Making a massive Circuit board for a table top

[@allenzackery1639]

I would put a hidden brace to the wall just so that it doesn't get weak from using regularly . Nice job 👍

[@HansSiemons]

I am usually quiet when watching video's, but as soon as you attached the legs and lined it up with the circles. The neighboors must of heard me say wow :)

[@googalsalot]

This is so beautiful. Your patience and perfection to detail is flabbergasting.

[@mattevans7884]

The level of concentration that went into making this staggers me. I admire people who can do this......I know I certainly dont have the patience to! A beautiful piece indeed

[@suecox2308]

That blue is so beautiful and so unexpected. Lovely to see the grain through the dye. The table looks like a piece of jewelry.

[@morganallen2272]

Way to put in what I can only imagine was an incredible number of hours on such an exquisite piece. Both the carpenter and the PCB designer in me appreciate this piece.

[@1959Berre]

That press is a real asset. Nothing is better for applying an equal pressure on a large surface.

[@29lookingood]

Mind officially blown 🤯🤯🤯🤯. The attention to detail is insane. The time and effort you put into that table was... well..... 🙇‍♀️🙇‍♀️🙇‍♀️🙇‍♀️🙇‍♀️🙇‍♀️🙇‍♀️🙇‍♀️.

[@OSRAM2000pc]

Art !!!!! That's it. 👍👏🏻👏🏻🐜

[@tedvanmatje]

Quality workmanship there mate! Those table legs are the best thing I"ve seen. Gods countrys finest!

[@davidcrossley7145]

That was absolutely amazing to watch. Total craftsmanship brilliant 👍

[@orionwarren4244]

That table is beautiful. One suggestion? Maybe twisting the copper around a rigid piece of copper or pipe and incorporation that into the table mount(s) might have stiffened the legs? Other than that, it's 'perfick'! LoL

[@HM-pu9zc]

You need to have that table in a living space where the visitors can see it. Hidden in a corner doesn't do justice to it. Fantastic work and great video.

[@f1rstclass289]

Absolutely awesome conversation piece. Imagine a vertical tilt table when not it use. As to spotlight it’s magnificent beauty.

[@davidward9935]

I have made and repaired a few circuit boards in the last 45 years. I would love to have that in green with silver leaf circuit patterns. I would try making one, but after having seen your beautiful creation, I could never do it justice. You have such exquisite attention to detail.

[@datruommi]

Maybe just add a couple of brackets and screw it into the walls? The compression strength of the legs isn't an issue; just the lateral movement. In my mind that would make it way more stable. It looks freaking fantastic, btw :P

[@donaldadams5342]

The time, the attention to detail & the concept are all mind blowing. Beyond that, 'words escape me'. So excellent to watch. Don from South Aust.

[@myhandydiy4471]

unreal table, not mad about the legs but i see what you were going for, i think this with much shorter legs would be more stable and perfect in the middle of a games room or something, its absolutely amazing mate

[@robertschmidt6383]

You my friend are not afraid of doing some hard work in any area of fabrication. Very cool table top.

[@Psychlist1972]

That veneer with that gorgeous blue dye and finish. Man that's beautiful

[@meetn2veg]

My God Man!!! That must have taken up a whole weekend!!! Superb job!

[@peckinpahlady]

I read the title of this video and thought it held little interest to me. I watched it anyway and I'm glad I did. It's a work of art.

[@mikek47]

That was amazing. It needs to be in the living room or on a wall as art.

[@jonmiguel]

Wall art. In a gallery or even the lobby of an engineering school.

[@sparkmeister4706]

I thought it would look good on the wall.

[@devilsadvocate1218]

Glad to see someone other than me who appreciates how good Tamiya masking tape is

[@maximr919]

This is the first time I see someone like a swinging table!

[@Manks08]

Lovely build, I like how it turned out. With the legs, to try making it a bit more sturdy how about something like a clear acrylic/resin tube through the middle of the twisted copper, leading to a flat foot? It should keep the surface steady and shouldn't be too visible, keeping the circuit board aesthetic.

[@darrelljacobjr2120]

Or just make the legs from polished stainless rod, then spray copper-tack headgasket coating on for a copper wire look.

[@grahamparsons6620]

That my friend is the dogs bol**cks, the amount of work that went into that was unbelievable but man did it turn out cool 👍👍👍👍

[@netproluis]

The board was fantastic but I was disappointed in the legs. But it's you who has to like it ...

[@stanmoderate4460]

Work of art and the attention to detail (lining up the 'pins' of the legs with the circuit board) borders on OCD😆

[@hughjasole9336]

The time you put into that....wow. I admire the attention to detail.

