Panel Linking Demonstration (System Test 26.25)

Everything is in the video.

[@Mattyz]

5:08 I saw that coming once I saw the alarm pulled. I knew was going to go off again. LOL😂😂😂😂😂

[@user-xj4bv6ky7d]

?

[@user-xj4bv6ky7d]

Oh lol

[@andrewschannel4259]

Yeah I was like "Uhhhhhhhhhh... I think you're forgetting something."

[@noahgoff9724]

I love the sound of that! By the way, This channel is awesome!

[@cameronwright8634]

Wire that to an alarm clock. Be one hell of a wake up

[@javachip9612]

Cameron Wright I am going to install a Spectralert Advance in my room. my dad says he's gonna use it to wake me up😁😁

[@PlausableApple4]

Best video if seen from you yet.

[@notifierfirealarms7286]

The specturalert decided that it doesn't like to be on camera!

[@notifierfirealarms7286]

It wants you to take a retake. And make sure you tell it to be an alarm not the worst code 3 in the world.

[@carlosq1248]

@Cap'n Tyler97 same in my school

[@patriotsforthewin7631]

While u were talking the MS2 is like SHUT UP AND SILENCE ME

[@electromaniac5573]

is it possible to wire addressable panels this way? the reason i am asking is because a school in my area had a simplex 4004, but has gotten replaced by several different honeywell and simplex panels over the years, including a 4010 and 7100. the fwr is killing the horns, one died this year from it, but i dont know if its possible to link two addressable panels to have the 4004 (controlling simplex 4903-9217?s and -9219s) hooked up to the 7100, because two Wheelock exceeders were added at some point and i think that they should stay on FWR.

[@DanTDMJace]

No

[@mustangSME1]

My schools gym has spetralert advanced alarms and simplex T-bar pull stations. The panels at my school are wired together and they only need to reset one the panels. For example if a BG-12 in the portable Is pulled they can silence the alarms from in the office or gym.

[@chicagolandhobby]

So what if you were to wire a double-pole relay to the NAC on each panel, then from that relay you have 2 separate contacts, so you could wire in both other panels to that relay. If you did that for all the panels, would it work, or essentially make it impossible to reset the system?

[@NewAgeServerAlarm]

You'd have crossed circuits and it would make resetting become hell.

[@sub_zer0517]

My elementary school had 2 wheelock 7002t’s but the strobes were very dirty and rusted and the alarm red color was just fading to faded pink

[@terrionevans908]

The Spectralert went very crazy

[@FireAlarmHowTooGuy]

Can I wire the Alarm Relay on the Fire-Lite MS-4 to a zone on another MS-4

[@DanTDMJace]

Yep

[@sfs2040]

At my college there are different buildings or "halls" that are all connected together and they each have an independent fire system, but they aren't tied together.

[@american0153]

sfs2040 that's not up to code

[@firealarm421]

Awesome. Just a question. I have an ms4 & an ms2. How can I make my ms4 trip the ms2?

[@michaelslama8407]

..

[@Kasey1776]

G

[@seanjuth]

capt421 the most basic way of doing it is wording the ms2 nav to the pull station circuit on the ms4 and reset both panels at the same time

[@expgretaillegacy]

This would be useful if someone were to build a system in their house and one in their RV and they can link them together when the RV's parked at home

[@MEASME1123]

You should do some with the one connected with the 5001dc

[@CODMarioWarfare]

Okay. 5, 4, 3, 2, 1 reset! DAMMIT I MISS- *alarms*

[@ADAAlarms2009]

When The Specter Alert Advance Went Crazy I Did Hear That For Some Reason It Did That And I Don’t Know Why It Did That

[@ThreedognightfanTZfan]

Omg it souned like the Speacter alert was screaming ha! =)

[@the_1drummajor]

There's a good reason for why addressable panels exist

[@electromaniac5573]

but what if, just maybe, the previous system was conventional? i know modules exist and stuff, but that would be annoying for a really old panel to work with.

[@engine30diver]

I have 7000 to tease in my school everywhere and they scare the heck out of me when they go off it's usually a drill

[@CJ9899]

Steve O What 7000 things to tease that you are afraid of do you have at your school?

[@blatheringblathers347]

I think he meant 7002T....... lol 😂😂

[@rubyovalle4841]

I did not know you had this video

[@nathancarpenter8267]

how do you know the order to reset the panels?

[@DanTDMJace]

Just resetting them until it works

[@Kasey1776]

Woah, cool!

[@miniman0404]

Say you push the drill switch on either the 8005 or 5001, would it trip the ms-2?

[@miniman0404]

@Aslin Fire Safety It baffles me how you manage to keep digging up 10 year old comments.

