Great video, Easy to follow and every step explained. You did the repair with speed which makes me think you've done a few repairs. I have a 2nd Gen Primos Bi-Pod and one of the legs would not lock into place. After watching your video, and following your advice, My Primos Bi-Pod shooting sticks will hunt again this season. I used them last year on a Idaho Mule Deer hunt and a cow elk hunt in Wyoming, both hunts were successful using my Primos shooting sticks.
@mirkoslemensek99311 ай бұрын
A very good explanation for this kind of failure. I have successfully fixed the bug that was showing up on one trigger stick. Your video helped me a lot. Well done for such a video!
@ianwoods1384 Жыл бұрын
Hello my friend, I thought it was very kind, considerate, and thoughtful to produce your trigger stick maintenance video. I thought you came across as very confident in what you were doing and showing us. Although it may not be rocket science, often, many people like me just need that little push of encouragement that sends them on their way. Thank you again. You are great at what you do, and you are very kind and considerate.
@sjpbutcher Жыл бұрын
Absolutely brilliant mate I thought my sticks were knackered but all working well now 😊
@Ky-yy2bs3 жыл бұрын
I just watched your video on repairing the trigger stick I was having the same issue took mine apart as you showed in your video cleaned it really well put it back together now I’m back in business thank you sir you save me a lot of frustration and a lot of money
@stephenspencer82242 жыл бұрын
No ‘O’ rings found, interesting. I’ve just purchased a Primos tall Gen 2 tripod and as I given to do given it a squirt of Ballistol Universal Oil. Your strip down and servicing was easy to follow, thank you very much.
@richk18988 ай бұрын
That was a very useful video , thank you ! I’ve stripped and cleaned mine now and they’re like new . Happy New Year to you ! 👍
@-huntingwithairrifle7783 Жыл бұрын
Thank you my friend !!!!! I fix it !!! The only difference i just disconnect the lower part only and it was all rusted , i clean it with wd40 and now everything is fine !!!
@danparsons54404 жыл бұрын
Tried to return mine but the warranty was up,gave it a go after watching your video and what a wonderful surprise, they're as good as new! Thanks again!!!
@745images4 жыл бұрын
Great video, I eventually saved mine which had been in the garage for about a year. I never took the leg off, just broke the epoxy and started from there. 👍
@bnj96362 жыл бұрын
I’m very much obliged to you sir, I bought my Gen II trigger sticks 3 years ago 2nd hand and have had no major issues with them until last night whilst out Pest Controlling one of the 3 legs failed ( sliding like a trombone) rendering the tripod totally useless. So I decided to see what could be done to remedy the situation and came across your extremely helpful and informative video . As a result 20 minutes after the do I don’t I / shall I sharn’t I moment having gathered the appropriate tools together and following your advice I am now back up and running, with a set of fully functional trigger sticks. Many thanks for sharing your video , I’m well pleased that I watched it.
@leszek59722 жыл бұрын
good job !!!!!!! I followed your instructions and fixed my trigger sticks. thank you
@screwpull14 жыл бұрын
Having never handled one I was intrigued at their high price. Now I understand why. Looks like a well made bit of kit. Might have to get myself a set. Great video. Many thanks.
@Knappist5 жыл бұрын
Great job will keep this in mind for any future breakdowns with my stick, well done 👍
@tasmedic4 ай бұрын
Very useful video. Many thanks
@adsav184 жыл бұрын
Worked a treat on mine great vid thanks saved me buying another set 👍🏻👍🏻
@joedirt90983 жыл бұрын
thanks my friend. you just save me some money and the stick will go deer hunting again! thank you
@Grt234 Жыл бұрын
Happened to mine after 2 weeks.!!!! Sending them back.!!
@bradwilber44395 жыл бұрын
Thanks for this. Got me up and running again.
@larryfitzpatrick8404 ай бұрын
thanks for the instructions
@dandarrington73135 жыл бұрын
Thank you . Working like new again. I'm going to give a squirt of rust chech through the foot of the leg after each use and store upside down
@arpc5 жыл бұрын
Excellent video mate - I have a set of these, they're amazing! I'll keep this in mind for servicing. Thanks for taking the time to put this together. Top job! 😄👍
@arpc3 жыл бұрын
And that time has come... they've failed this evening! 🙄
@g0jsm3 жыл бұрын
had two pairs of these when the second pair went they also went back to the shop. Now I'm thinking of investing in the gen 3 version wondering wether they were any better. I only really want them, for a quick camera setup
@melvinhanson36594 жыл бұрын
Thank you for the video. Very helpful
@CristiNelxxx3 жыл бұрын
I just fix mine. Great vodeo . Many thanks
@volfan0866 жыл бұрын
I have the original version of this. Have had it about 4 years or so and the leg is doing the same thing. Unfortunately, I can't just twist off the cap. Most likely will have to use a heat gun to break the epoxy seal. Good video.