[@vincegregory797]

Stunning. I know knowledge is readily available but it still amazes me how you 'know' how to do everything. Even your videos are beautifully (and professionally) constructed. I share your obsessive attention to detail, I just wish I shared your artistry and talent! .......sigh.........

[@eddietowers5595]

Man that's the coolest table I've seen since the Pac-man arcade table was introduced. Great channel, Awesome content.

[@gitsurfer27]

I just came from your beautiful front door build to this, and i'm really impressed by your work. You make craftsmanship an art form.

[@davidgagnon1961]

I sat through this out of respect to all those who make custom furniture, time was not wasted. That table is amazing. I used to work radio maintenance (component level repair, including circuit board repair) and that table brings back so many memories. I truly love that table. Thanks mate.

[@robt2151]

As regards the top - speechless, although it does seem a pity to hide it away in a back room. The twisted copper of the legs resembles the 16mm cable used for domestic supply installations and that usually has a thick insulation. Maybe encasing part of the legs in a mock insulation would help to stabilise them. Also, a replica busbar partway up the legs could help reduce longitudinal movement. But certainly a very impressive outcome.

[@QuietsailorNo1]

Could you use coloured resin to replicate the pvc cover on house wiring - brown, blue. green/yellow, black or red?

[@thisolesignguy2733]

WOW that's badass! The legs were a nice touch, probably could've crisscrossed them and put a fake 'resister' in the middle to sturdy it up. but no complaints about the table, that turned out gorgeous

[@peterdelaforce2346]

Don’t know about wibbily wobbly, that is an epic build. Thanks for sharing, Merry Christmas and a Happy New year

[@Gethin_Duggan]

You have to enter that table in a competition. Unbelievably creative. Great job, thanks for sharing!

[@55ATA3]

Very cool.... The legs made it even more cool...

[@johndunacusky3332]

WON DER FULL !! I have not an other word ! Thank you so much for this video. You're an artist !!

[@richardburke2274]

This guy is on another level watched a few videos and his A genius

[@howtorepairpendulumclocks]

A great antidote to the smash it and bang it approach.

[@jagdishprasadkhaitan4815]

Awesome fantastic table you have made it.

[@jimc4731]

Absolutely superb! That would surely fetch top $$$$$. I wonder if solid copper wire would have better stiffness or perhaps inserting a solid steel bar in the twisted tubes in a concealed manner. Brass rods would be more ridged and golden in color. You should enter this in a show somewhere. JIM

[@WildeFyre69]

Well done! That is _the_ glossiest thing I have ever seen! Cheers!

[@aarondcmedia9585]

The top looks so perfect I would not want to use it for fear of scratching or marking it. Outstanding workmanship.

[@catgynt9148]

Sir, you are an amazing craftsman with an incredible artistic eye. Thanks for sharing this video. Wishing you and your family a blessed week. Cheers.

[@laconeccionvideo]

I like the table top, the legs I think should be something like PCB spacers.

[@NewYorkshireWorkshop]

ye good idea

[@leenderthollenberg1603]

I have so much respect for you you are a real Craftsman fantastic greetings from the Netherlands !!

[@jimfreeman3636]

That is insane finish work!! You just keep blowing me plumb away.

[@Preso58]

That's sensational! So many ways that could have gone wrong but you pulled it off. Regards, Mark

[@lesshoeb4843]

A beautiful job. From one joiner to another..

[@graham8854]

If I had 1% of your creativity I'd be happy. Fantastic work :-D

[@annabryantvitale9737]

True craftsman art.

[@T_B]

Birds Eye maple is my favorite!!! I shuttered when you turned it blue but can't imagine a more beautiful table and blue is the perfect choice! The clear coats on the table are jaw-dropping! And to think, I ALMOST didn't watch this because it didn't interest me initially!

[@miky-275]

Russ that table is cool as f@#k. Massive pat on the back for this project. 👍👍👍👍👍👍

[@cliveclapham6451]

I was gifted a pair of palm sanders they work great😉 Nice work 👍👍👍

[@timravo5152]

Didn't think a gaming table would interest me... being an old git... but I was mesmerized! The veneer was amazing and the finish OMG! Hope you get plenty of commissions.... what a talent! 🍻

[@78dwk]

WOW what outstanding tabel, i couldnt help to think how Huge the diodes,resistors, and all that stuff would be, LOL great design, awsome finish, now i need to check out your vacuum press build,Thanks for sharing,Godbless

[@tyremanguitars]

love the finish on this, great project.

[@skf957]

Very nice top, but I'm not so keen on the legs. I think with that fantastic design and finish, I'd have called it "wall art", and hung it! Thanks for posting.

