New Wheels for My 2012 Camaro SS | MRR M228 | Z/28 | Wide 315 Rear Meats!

[@JamesSmith-sq8rb]

Black carbon fiber hood and power coat the calibers yellow and get read of the white stripe on the deck lid and you’re in the mix👌🏾

[@brandonwoods9866]

Beautiful 5th gen bro. Satin black your hood. I have the zl1 wheels on my 2012 ss2. They were 20x11. Had the. Widened out to 20x12.5. Running 345/30/20 out back.

[@bigblockkev]

Wow, you were able to fit 345’s?! Did you have to run fender flares? Would love to see a picture of your ride.

[@joshoetken5846]

Yea I'd love to see as well, sounds pretty sweet

[@josephsolomon8623]

Solid black hood maybe the black carbon fiber or carbon fiber black wrap on the roof

[@bobbyb5215]

Definitely go with yellow calipers I have those on my yellow 5th gen with black wheels. Also black fender hash marks

[@alanbalcom9654]

I would do a solid Black hood that would look sick.

[@13swims]

And roof and trunk

[@kevinfleck1296]

Nice wheels, dude. The car is coming along nicely.

[@bigblockkev]

Thanks man! More mods coming.

[@paisano316]

I LOVE those wheels!! 😩💯🔥

[@redphoenix3862]

Red calipers to compliment the ss logo

[@bigblockkev]

That’s exactly what I did. Check out my later videos

[@ricric-po4pq]

Is 295/35/20 in the front possible?

[@The412Devil]

Black hood and yellow calipers. Then a front splitter and side skirts car would look perfect

[@Jeremiah0618]

454 ss clean🔥

[@rudypinedo1587]

I would go blackhood red calipers Enjoy

[@gustavodelgeh3580]

Yo your dads truck 🔥👌🏾

[@eddiesaucedo2702]

Your dad's truck is sick af

[@bigblockkev]

Thanks bro. It’s a rare truck. Took a long time to find.

[@saldanapete10]

Looks amazing! 👍🏼

[@bigblockkev]

Thanks man!

[@ricric-po4pq]

did you have any problems in the rear like rubbing??? and why not 285 in the fronts??? explain please ???

[@pewe3247]

Mine got black stripes sorry wasn't really into the white stripes but love the wheels bro

[@bigblockkev]

Oh, don’t be sorry. I hated the white stripe too. See my later videos. I wrapped the hood and deck lid. So much better.

[@BaconKuna]

hi. how low your rear and front go?

[@robertlizalageorge8011]

Love the look of the wheels and tires. Thinking about purchasing these (gun metal version) rims for my 2010 inferno orange camaro. What was the exact version of the Michelin Pilot Sport tires you purchased? I saw the size, just curious what Pilot Sports u went with.

[@bigblockkev]

Went with pilot sport 4s. They didn’t last long tho. Soft compound. Rears lasted me about 8 months. Daily driven.

[@robertlizalageorge8011]

I'm considering Nittos . It is garage kept with only 49,000 miles. Mine is about 500 hp to the wheels and about 500 torque as well. Drive it maybe once a week. Thanks for the feedback.

[@havrda]

Great video and information. Did you look into the +23 offset vs the +35 for the front? It looks like your +35 is tight. Would the +23 have pushed the wheel out a bit more and caused a rub?

[@JDOverclock]

Yeah, his +35 is very under the fender on this video, a bump on the road may make it hit!

[@MrDannyZ123]

On stock suspension not a chance

[@bigblockkev]

The front wheels do stick out a bit more than I would have liked but they don’t rub. Even on lowering springs.

[@terminatorx6766]

I believe you go black strip it can compensate the yellow calipers

[@Lostabyss999]

Hey man what lugnuts key size is that i lost mine

[@daddy9266]

Wow looks awesome! Did you feel much of a weight difference?

[@bigblockkev]

No, not really. I also went a lot wider in the rear so more wheel and tire probably added weight. LOL.

[@ghostman52621]

I got 245s front 275 back same rims different tires

[@xnotic24]

Looks good man, except that white stripe going down the middle lol. Paint it black or lose it and you'll be golden

[@bigblockkev]

Yeah, in a later video, I removed the stripe down the hood and wrapped the hood.

