Some sites are listing the Mobula 8 with the DJI O3. Be sure to check if your purchasing the lite version or with the DJI O3 Mobula 8 with DJI O3 Available from ⤵ GetFPV - tinyurl.com/yr39dd7r AliExpress - tinyurl.com/yjbx4dwe UnmanndedTech - tinyurl.com/mr238b3b Banggood - tinyurl.com/4jf944jc ( N America Coupon "BGNick2022" 8% off) 💶💲 MakerFire - tinyurl.com/5h2bn8j4 (Coupon "NickBurns" for 5% off)💸💰💵 BTW: Found the Mobula8 Frame for $3.49 at GetFPV.
@FlyWithMe-gx1sr4 ай бұрын
great review, appreciate the work... ordered using your link and code - using this for my incoming video series "honey - i shrunk the kids - FPV Edition" 😀
@amin0_acid310 Жыл бұрын
Wow, amazing amount of Trust and confidence in that flight, not to mention nerves of steel (Zero flinching). And with an 03 even. Looking at this from Camp HDZero I'm happy to see DJI showing up in smaller form factors, and it looks like it performs well with this flight footage. Love the fast flights with this one, love the Burnz Turnz! Cheers!
@jerryFPV Жыл бұрын
Can’t wait for the mobula8 vs Pavo pico comparison ❤
@sonnivega6739 Жыл бұрын
weve waited so many years for this. Great review! sending love from Florida
@paulgeorge2099 Жыл бұрын
Love pyro drone being from Cali that's the go to store. Excellent customer service. You can't go wrong
@Wind_Rapport Жыл бұрын
Nick you've saved me so much $ over the years - Thanks for making such great, detailed videos. Gonna have to get a Mob8 over the Pico now that I know what I need to know!
@NickBurnsFPV Жыл бұрын
Great thank you for the compliment
@winder6 Жыл бұрын
Great review. You mentioned a second mounting hole for the camera it would be great to see a slow flight using the other mounting options to see if the whoops are out of view with a low camera angle. The whoops in view are a dell breaker for me.
@JAYFPV24 Жыл бұрын
Wowwwww to be honest I am reallyyy imoresss and the hobby has came a long lengthy way for this I remember my first mob 6 on analog to this woww am impressed !!!
@satoriG Жыл бұрын
Can't wait for that comparison to the pavo pico. And more general flight footage! ❤
@pirateradioFPV Жыл бұрын
She didn't even flinch 👀😆
@NickBurnsFPV Жыл бұрын
Nope, almost like she is in a trance. :)
@kibbycabbit Жыл бұрын
Mobula8 is shipped without O3 makes sense. Due to warranty coverage If Mobula8 has O3 assembled, it means O3 is activated in that country (China). You can’t get it serviced at your country. So best to buy O3 locally for proper warranty coverage. Happy Flying! ❤
@gmivisualsjason3729 Жыл бұрын
Excellent video.....The shadows didnt look as dark as usual. I just cant fly the O3 system in my woodland location which is sad. But my Walksnail handles the low light much better. As does my Hdzero as well.
@NickBurnsFPV Жыл бұрын
I have heard the O3 doesn't do low light as well. I am not all the discernable to that issue, but very common for it to be called out.
@shogunemperor Жыл бұрын
Brilliant review n awesome flying Nick!
@Dienex Жыл бұрын
Im guessing you can use this with the dji controller instead of the elrs reciever?
@FenderBender324 ай бұрын
No. The receiver on this drone is ELRS. Only the vtx is using dji (03 unit).
@MCsCreations Жыл бұрын
Fantastic flying and review, Nick! What the heck of a flying inside!!! 😃 But I think your daughter trusts a bit too much in your flying skills... I would go under the table every time! 😂 Anyway, stay safe there with your family! 🖖😊
@hubba002123 Жыл бұрын
Welder is awesome! Been using it since I saw you talk about it a couple of years ago.
@NickBurnsFPV Жыл бұрын
I don't let the tubes run dry. Works great for repairs outside of the hobby as well.
