Just that the video is too long… I completed watching it in 2 days
@buzzsaw.slicer4 ай бұрын
Can we learn everyting about diffrential
@dinhtuan7524 ай бұрын
Current Technic Gears as of mid-2024: Spur (Only meshes in an linear): 8t with Dual Face 12t (NEW for Spring 2022) 16t Reinforced (LBG, replaces older version) 20t (NEW for Spring 2022) 24t with single axle hole (Replaces 3 axle version) 40t Double Bevel (meshes both linear and 90 deg angle): 12t (Black) 20t (Tan or Black - commonly used) 28t (LBG, Now recolored to Yellow in 2024 but LBG is a common one) 36t (Black - Uncommon now) Single Bevel (Only meshes in 90 deg angle): 12t 14t THICK (NEW for June 2022, Only meshes with 22t diff gear in a 5x7 frame) 20t 20t Pin hole (Used for Linear Actuators that idler gear creates less friction) Racks (For something else that converts rotational to linear): 1x4 1x7 (Steering Rack) 1x13 (Steering Rack) 6x6 (banana) (NEW for October 2021?) 11x11 (banana) Worm (make something that holds the position or gearing down slower): 2L new (Replaces the older one, making it cheaper) Short Worm Gear (For 20 and 36 tooth double bevel gears) Differentials (For vehicles that turns easier): Differential Housing 22t Differential Gear for Differential Housing (NEW for June 2022) 28t Bevel Differential Gear (DBG) Clutch Gears and Others (Gearboxes, Specialties, etc): 16t spur (Red) 20t double (Blue) 20t spur (NEW for August 2022) 24t spur (NEW for August 2023) 8 Tooth Arm Gear Knob Wheel Offset Knob Wheel (NEW 2024) 28t Turntable 60t Spur Turntable (NEW 2022-2023?) 3L Driving Ring (DBG) 3L Driving Ring Extension An Various colors of genuine 3l axle connectors for 3L Driving Ring (Same goes to 2l axle connectors for newer 2l driving ring). 2L Driving Ring with 8 teeth (NEW for August 2023) 8 Teeth Driving Ring Extension (Replaces 4 teeth version previously) Changeover Fork (NEW for August 2023) Rotary Catch (Orange) Changeover Cylinder (NEW for August 2023) Changeover Catch (new varient in 2020, differently-shaped axle hole and the hole at the lever's tip may not be compatible with earlier flexible cable parts.)
The quality of your videos is getting better and better! 👌
@brickaversion4 ай бұрын
Thanks
@LucasDynamics2 ай бұрын
And see as I told you... 20k views... Focus on quality!
@LucasDynamics2 ай бұрын
@@brickaversion OK, here it is: lucasdynamics_82520
@angelahatcher5343 ай бұрын
Know how the teeth can slip if you make it go really fast you can make him slip, but if you’re going slow, it won’t slip with a really good type of clutch stripping gears
@brickaversion3 ай бұрын
True
@brickaversion3 ай бұрын
There needs to big pressure or force and fast speed
@0xferd3 ай бұрын
man, I miss playing with Legos, an awesome childhood I could say.
@Mercarious3 ай бұрын
Try making a working gun with them. It's a truly amazing experience.
@mihailucaci91184 ай бұрын
crown gear is used to connect spur gears in right angles, the bevel gear cannot be meshed with spur gears in right angles, but a crown gear can.
@alfredsolenthaler3 ай бұрын
It is only for that, although it can be used as a spur gear too. It is very useful with those differential housings with spur gear only.
@Jadg.pz.kpfw.CC64-2M-Jumbo3 ай бұрын
And the gear itself existed before bevel or double bevel gears.
@jimiwills3 ай бұрын
@@Jadg.pz.kpfw.CC64-2M-Jumbo yeah, like a decade before.
@Jadg.pz.kpfw.CC64-2M-Jumbo3 ай бұрын
@@jimiwills A stop-gap if you will.
@LucasDynamics4 ай бұрын
Nice!
@mattscott89613 ай бұрын
Very helpful! Now I must go and sort my gears into all their different types!
@Mercarious3 ай бұрын
8:37 This would actually be on the same line because they are not apart from each other. If graphed, the line that the gears that you called "parallel" would be the same exact line, but a parallel line would have the same slope with a different x- or y-intercept. Call me a nerd if you want; I just wanted to classify.
@YouPlague4 ай бұрын
Surprised to see a video from channel with so few subscribers in my feed. But it's quite nice. What I'd like to see is also mentioning the years the part has been manufactured, not only because I'm a big nerd, but it can sometimes explain "why this exists".
@AlexVitaliyZ3 ай бұрын
I just got a new lego technic set and I want to use the gears for a new machine! But my brain was to dumb to understand how it works XD but this video helped me out sooo much! :D Thank you!
@brickaversion3 ай бұрын
Glad to here that !!
@brickaversion3 ай бұрын
If you think it helped you maybe you could put it on your community tab to help other people who might not know... :)
@AlexVitaliyZ3 ай бұрын
@@brickaversion I will do that now! :D
@SupasitPhungrattana3 ай бұрын
19:54 it used with gear racks of course
@Rokinso3 ай бұрын
This video was very helpful for me, thank you very much.