[@Pickles4825]

I have a stock 2010 Camaro SS, will these wheels and tires fit mine with no rubbing,

[@AIFANATIC213]

I got rid of mine for iroc wheels had to change it up

[@TooLoudSS]

Looks sick !

[@eloyruperto5016]

Question, how many inches is your car lowered?

[@bigblockkev]

1.4 front, 1.2 rear. H&R springs.

[@jaecamper8809]

What’s the bolt pattern on those bad boys

[@bigblockkev]

5x4-3/4

[@Carhauling431]

Is the car lowered? I can’t tell if it is from the video

[@bigblockkev]

Yes. H&R springs. 1.5” front, 1.2” rear.

[@michaelscott7706]

I'm interested in MRR228s also. Do they rub when you turn any mods needed or is it a straight install.

[@bigblockkev]

No mods needed. Zero rubbing. Even with 20x10’s up front with H&R lowering springs. Perfect fitment. Definitely worth the price!

[@bigblockkev]

@ryan ryanFlush with the body. They stick out more than the stock wheels but they don’t go pass the fender.

[@bigblockkev]

Front 34, rear 43.

[@josenavarro2363]

Hey got a question , is your maro lowered ?

[@bigblockkev]

Yes, H@R sport springs. 1.5”.

[@jeffreyware6223]

I just lowered my 2010 with the B.M.R 1.25 springs the drivers side front sits a little lower than the passenger side any advice?

[@tommyallen7840]

Did you put new TPMS sensors in? Any issues or rubbing?

[@bigblockkev]

I just transferred the factory ones in from my original wheels. No issues with sensors or rubbing. Fit perfect.

[@eloyruperto5016]

Your car looks great, wrap the hood satin black, that will make a big difference...

[@bigblockkev]

Checkout a later video. I wrapped the hood carbon fiber.

[@Khorias]

Where did you get the rims at? Size and info? Also do they scrub at all?? And yes get rid of the white strip!

[@bigblockkev]

Got them from MRR directly. Wheels are 20x10 upfront and 20x11 rears. Zero rubbing. White stripe removed and carbon fiber was added. See my later videos.

[@saigearce2851]

What’s your offset?

[@christopherwooten2682]

Hey killer setup. I'm doing the same thing but I can't find the tire sizes. Do you mind telling me your tire sizes front and back?

[@bigblockkev]

I’m running 275/40/20 up front and 315/35/20 out back.

[@jarrettgillespie1077]

where did you get your mrr center caps?

[@bigblockkev]

They came with the wheels. Ordered the wheels straight from MRR.

[@billjohnson5023]

What do you torque those new wheels too

[@bigblockkev]

I put them at 100ft lbs. Then check them again after 100 miles.

[@63davew]

The White needs to go go with Black Stripes or black hood.

[@Khorias]

DO a carbon fiber wrap on your hood!

[@bigblockkev]

Already did. Checkout my other videos. :)

[@daniel504_8]

yellow calipers with black words would look good

[@jona16ify]

Why did you make the front tire ratio 40 instead of 35 like the rear? And how come you went with 275 for the front I’m wanting maybe 285 like phastek recommends but I’m not sure I’m trying to get the same setup and still learning your car looks amazing btw!

[@bigblockkev]

The front and rear offsets are not the same. The factory offsets are 40 rear and 35 front. Trust me, you won’t want to go any wider than 275 tire for the front.

[@ricric-po4pq]

@@bigblockkev 285 in the front why not ????

[@anthonyarellano4289]

Brother, did this wheel setup throw off your speedometer??

[@bigblockkev]

No, the Speedo was still good since I didn’t change the diameter. I stayed with 20” rims.

[@anthonyarellano4289]

Right on. I just got a low mile 14 1le & I been running the square set up 285/35/20. Been thinking of running 315/35/20 in the rear. All tire shops are telling me it’ll throw off the speedo.

[@chinomv9607]

Are you on stock springs ??

[@bigblockkev]

No, H&R sport springs.

[@SuperGorilla68]

Flat black hood red calipers. Have a 13 1 le.

[@bimmersandars9221]

Would it be OK for me to get some of these rims for my BMW x5.

[@bigblockkev]

I don’t think you need my permission. You go right ahead buddy.