[@sean804able]

That is really cool. Why do you have to reset them in order and why will it activate again?

[@dragonlords102]

I know there wasn't any music playing but the alarms made some kinda music.

[@Thingbol95]

cool, i never knew that advances were released in 2008

[@jackver2006]

If anyone watched jimmy neutron he is the next jimmy neutron because he makes everything himself

[@redtv4me2010]

Do a fire alarm collection video please

[@OrthodoxChristianBeliever]

So, if u wire up a panel from a nac to another panel, that second panel will automatically go into alarm?

[@american0153]

LTCWM1 no without a relay, you'd fry it.

[@Ronnocbot]

@NewAgeServerAlarm Oh ok thats a good idea, so the other panels are based off of the MS-2

[@TREXi8005]

2 things: 1. If this were n a real building, would you have to go all around the building and reset all the panels, or would they use some kind of shortcut? 2.What is it that males you have to reset in that order? Why does it re-alarm?

[@DanTDMJace]

Annunciator for a shortcut

[@firealarmguys05]

i love the video

[@jennseidler]

Try to hook up all alarms to the ms 2

[@Ronnocbot]

if the ms2 is a piece of crap, are you going to sell it because my b-day is comming up and I will probably be getting money. Is there a way I can get it?

[@MEASME1123]

Your so cool. I wish I can be like you

[@miniman0404]

@NewAgeServerAlarm Thank you.

[@212Elevators]

umm... Andrew, you took the door off of the MS-2 and the 8005.

[@NewAgeServerAlarm]

Stephen Suppa I am aware of that.

[@rainbow_vader]

Multiple alarms that horribly clash because they all make different sounds on different codes Music to my ears

[@tiarraevans88]

Nathan carpenter might answer my question because his question is A question I needed to be answered by Terri on Evans not Tiarra Evans

[@judahtribe9204]

why does the ms-2 beeps after you reset it

[@newagederpderp]

Battery trouble.

[@Alarmo05221]

He reseted the panel at 4:58 with the pull still activated!

[@greyshadowalarms3890]

Perfect explanation of my school Dates are wrong though

[@NewAgeServerAlarm]

Heh nice

[@tiarraevans88]

Why do have a silence alarm pull station up and you didn't use it

[@Jessica_Linderman]

I don't know

[@Jessica_Linderman]

Tiarra Evans he used the silence alarm pull on system test 26.1

[@1mrhamel]

@TechnologysEdge they buy them like everyone else on ebay or somewhere else.

[@damiengamer15]

Andrew(NewAgeServerAlarm) What is an eight-thousand-fwive? lol.

[@nathanlee105]

5:07 (fire alarms) “stop talking!!!”

[@TREXi8005]

happy belated b-day

[@officer_matthew3196]

The WHEELOCK 7002T that's what I heard in 4th grade he's apparently someone got their jackets stuck in the pull station and set off the fire alarm s

[@EvanCoverdill13]

haha, imagine if that kind of setup was in place in real life! that would be a giant pain in the ass for the fire department! lol

[@Loganetics1]

Damn it, Jerry! I told you to press the button! Stop drinking your coffee Jerry, it’s your fault the whole building went into alarm again.

[@ncalarms6022]

I have a a feature I made on my panel. I made my own panel and I to Made another one so that I can have One trip the other and vice versa. So I had some issues with re-alarm and my panels would refuse to reset so what I programmed the panels to do Is when one is reset, It resets the other. +1 this comment if you think it is cool and reply

[@mktissuperkool750]

you are correct

[@javachip9612]

At 5:03 I just realized why the system went off again.. was because you hadn't reset the pull station after u resetted the system.... when it happened again I'm like what the... reminds me of 6th grade had an unexpected fire drill

[@seanjuth]

E C he realized that

[@noahkahoot3510]

4:14 (reset alarm x3 come on x4 alarm start and stops) shoot miss it (reset x4) good

[@fireandeurovision]

linked panels, just like my school except they are wirelessly linked

[@Numbuh07]

Wheelock 7002T: Continuous Simplex 2903-9101: March Time Spectralert Advance: Code-3

[@decepticonjunkheap5905]

the fire alarms made made there own song called cover lol

[@gretchenjohnson1067]

whole system.reset.one alarm goes off.reset.whole system again.reset.

[@dragonlords102]

Anyone hear a heavy metal kinda song with all the fire alarms?

[@dragonlords102]

Yeah the Spectre Alert Advance decided to screw the code-3 (Temporal) and decided to go into slow march time.