@brickaversion3 ай бұрын
Thanks !!
@stunninglego4 ай бұрын
Thanks for the video! It helped me a lot! Keep it up!
@brickaversion4 ай бұрын
Thanks !!
@Brunon-bj1hx3 ай бұрын
3:33 there is aslo an yellow gear that fits with the yellow bevel gear
@brickaversion3 ай бұрын
Ya, unfortunatly i coulg get it cause its in very few sets
@anniefournier37564 ай бұрын
Good job❤
@brickaversion4 ай бұрын
Thanks !!
@jasonnathanmason35472 ай бұрын
“naming their names” 💀 0:14
@jefferyallsop5413 ай бұрын
8 tooth gear with 1.5l axle it has been made for going up and down like a bird's wing
@brickaversion3 ай бұрын
I realized it after the video !! i made a short
@jarkko473225 күн бұрын
Hi! What is the purpose of the knob gears? I've built one set that has them, but I don't know why they are used instead of normal gears with teeth. Thanks!
@brickaversion25 күн бұрын
They are usaly used for mechanism in cars, handles and other features i might cover later. I might make a short about it soon
@KaisondavisАй бұрын
In English, if you see a th in a word, it is never pronounced like a t (except in proper names of non-english origin like Thailand for example). The th sound is like an f or an s. Instead of teeth to teeth like an s, or lip to teeth like an f, put your tongue in between your teeth and make the same sound but with your tongue. It's so similar to an f sound That on video, people might not be able to tell. Many cockney accent people in England speak English this way. But saying a t sound when you mean th, is just as crazy as saying a c sound when you mean ch.
@shinriguzai3 ай бұрын
I feel like earlier in 10:12 that I'm being rickrolled...
@Daniel-ie7oh4 ай бұрын
I have the gray 8 tooth and for some reason it slides loose on axles so it's basically like the no friction gear
@rc-fannl73642 ай бұрын
Some of these have a very loose fit indeed, Lego tolerances are a bit more random these days. Assuming your 8T aren't cracked
@exotixzphantom17 күн бұрын
where to buy these gears? i want to experiment
@brickaversion17 күн бұрын
You can go to this link: wobrick.com/product-category/brick/gear/ and use the discount code BrickAV for 5% off.
@ialevc382 ай бұрын
hey, i liked!
@brickaversion2 ай бұрын
Thanks !!
@EilikHatesUTTP2 ай бұрын
cool
@ThePawnBoi3 ай бұрын
I tried the lego knife thing, its more like a saw
@jimiwills3 ай бұрын
Nice video.
@brickaversion3 ай бұрын
Thanks !!
@Lumin3k3 ай бұрын
Missed 22T and 14T Bevel gears from new alteration of differential
@brickaversion3 ай бұрын
I missed a few gears that I couldnt find of the internet But when I get them later ill make a nother short video about them
@linkivan1Ай бұрын
Can u do a vid on gear ratios
@brickaversionАй бұрын
I wanted to but didnt have the time, maybe for a membership content
@brickaversionАй бұрын
it depends
@uattiasАй бұрын
Teeth. The gears have teeth. Not tooths.
@brickaversionАй бұрын
true but in the name lego gave them use tooth
@uattiasАй бұрын
@@brickaversion well it depends on how you say it really. "This is an 8 tooth gear." "This gear has 8 teeth."
@przemekburnat61063 ай бұрын
Why did u use plants vs zombies backround music
@buzzsaw.slicer4 ай бұрын
Why you love pvz soundtrack
@eddraouyayman4 ай бұрын
where is the 14 tooth bevel gear?
@brickaversion4 ай бұрын
I take available gears and not retired gears
@rc-fannl73642 ай бұрын
@@brickaversion But you do mention old version of some gears, and these are retired as well, right?
@brickaversion2 ай бұрын
@@rc-fannl7364 Ya I did forget A couple gears cause I couldn't get them.
@minhbaolegosandgaming3 ай бұрын
The gear in 19:50 is useless.
@brickaversion3 ай бұрын
If you go watch my shorts I made a vid about making it usefull
@cmtg46120 күн бұрын
no i dont dont know how i got this account back i just saw a post on the other day that someone was using the same account and i was like what the heck is that supposed to be. i just saw it on my feed and i thought it looked weird. but its ok im not the only one. the other one was just a little bit more like a little girl who was a bit more. i think its just a little bit more like a boy who has been around for like an hour now.please help me im under attack
@brickaversion20 күн бұрын
@@cmtg461 what exacly do u want me to do ?
@AdolfZachrissonАй бұрын
"teet"
@robertfrojdo88192 ай бұрын
You can have cancer because of your left thumb nail that can mean cancer
@LucasDynamicsАй бұрын
True!
@Legolabcraft563Ай бұрын
@@LucasDynamicsyesss
@MotorGraderGamingАй бұрын
@@LucasDynamicswait he has cancer??
@LucasDynamicsАй бұрын
@@MotorGraderGaming I don't know, he could have...
@brickaversionАй бұрын
Its not cancer its just temporary that comes and goes because of someyhing with cells inside ur body something oike that