NEW YEAR, NEW PROJECT!!

That’s right new year new project!!! we pulled in the 1968 C-10 and tore it apart getting ready for its LS engine, and some air ride!!

[@RanchBuiltRatRods]

CWC: “Doing dangerous stuff safely”. Next T-Shirt. You’re welcome.

[@johnswain9941]

U have a PO box or address

[@RanchBuiltRatRods]

@@johnswain9941 me or Cory and Hannah?

[@jhawk1985]

This truck is going to basically be my dream build. 68 stepside LS powered, on bags with patina. This build is gonna be epic and I will watch every second. Give us a little more to watch than we normally get. Lucky guy that gets to own this rig.

[@sergiogarcia2361]

Checking in with CWC don't be Dumb hit the Thumb injoy watching your videos.

[@lostreb]

I have a 69 that exact same color I've owned since 1972 (as well as a blue 1972) that right now has over 250,000 miles I've logged all myself. I had the axles redrilled to 5 lug, and changed the front spindles to 1972 disc brakes. I really love being able to use original equipment / original equipment compatible parts. The 69 has a built 350, and the 72 (with just 105,000 miles) still has the original 350 from the factory. AND...Just for the Record...Those Door Panels are not only the "ORIGINAL" Door Panels, but the Original Color direct from the factory, whether you like it or not. Those Door Panels are worth their weight in gold, so before you trash them, please keep that in mind. (That comes from someone that has been blessed and fortunate enough to be on this great planet well over 3/4 of a Century.) While all I've said might not be of interest to those at Cory Wheat Customs, much less those that are of the "Slam Everything Into The Weeds" and patina rules crowd, I'm am a firm believer in when you have an Original Vehicle, "Keep As Much Original As Possible Whenever Possible." I'm extremely interested in following the LS6 conversion, since I've been thinking about that for the 69 (Still have the original engine, but being stranded 1,500 miles from home, I installed what was, at the time, called a Chevrolet "Target" Made In Mexico Engine with a cam change. That is the engine that is now built. Not about to mess with the "totally original," much less the "Totally Original 72!!!!" No Friggin' Way!!! I might have been raised a fool, but I'm not a Friggin' Idiot!!!! (Humor intended!!!) And "Neither One" has all the rot this one has. I mean, I took great care of them!!!!

[@dthanson56621]

Patina look is not a problem,you guys do a great job, I'm just glad you are keeping it a gas engine vehicle! Can't wait to see it finished!!

[@ricksasek5483]

Just wanted to say thank you for the video me and my wife love all the stuff you too work on keep up it up

[@mikemccabe7124]

I've built over a few dozen 67's-72's since the 1990's i usually saved the stepsides for my personal builds and the last few i did i liked the most was i did 1-peice windows in both doors and i shaved the drip rails and man o man what a difference it did to the looks i loved the way it looked

[@larrybailey43]

I like that little sign…Not built for your approval !

[@dandunlap8638]

Who doesn’t love a C10?

[@maccollins6716]

Great video, you know you’re country when you can get a haircut while visiting your taxidermist.

[@groundedgarage5731]

Y'all should definitely try to go to Battle in Bama this year, definitely the best show in Alabama

[@dcampbell4079]

You know you have a perfect wife, when you say; “I know everything” and she nods her head in agreement.

[@user-ht1xu4gv2u]

A. Keeper

[@announcementman9399]

❤Another great truck build. You make such great progress in such a short time. I know it will be a great looking and driving vehicle. Have a great rest of your week. God’s blessings 🙏🥰

[@darrelkinney9856]

Descent 68 body n short bed A arm rear in good condition bring crazy money. Short bed steps outrageous high , bout3 gs to build from scratch. 400. New step tailgate.

[@fredk.2001]

LS swap, re-upholster the seats, get a fleetside bed for it, use the original rear fenders to build a dually bed. 10 lug wheels, etc...

[@michaelmonday418]

The C10 project will be fun to watch

[@gdbd6181]

had a 69 short box step side they had put a 454 in her that came out of a 70 chevelle wish l never sold it l really like that style of truck great video

[@chrisbigbendgarage634]

So awesome to see you guys work on a 68, the first teuck I bought all on my own was a 68 short wide and I spent many a night in the garage rebuilding it all before the benefits of KZbin channels like yours and the internet for parts keep up the amazing content

[@frederickcarr6416]

HAPPY NEW YEAR HANNAH AND CORY!! LOVE AND ENJOY WATCHING YOUR VIDEOS ❤ ❤ ❤ ❤ ❤ PLEASE!! PLEASE!! STAY SAFE AND STAY HEALTHY 🙏 ❤ 💙 💓 💕 TAKE CARE AND GOD BLESS 🙏 ❤ 💙 💓 💕

[@edsecorr7812]

Great job looking great keep up the great work love your videos thank you

[@chadximiness8741]

Remember Safety Third in the garage. Going to be a cool truck.

