NEW YORKVILLE ES 18P POWERED SUBWOOFER TIPS & REVIEWS

Edited by VideoGuru:videoguru.page.link/Best

[@FLOWSPRODUCTIONINC]

Thanks for the info. Just bought 2 of them yesterday and will pic them up today and will try what you said. Thanks.

[@ronnelcato11]

I got the PSA2 it's not enough inputs in the back to do a Y set up but that shit is a monster on its own

[@DJSHADDY2K7]

Thank you for the information.😊

[@hollywoodthedj1673]

So you are coming out of the mixing board into the first speaker with that same cord then go into the second speaker and also the Y cables from one to the other and I’m assuming the Y cables are one cable connecting to each and then repeat to the last one correct?

[@Steven-zg5bq]

yorkville manual says if coming from a mixer use the line setting on your first sub,,,,,maybe speaker settings on sub 2 and 3 ?????

[@user-rn2jo3kz4k]

what if you run out of your subs up to your tops..? is there any issues with this method..?

[@larryparnell1818]

Who build your y cables,n what range of wire gauge 8 or 10

[@blackunitsound]

Becarefull

[@user-rn2jo3kz4k]

I'm gonna try the Y-cable thing on mine to see if I notice a difference, I've never heard of this before..

[@barefaceindian8821]

Have you tried it? If so what’s the difference… let me know asap I’ll go get Y cables for mine…

[@chubydatphaskanram9992]

What does the reset do ?

[@miguelalor724]

In reality all you need to do is put the left signal to the mono blend, and for the right signal you go into your line and that way you have a true stereo connection to your subwoofer that way you cover all the spectrums of your sound.

[@DjChazD]

Have you done this trick with a top speaker? I heard of some people doing this with qsc tops also!

[@Thekillafacesound]

I have done this all entry level powered speaker

[@dywanecrandell2739]

​@@Thekillafacesoundwhat tops you have with the yorkvilles

[@gabrielantonioperezmunoz3148]

Ubieras enseñado desde el mixer a los bajo y por que usas esas y

[@DJ_MurderBass]

I tried the same method and oh boy this bass kick hard day and night

[@Islandboi821]

The first one was the LS800 then the LS801

[@morandemorelosmoranmoran8411]

Hey brow can you show us from the mixer to the bus and tops that would help us better

[@barefaceindian8821]

I have an ES18P I will try this Y splitter to hear the difference

[@dj_pollo1727]

You try? Is a big difference?

[@barefaceindian8821]

@@dj_pollo1727 I haven’t seen my speakers since end of summer 😂 they still in the garage covered up 🤦‍♂️ hopefully when the place get warm. So tell me the difference on how they sound ?

[@blackunitsound]

That's because you are mono bass not bridge