@MiNeYoursChannel6 жыл бұрын
+Jesse Conrad thanks, always nice to get appreciation. Heat sounds good. A leather glove for padding and then a pair of water pump grips or similar may help to get more force on it hopefully without leaving marks. Good luck!
@volfan0866 жыл бұрын
Got it off finally. Lubed it up and it's back in business for the woods this weekend.
@robertbarr80015 жыл бұрын
Clever boy! And great video too. I copied, and it worked. Thanks a million. I can only assume that the dislikers clicked the wrong button - I did that once elsewhere. Best of luck to you.
@scottcubitt24054 жыл бұрын
Great video, thank you 👍🏻
@michaelbrown174 жыл бұрын
When you stripped the leg into two parts there is a black plastic of plastic over the top of the tube about (about 50mm long). Mine on my faulty leg is loose, is it meant to be glued to the tube? Your doesn’t appear to move, looks glued in place.
@Moveon100014 жыл бұрын
I have a Primo's Bipod Trigger Stick and it's not at all like yours. The video is good. I just don't have any T9 bits. :(. All the kits I found online are missing the T9 bits. Just my luck. But I did find a bit that allowed me to remove the legs off and now I can work with the tube better. My plunger is stuck so tight that it won't budge. It was really corroded and dirty. I spread some WD40 into the plastic housing with the metal roller and got it cleaned up with some Carborator Cleaner and then had to wash it with some hot water and soap. Then I cleaned out each roller with a pick and then after I got it pretty clean I put some more WD40 on it and then cleaned it out with a paper towel. It's nice and clean now. But the tube inside the leg is stuck tight. I and using some PB Cleaner to try to work it loose and get it moving. I'm going to leave it overnight to see if the PB blaster can loosen it up. OK after a few days of soaking in PB Blaster and Seafoam Deep Creep the tube is still stuck and won't budge so the inside won't slide in and out as it should. I'm going to just junk this old thing and buy a new Gen 3 Bipod. I never took mine out in the rain. So not sure how it got so rusted so that the leg won't work with the trigger stick.
@gsmith99164 жыл бұрын
Great Video! Thanks!
@NoisHub Жыл бұрын
Well done! What kind of glue, epoxy did you use at the end?
@SimonGrimmer2 жыл бұрын
Good video 👍🏼
@hubby-tubadventures013 жыл бұрын
I have the tall and short gen 3 sticks. Only had them a couple of months. The tall one is sticking after about 10 uses in dry weather (shooting) and 5 uses in dry weather (camera). No soiling or mistreating. Are the gen 3 and 2 the same principal?
@martinmitchellhunter70874 ай бұрын
Was taking the leg off even necessary for this repair?
@dirkhoesch87482 жыл бұрын
Ich habe genau nach Anleitung des Videos beim Trigger Gen2 den nicht mehr arretierenden Stock ausgebaut und den innen laufenden Stab und den Spannkopf gängig gemacht. Dann wieder zusammengebaut und er geht einwandfrei. Anmerkung: Bitte darauf achten, daß der kleine Splint der die obere kleine silberne Druckschiene hält, nicht rausfällt. Der Hinweis fehlt im Video. Ist mir aber passiert und ich hab ihn beinahe verloren und dieses Miniteil hat man i.d.R. nicht einfach. Ich musste nämlich den innen laufenden Stab richtig feste mit dem Hammer frei klopfen, so fest gefressen war das Ding. Aber nach der Behandlung mit gutem Waffenöl läuft er wieder.
@kevinpostma3761 Жыл бұрын
Looks to me like you do not have to take the leg completely off to do this fix. Simply Break the Epoxy on the cap and slide the Leg off using the Trigger. Simple
@diederiklegrange72486 жыл бұрын
good video, hope i get mine right
@Micidiale8704 жыл бұрын
my trigger does not work (is frozen)...any ideas?
@user-xc9rs4py7k5 жыл бұрын
Super!
@drandrewclarke5 жыл бұрын
thanks mate. i wasn't impressed with this stick as i'm on my second and after not a lot of use the same fault happened . i will give it a go. done. don't know how they can say it is maintenance free with all that gunk in there
@des-ex-diver4 жыл бұрын
I think you convinced me to buy another stick. Took my mates apart and his was goosed on the inside full of crap. not good