[@ricksimmons347]

Ah look the poor thing tinkled she must be scared 😢

[@davidilbeck]

You two “kids” never cease to amaze! You are soon to be Famous! much more than you are. I repeat that you are both extremely talented. Be proud. Every week surpasses the last. The opening this week was so professional. Really great in the dark and all. Don’t get too professional or you will lose your charm. Won’t matter though, I will always watch. I predict an invite to SEMA for you soon.

[@maxyearwood1085]

Nice Start! We built a 1967 Step Side 6 Cyl. standard for my son in the late 1970's. The engine was bad, so we purchased a low mileage engine from a 1972 Impala. Coupled it to an automatic with a Floor Shift Kit. Painted Candy blue, with Turbo Mags, Custom Grille and Interior work. It was the most reliable vehicle with no issues until he traded it for an '82 Sonoma.

[@southin47639]

Looks like an intro to a scary movie

[@rayeddy528]

Another great video from a precious couple !!! Thank you all !! Love you !! Please be careful and God bless!!!! Eddy

[@MacsSpecialitiesMotorsports]

29:00 List the frame high! If it doesnt sell build your Merch trailer!! Lovin the C10 build.

[@stevecr8934]

Yall talk Real Good. LOL. Love that stove

[@stevearnold100]

You really have some kind of guts to take on that body! While it looked nice from the top it looked like a lost cause from the bottom! It doesn't even look like there's enough metal left to weld patches to.

[@DroooooopDead]

Hey guys I only have 1 problem with y’all’s videos. And it is it makes me want more. Lol. Happy new year

[@kennyphillips8603]

Saweet truck. Love watching you two do your magic.

[@davidjessee7701]

Happy New Year!! I love the c10!!! I owned a green 68 c10 short bed stepside with a 327 double hump heads and 3 on the tree… I’d give anything to get it back but that’s been 30 years ago…

[@williamvandyke1832]

You guys are awesome love the wood burner

[@darrellroeters4951]

That motor and frame are clean.

[@michaelkimberlin-nn8rk]

Grate job God bless you all keep it up

[@franktadlock4691]

I got my shirt with the pinstriping and Hannah's truck on back yall special ordered for me love it thank you guys and thank you sister she was great. Happy New Years

[@GregoryBamber]

I have always cut out rust before replacing sheet metal.

[@southernrevivalautomotive]

This is an Awesome project to start the year off with! Happy New Year Y’all 🤘

[@andrewwalizer8525]

The color and white rims puddin fab shop style lol

[@Randy-ru5rk]

What up homies Indiana in the house awesome team work y’all awesome couple enjoy your videos y’all

[@jamesseltenreich652]

Happy New Year from your friend in Alaska 🙏❤️

[@tdetrucks]

Enjoyed to see you and the c10 that i have seen in person when i dropped Hanna's model truck and to meet you guys in person keep up the good work. I am putting a 59 cab on my 2007 colorado flatbed in spring.

[@robertstevison1448]

Awesome start to an awesome year !!!! Nice piece of Ole iron !!!! Yall are awesome as always brother and little sister

[@BudFranks-fu9ye]

New to the channel. Love your work. You guys rock👍💯

[@timdavis5390]

LOVE THE C10

[@bobtucker8875]

Thanks for sharing guys an Happy New Year 🎊. Glad to see ya again, 😁🎉. Very interesting 🤔 content.

[@jamesmallinger9555]

Can't wait to see the next project finished,LoveJim J&R mobile service and God Bless y'all and your critters

[@SethHollingshead]

Better off to put a new floor in. Its easy.

[@johnboysshopofdreams72]

I have bought tickets to Piece and Grease show in May will be bringing my S10 ratrod Ihave been building since I met you in FrenchLick INd. My Daughter is coming along again with me we live in southern Illinois. I hope you two will be there. I would like to know what shows you are going to ge at this year and i'll try to make a few.

[@chrisjudah5101]

Cory, you’re the only person I know that goes to a Taxidermist to get a haircut!😂😂😂

[@corywheatcustoms]

Lol!! 😂

[@scottreeder7023]

She looks good in those jeans

[@philkearney3202]

Hey Cory Put that 6 banger in the fork lift👌

[@timomikkola2931]

Happy New year from here in Finland and great projects you have👌

[@jonathanbrogdon9067]

Good customers are few and far between id take care of him and a dang good truck to start with

[@user-ws6sh3wk8g]

Going to be a àwsome build

[@neoncatfish4038]

My first vehicle I ever had was a white 68 stepside. Wish I still had it! I was a sophomore in high. Had so much fun in that pickup! If it was mine I would just do a engine swap, with some nice wheels and tires. Would not worry about the paint. I've been thinking, I would like to find one. And this make me want it want it even more!

[@ChickenFarmer-ep2bp]

Hey guys. Awesome new build. Hopefully I'll be able to get over to the shop Friday this week. And get a few of the ammo boxes out of your way. Lol.