[@howtorepairpendulumclocks]

Wow you have some great ideas and beautifully executed.

[@ivanwill]

My goodness, simply stunning!

[@ASUSfreak]

Judging by the thumbnail I was like: Nice vid! A bit of blue paint, a bit of yellow lines and some varnish. But dang seems like a lot of layers and grinding and buffing and what not... But very cool indeed (and I like hardware and motherboards etc...)

[@allbeit582]

The copper will harden on it's own eventually, but flexing the copper back and forth will do it much quicker.

[@andypughtube]

Though it won't become any stiffer in the elastic region with work hardening (the Youngs Modulus won't change) Tinning the wires would stiffen it right up, but would need several pounds of solder.

[@willyloops]

really nice birdseye maple veneer and ALL your job there....nice blue tone, nice ciano fix for veneer spots, nice lacquering (some orange skin feel, but then nice sanding on there), nice design for the board circuits ......overall....niiiiiiice !! ejejjeje congrats !! really a piece of art (and a table as well) !!

[@robandsharonseddon-smith5216]

Wow. Stunning work, and such patience

[@katepearson2730]

So talented!! LOVE your work and style! ❤😊❤😊

[@richardsedorski1206]

Absolutely stunning finish and design you are one very clever man a pleasure to watch.👍👍👍

[@horatiohornblower868]

Piece of art, but a bit too wobbly to work at.

[@allenzackery1639]

Also agree with hidden brace to the wall .. and what about the walls " paint " ??? Lol. Nice job....

[@carlhobson1578]

What a great top, some work in that. Not sure about the legs, but what a great design 💪💪👍👍

[@rayikaikin]

i love this and the copper legs look awesome but theyre so wobbly... i wonder if you could slip a peice of pve pipe over the legs for a bit more rigidity and it would just look like wire shielding

[@PaleyDaley]

You are completely insane. Love it!

[@jonhowell1000]

Stunning mint nice one inspired me much thanks man

[@marc6340]

When I saw you attaching the twisted copper legs...you are a fu*king GENIUS! Love it!

[@davegower123]

Very cool! It's a pleasure to see your creativity in action. That table top is so cool it could be wall art. Thanks for sharing! Cheers!

[@Tonyblack261]

Beautiful!

[@TheRedboy1195]

Man that is freaking beautiful, awesome job buddy.

[@badlarry172]

wow! lovely job

[@nicksainsbury7152]

Ridiculous amount of work in that and it shows. Stunning. Love how the legs fit in with circuit. The price tag though??£££ 🤒

[@spideybrent]

Hello from Yorkton, Saskatchewan, Canada. Thanks for sharing your great video’s please keep them coming.

[@michaelguglielmo2749]

That table looks fantastic! A job well done 👍

[@macedindu829]

"It looks cool as" Correct, mate. There's no word.

[@Just..........33]

Just a work of art☺

[@jakub.barzdo]

Next level, traces that are currently conducting some low voltages to power up lamp that looks like TH LED DIODE :D

[@trickster11300]

Impressive work, awesome..Love it!

[@patbird9694]

Who knew Russ a electronic nerd.

[@Beevreeter]

Beautiful work and superb finish - personally I wouldn't have bothered with that fine veneer, seems a bit wasted, and I would have edged the plywood with something solid, but your result is fantastic.

[@billbyrd9845]

That is one beautiful thing!

[@davidcarrington9458]

I'm a joiner of 36 yrs. I do like the table but the legs need more support. I would of wrapped the copper around some steel legs.

[@tamiyatruckbuilding7426]

Stunning quality.

[@marshallsuber3346]

Now that was nuts. A good nuts however.👍👍👍

[@dessertman1181]

Absolutely stunning very very well done 👍👍👍👍👍🍺

[@hobimevdeelektronik9333]

Çok güzel olmuş. Harbiden helal olsun. Çok uğraşmışsın. Emeğine sağlık.

[@lissataylor12345]

Beautiful 🤩

[@KairosGamingYt26]

Beautiful work 😍 good job 👍

[@iseriver3982]

That table has more finishes than Helsinki.

[@jamescook1364]

Brilliant !!!

[@joshdrexler8773]

Wonderful, except for the legs. Legs were an interesting idea in theory but didn't work in practice. Maybe wind the wire around polished spiral turned walnut legs, or whatever. Gold leaf is burnished with a polished agate burnisher after application to the size. Minimize the brushing, which leaves scratches, just like abrasive sanding of wood.

[@sampoynter3278]

Extremely cool... love all the finishing processes.Your finishing supplies looks like a scene from breaking bad krystal bus😉