Nice Quick Vid: MC424L Enabling and disabling Autoclose

This video shows how to enable and disable the automatic close function on the MC424L

[@abnewspk]

super brother thank you . due to you i fix one machine and got money God bless u brother

[@eduHUN]

May I ask for some help? My dog has chewed some of the cables, now I repared but struggling with the settings. I get the idea how to enable disable functions, but I wasn't able to find the right one. So, what I'd like to set is the following: click -> open -> click -> stop -> click -> close No need for holding buttons etc. I have only 1 button and a double gate to move. Oh, yes and 2 infra sensors. Can you help me, which LEDs should be on?

[@karpof38200]

Salut j ai un soucis je n arrive pas à enlever la fermeture automatique pourrais-tu m aider ? Merci

[@tristanswasbrook8420]

How do I add a button inside my gate to manually open and close. Same as how you can open and close a garage door from inside a garage with a manual button.. I've read the manual and looks like you can only use the aux for either open or close but not both.. how can i do this? What about a keypad outside the gate for guests to use? Please help.

[@niceserviceuk2402]

Good morning Tristan Swasbrook,If the control panel that you have is the one in the video above you will want to wire your button across terminals 11 and 15. 11 is the common for all inputs (+24 Volts DC) and 15 is a normally open relay that will do a step-by-step command. The step-by-step command provides a sequential command which works as follows:The first command will give an OPEN command.Whilst in motion if you give the gate a second command it will provide a STOP command. Then from its stopped or fully open position the third command will provide a CLOSE command. Whilst in motion if you give the gate a fourth command it will provide a STOP command.I do hope this has helped and that you can get your system up and running.

[@tristanswasbrook8420]

Nice Service UK thank you so much this is exactly the information I needed. I will give it a go over the weekend. Cheers!

[@tristanswasbrook8420]

Also do you know if I can buy a reciever for 921mhz rather than 433mhz? I would like to be able to send commands from my z-wave automation controller to open and close the gate. Cheers. Have you heard of homecentre 2 from fibaro?

[@niceserviceuk2402]

Good morning Tristan Swasbrook, At the moment we do not have a receiver that works on that frequency. Nice S.P.A have just purchased Fibaro, but the integration process has not been completed as of yet. Please do keep an eye out for the product when it dose come out and then we maybe able to help you directly. All I can recommend at the moment is speaking to Fibaro and asking them about their current product range. Here is the link for the main site for Fibaro: www.fibaro.com/en/. This is also a link to the contacts page for Fibaro: www.fibaro.com/en/contact/.I do hope this helps get what you want from your nice system. Best wishes,Nice service UK.