[@donscarborough1951]

Awesome Video God Bless

[@drewpop221]

That’s the year I was born. Hint hint birthday gift. Lol

[@clydegreenwood5673]

I like watching your guys videos you guys do awesome work and keep it up and happy new year

[@timpellett9701]

Cool new project truck! Can’t wait to follow the project. You guys are so funny opening your packages! We got our dog a bone like that and an hour later she had it buried and I haven’t seen it since!😂✌️

[@Smokeroux]

Great Video🏁 I thought Cory also had a C10? Happy New Year HOMIES 🤣👍🏼🏁

[@dwaynesullivan-qo2iz]

Good luck in the new year. And remember to have fun

[@Pwpapa.7]

Happy new year and that’s a nice truck

[@lolife999]

Best build yet! Love it

[@kellybasham3113]

Love your videos

[@donlandenberg8126]

I love that you have a plan and are sticking to it. Thanks for sharing with us.

[@GregoryBamber]

I would have loved that six for some of the Holdens I have owned. Looks just like a Holden six but a lot more cubes, lol.

[@donnieslaughter764]

Awesome guys great content

[@Pure_KodiakWILD_Power]

🤯🤯🤯 I was gonna say, that's a pretty clean truck, and then you say the customer wants it patinaed????? 😂😑🤨🤷‍♂️

[@TheSweetPatina]

Can’t go wrong with a big back window stepside!!

[@alencareisakustom]

Projeto show!!! 😍 grande abraço do Brasil

[@georgegalbraith9899]

Man you all could have come to dinner with us tonight at the Cracker Barrel and I even wore your T Shirt there

[@williambruce9207]

Talk about Ford seats, but you put Ford 9 inch in it. Looks good though.

[@xxjoetaylorxx]

I've been waiting on this one sence i dropped off the frame to you

[@kpit7847]

That is awesome little step SIDE going to be sweet Hannah is in heaven 😊✌️

[@shane8493]

Happy New Year & God Bless You two

[@roypowell3450]

Super job guys...and a healthy New Year! Cheers from the UK.

[@fthwheeler1]

Happy New Year !!

[@xxjoetaylorxx]

That frame is worth something to some one looks like its in good shape😊

[@corywheatcustoms]

It’s nice!!

[@KCsRefurbs]

Great channel..Happy New Year..I got the same hoist been using it for years I have seen the upgraded pump with air looks way easier one thing not great on these I also use it to pull beds for fuel pumps etc criss cross straps hook hoist in middle and lift it up works great.

[@revelatoryartist]

Great video

[@outlawz4210]

HAPPY NEW YEARS 🎉🎉💯🔥

[@rdratc633]

Love the videos!

[@andrewbarre9767]

Don't cut up a factory short bed ! It's not specific to a stepside; it will fit a fleet too !!

[@chrismathews663]

Nice editing! Always keeping it interesting!

[@ratrod6161]

Awesome guys

[@jeffbailey7765]

Good job and video homies

[@DCAutoEnhancement]

I sent you guys a video a little while back through your website. I live close and would collab with you guys on the interior. Looks like a fun project! Excited to see how it turns out.

[@corywheatcustoms]

Hey !! I’m glad you reached out !! I was telling Hannah today I was going to have you do the interior on it .. but I didn’t no how to get ahold of you cause I don’t run the web sight lol 😂 I rember seeing the video you made but that was while back

[@DCAutoEnhancement]

​@@corywheatcustoms Do you want to send an email that's listed on my channel?

[@jasonanderson6714]

That will be a sweet truck when your finished. Those sweet patina stickers are cool.

[@kenvangoe9358]

Glad to see you both are in full work mode again after the holidays. That 68 chevy is actually a pretty nice start for a project other than the six banger but then again that's one of the transmissions I got my start on many moons ago. Be careful and stay safe my friends God love ❤ ya both.

[@chevyfan82]

👍

[@tommyjefferson9525]

That's a clean motor what is that a 250 those are good running Motors you get a good one they last forever

[@DependableAutoTruck]

i have a white 2003 4 door dodge cab no i mean no rust white in color i also need a perfect 2nd gen dash for my 1994 ram 2500 i am in alabama. also have some cummins automatice trans cores

[@dumpsterd7148]

do a quick walk around vid on the little camper in the garage and your plans for it

[@corywheatcustoms]

There’s going to be a video 😎

[@jerrybushman]

Happy New Year

[@user-hb6pj9yz1y]

Keep up the amazing job , always love looking forward to seeing you guys 😊

[@warrenthornton3432]

Hi guys love the new project I think Salle's from (adventures made from scratch) has a couple of tailgate for that any way keep the videos coming.

[@janeteric8594]

Happy New Year homies! 😁

[@vinniegillotti9347]

So is the forklift gas or diesel? And honestly sounds like you should park it in the shop either way.