[@leonelgonzalez-cm2jc]

Was your Camaro stock height or dropped on this video. Bc mine is dropped 1inch on springs and I wanna get the same tire set up in the rear 315

[@bigblockkev]

Camaro was lowered 1.5” before the wheels went on. No rubbing

[@FastlaneHero]

🔥🔥🔥🔥 looks soooo damnnn gooddddd

[@Marogang7]

Kno this two years old me I’ll make that white stripe black or just black the hood & paint brake cals yellow

[@golfproeric]

Is your car lowered or stock height?

[@bigblockkev]

Lowered on H&R springs. 1.2” all around.

[@iolacowgirl]

Way way beyter! I want the same on my '15 ss/rs. Hows the ride? Any different?

[@bigblockkev]

Nothing changed. Feels good, no rubbing.

[@TheBryceJohnston]

could you use these on the v6 camaro?

[@bigblockkev]

Yes, the offset and pattern will be the same.

[@jeffreyware6223]

What rear spoiler are you running looks good.

[@bigblockkev]

Running the ZL1 spoiler with wicker bill.

[@ukleadsolutions1850]

bro where did you get these wheels ?

[@bigblockkev]

You have to find a MRR dealer. Most wheel shops should be able to help you

[@juanarguijo564]

Did your mpg take a hit? Are you spending more on gas now or no?

[@bigblockkev]

No, stayed at around 16-17mpg

[@juanarguijo564]

@@bigblockkev just upgraded but felt like I was wasting more gas lol, might just be me

[@1LElife]

What TPMS & lugs did you use? Any issue of the TPMS hitting the brakes?

[@bigblockkev]

Factory TPMS with spline lugs. Had to cut the rollers off the pads.

[@robertleal1595]

@@bigblockkev I’m getting a weird ticking noise ever since I installed mine. Any idea?

[@bigblockkev]

Do you still have those rollers on the brake pads? The rollers were hitting my valve stems. Had to cut the rollers off.

[@robertlizalageorge8011]

​@@bigblockkevdo you get more noise now / squeaking now that you removed them?

[@bigblockkev]

@robertlizalageorge8011 It’s been 2 years now. Brakes are the same.

[@LSXperts72]

Whats your spoiler?

[@bigblockkev]

ZL1 spoiler.

[@mxxtvmes]

What are you lowered on? And how many inches?

[@bigblockkev]

I’m running H&R springs. 1.4 up front, 1.2 out back.

[@mxxtvmes]

@@bigblockkev looks aggressive. You have any camber in the front?

[@bigblockkev]

Nope. Left that alone.

[@415bigk]

Here since 89 subs

[@dagorilla5177]

Black bro! Make it look like a mannnn SS! No offense intended. You already got da blk spoiler n wheels. Black calibers, and a black hood ! Yeah!!!!

[@jonathanhobbs4009]

What is front offset?

[@bigblockkev]

Front offset is 35.

[@raymathiesen1392]

Black calipers yellow brimbo stickers

[@masterfiregaming9758]

Where can I order them 😁

[@bigblockkev]

Their email: [e-mail] Phone: [phone] Website: MRRwheels.com

[@jblovell9065]

Clean

[@bobbyb5215]

What were the offsets?

[@bigblockkev]

35 offset for the front and 43 offset for the rears.

[@HB_INA_MARO]

Black hood

[@bigblockkev]

Yeah, that’s what I’m thinking as well.

[@nino6926]

Any offset?

[@bigblockkev]

Yeah, I believe its 35 front and 43 rear.

[@pmprei3767]

I say black hood.

[@jorgesalinas32]

They look like z28 rims

[@bigblockkev]

Exactly what they are, Z/28 reps.

[@MrNonStopOrator]

Go without the stripe just yellow bro

[@rogerbigblock]

White stripe has to go

[@rudypinedo1587]

Black out the hood and put red callipers on Now your talking now it looks Bad-ass

[@bigblockkev]

That’s exactly what I did. Checkout my channel to see how it came out.

[@charlestaylor7317]

Get rid of the white on the Camaro

[@bigblockkev]

Already did. Checkout my later videos.

[@tucoramirez9729]

🤮blk rims🤮

[@auto-america2020]

Ugly ...im stock man car

[@bigblockkev]

Appreciate your comment. Good luck with your “stock” car.

[@brandonwoods9866]

Yes I was able to fit 345s on. They have to be 30series in height. When I had the zl1 wheels widened we did the math on the offset to make sure they fit. Send me your email and I will send you some pics

[@bigblockkev]

Email: [e-mail]

[@ThatJones]

Black hood