[@basstester3265]

So I’m just talking and then I hear a beep and then fire alarms are like hey we should freaking annoyed this guy and then he’s like huh Beep beep beep beep beep beep beep beep beep

[@terryb492]

spectralert advance out sounded the 2903 and the 7002t martchtime code3 continuious

[@Corvette1658]

and the new heath cancer center they are red so think when they remodel the other budings i think the old wheeluck e70's will be replace too.

[@tiarraevans88]

The specter alert made me do LOL ep ep eeeeeeeeeeeppp

[@fire-zq4xp]

The spectralert sounded first,Why?

[@NewAgeServerAlarm]

Shayne Waite It was the first panel to go into alarm.

[@tuanykeyz]

***** That's what he said.

[@newagederpderp]

that's what you said.

[@seanjuth]

VinaStudios that makes no sense what so ever

[@Goldenrod636]

Out of curiousity, have you seen a system where the original building had a Simplex system and the addition had a Wheelock system with electromechanical horns?

[@NewAgeServerAlarm]

No... ok?

[@Kyle-cv2hj]

The local mall here has a variety of alarms. Simplex, Wheelock, System Sensor, and Siemens. I bet it has multiple panels, just gotta find the annunciators to guess which ones..

[@dustinkey8885]

@@NewAgeServerAlarm do a video on how to change the lights in a 2903 light plate

[@Vyclops]

1:44 It sounds like its on hi lo

[@OrthodoxChristianBeliever]

spectralert went into slow march time, lol!

[@Ccs4646]

Can I buy that test wooden panel?

[@NewAgeServerAlarm]

What Annoys Me

[@Ccs4646]

Why are you commenting on such a old comment?

[@Ccs4646]

Look How old NAS's comment and my comments are. You are commenting on a "Said and done" comment. Im tired of google alerting me to you two commenting on a said and done comment.

[@Ccs4646]

***** So please just stop while you are ahead.

[@Ccs4646]

***** Thats not the point. My comment was old. There was no need for discussion after it.

[@jenpetrack7393]

Awesome but loud

[@mktissuperkool750]

hey you now fire alarm

[@cvela2020]

I really want to see it so i like your vedios but why did you had a real fire alarm

[@seanjuth]

cecilia vela he buys the fire alarms of the internet and sometimes gets them from building demolitions

[@Ccs4646]

I meant the 8051 proof of concept.

[@dabonemboi9436]

How do your neighbors not hate you

[@NewAgeServerAlarm]

I usually set off these alarms when nobody is home

[@Blacklight8001]

to do this you hook the panels relay that is swithed when the alarm is activated to the pull station terminals on the next panel (dont forget the end line resistor on the relays ;)

[@american0153]

Blacklight8001 tl;dr

[@vintagesimplexfirealarmsof6440]

The only thing I can hear is mechanical horn

[@HenBasketFireAlarms]

I am a strobe light and find this offensive to my sync module!

[@CJ9899]

6:26 basically all simplex panels

[@newagederpderp]

5:10 Absolute *LOL*

[@firealarmguys05]

Will you make a PDF for the 5001DC?

[@DanTDMJace]

Would actually be nice, 11/10 would reccomend

[@DanTDMJace]

OK i've figured out how to do it myself, just get 2 DPDT latching relays (one for NAC, one for silence/lights) and wire them up (ill make a video on how to do that when I get mine) and boom

[@MEASME1123]

Hey!!! >=)

[@Flamenmagic]

watch mini system test 9 and you will found out

[@lionofwinter1966]

like it

[@mktissuperkool750]

this is the same newageseveralarm

[@basstester3265]

How tall is simple thing the panels are hooked together huh Beep beep beep beep beep beep beep beep

[@xaviersoto722]

5:05 lol

[@8bits59]

Rip audio

[@alcopel12]

My school has the spatroalert it's crazy loud

[@villehynna9509]

Tyt5

[@Corvette1658]

they are doing the same thing at my communtry college they add it a new libary and and new heath caner center the main fire alarms at my communtry college are gamewell system with wheeluck e70's speaker srubles and they are remodeling 3 budings in the new add it parts and the remdeling parts the system is a gamewell fci e20 searers with spetralert adcanced speker srubles in white and red the new libery and tha part that was all ready remodel they are white

[@lileleflexman3482]

4:53

[@edwardandbrittanyanderson6277]

Pretty loud

[@stevenelsen2466]

Ha Ha 3 Panels Hooked Up To Together Very Funny MS2 Bg12l,s 2903 lite plate 2901 9838 horn wheelock 7002t spectralert advance p2r I get it now

[@dragonlords102]

5:06 FAIL!

[@dragonlords102]

Excuse me but, think of somthing else to say, because thats what I said... Look at the comment below you.