@BuddyJesus Жыл бұрын
I wonder if you could cutout an insert where the DJI O3 unit mounts and use a small silicone insert to mount the camera to. If so, I imagine it would help a good amount with camera vibrations. If not enough space, would be nice if it was gapped on each side of the camera to have some type of method to float the camera for absorbing some vibrations.
@MoeFPV Жыл бұрын
Damn Nick - IDK if I'd even trust MCK to whip that 100g fatty around me at that speed lmao great review like always
@NickBurnsFPV Жыл бұрын
The kids seem to have an abundance of faith. :)
@winder6 Жыл бұрын
I was thinking the same .
@jlarson42 Жыл бұрын
Great review. Really moves along at a good clip. 👏😎
@hubba0021234 ай бұрын
Your video was foreshadowing! I had one minor bump landing my new Mobula 8 HD and it chopped off both my O3 antennas. Sigh.. now I have to take it completely apart to put new ones on. I guess that’s why they ship you 2 pair with the quad
@JeromeDemers Жыл бұрын
So you can see the prop guards for slow flight. 😬
@ha-media Жыл бұрын
Loving forward to the side by side with the Pavo 🙌🏽
@tk-maker Жыл бұрын
wow, it fly really great with fair flight time.
@TimsDrones Жыл бұрын
Was about to purchase, when I noticed they don't have CRSF. Oh well.
@NickBurnsFPV Жыл бұрын
we don't see to many micros with crossfire. In this case we would need to add the crossfire rx to the quad.
@TimsDrones Жыл бұрын
@@NickBurnsFPV I fly an M75 1s Avatar with CRSF on it.
@TimsDrones Жыл бұрын
Would be hard to do CRSF, without a proper FC BF ID for CRSF Rx. Would have to dig up some docs too, for figuring out how to disable the ELRS and wire up the CRSF Rx (any spare UARTs avail?). Gonna pass on this - unless i switch to ELRS someday (unlikely - as my CRSF always binds, updates, etc., without issue).
@NickBurnsFPV Жыл бұрын
@@TimsDrones In betaflight I see 4 uarts with 2 in use.
@juhanaleiwo Жыл бұрын
How about a piece of zip tie and some heatshrink over the antenna leads, so that the zip tie piece sort of braces it against the chassis while the heatshrink holds it on the antenna wires?
@NickBurnsFPV Жыл бұрын
yea, we can diy something
@SpartanOfLuxon Жыл бұрын
I think its important to note that the Pavo Pico is an 80mm and the Mobula8 is an 85mm in the comparison video
@KOrnhOliO1 Жыл бұрын
Please also note even though the smaller Pavo Pico is an 80mm, and not 88, like Nick measured, it weighs close to 20 grams more! BetaFPV always seems to have weight that isn't needed. Their first original DJI whoop was way, WAY too heavy. I built one of my own and saved a ton of weight off what they came up with. Happymodel, on the other hand, has always championed low weight in all of their whoops. Glad to see a manufacturer GETS IT!
@SpartanOfLuxon Жыл бұрын
@@KOrnhOliO1 I'm not sure what you are referencing as the Mobula 8 in this video weighs 83g and the Pavo Pico weighs 72g. BetaFPV clearly say that in their website and Nick clearly weighed it in his video of the quad.
@The_Pub_ Жыл бұрын
How do they put up with it... Crazy, but awesome. Lovin your Home and yard, you've done so well from the old swing set , no pool. I might have to sell up here in Sydney and buy 3 houses with larger yards in the States...
@big-smoke-rc Жыл бұрын
I thought the other unused holes in the canopy were to fit a vista and camera (it's a multi purpose canopy).. Felt sure you couldn't use the other holes for the same camera as there isn't room for it.
@aythixfpv Жыл бұрын
Only nick could fly such a thicccc build inside like a racer lol. Thanks for the content 🙏
@bbuilder101 Жыл бұрын
Comparison video, Pico vs Mobula 8!!! Keep up the fantastic work!
@Mupshot Жыл бұрын
I had rotten luck with the mob 7 snail version. Im considering replacing it with the 8. At that size, I think 1s isnt really viable so Im glad to see that these are 2s
@NickBurnsFPV Жыл бұрын
What happened to the mob 7 WS?
