 ай бұрын
А зачем он перед тем как обижать маркером отмечает?