@Mupshot Жыл бұрын
@@NickBurnsFPV The sky unit is just unflyable. even with a new LH singularity antenna on the unit and upgrades on the goggles, I cant get more than 30 yards out even at max power. I get 500ms latency and loss of video. My guess is the sky unit is either defective, or as the walksnail discord suggests, it needs a BEC. but its a BNF, so Im not willing to tear it apart. If it were a build, I would exhaust all options.
@NickBurnsFPV Жыл бұрын
@@Mupshot That sounds like a defective walksnail vtx. I have used a number of these vtx without a bec or capacitor.
@Mupshot Жыл бұрын
@@NickBurnsFPV unclear if it was the VTX, or the FC didnt have the amps on the 5v rail. or maybe a manufacturing defect. it was a BNF, so not my place to tear it apart and swap to figure it out. but Tiny whoop replaced it on RMA and the replacement is performing as expected. submitted week 8 igow footage with it.
@NickBurnsFPV Жыл бұрын
@@Mupshot tinywhoop is awesome!!
@Adel_k. Жыл бұрын
Whats the range that you can get with it? Can i dive big buildings? Can i go pretty far like 100 meters (enough to rip a good spot?)
@NickBurnsFPV Жыл бұрын
elrs range is outstanding. yes, it can dive buildings, pretty much all drones can.
@Adel_k. Жыл бұрын
@@NickBurnsFPV Thanks
@MeBoazz Жыл бұрын
Yes thank you i'm buying one
@FlyingBeeFPV Жыл бұрын
Thank you so much for the Review! Perfect on point as always. Now i think I am ready to decide between the Pavo Pico and the mobula8. Thankyou also for your honest and straight words. Since I Am the perfect customer for the cinematic Pavo and mobula comparison i will have to wait for your second video before i place my order. Ifat all possible i would love you to address 3 points. Loudness, jello, props in view. Can't wait for the new micro addition to the Avata.
@SunriseWaterMedia Жыл бұрын
You were ripping that little thing! 😅🤘
@lynxfpv Жыл бұрын
😮 wow 😳 the power of that whoop is insane! That is super cool 👍👌😎
@ultrazep Жыл бұрын
This looks like the perfect backyard cruiser.
@NickBurnsFPV Жыл бұрын
It very well could be
@Catiadr Жыл бұрын
Hey Nick, zip ties make great antenna supports.
@NickBurnsFPV Жыл бұрын
Yes they do, with a touch of heat shrink. I was thinking of something a bit more refined happymodel could do.
@MrCrowleyandhisdrone Жыл бұрын
You are my fave pilot. Cool quad, you broke it 😮. Great review
@noscadefpv4954 Жыл бұрын
Always great reviews,I don't know if it's my connection but while you were flying slow along the fence line it looked kind of choppy?Anyway great review.
@NickBurnsFPV Жыл бұрын
Might have been a temporary issue. Mine is playing find on desktop and mobile.
@c_labb9247 Жыл бұрын
Seems like you could do this with a vista as well. Finally a Dji whoop. Can you add a crsf to the board if we don’t have ELRS?
@NickBurnsFPV Жыл бұрын
yes, this particular mount in more O3 centric but does have the holes for vista/link.
@AKtoTok Жыл бұрын
Thing looks like a blast, just put an 03 on my cinelog25 and loving it.. makes me want one of these 😅
@aliveathome Жыл бұрын
Ordered the O3 Lite-version. Can't decide if I'm going to buy an O3 unit separately or Runcam Link Falcon Nano and save about 10 grams? Ability to record in 4k vs a lighter quad...decisions decisions 😂
@jeffwinder70109 ай бұрын
Nick, I have designed a cinematic 'suspension no-jelly kit' for this little guy.. :). No need to review or anything, just would like to send to you as a way to give back as I really enjoy watching your videos ... I have learned a lot from all your work.. If my name looks somewhat familiar, I'm one of the Doinker/swirle designer guys of years ago lol. So, I'd like to send this kit to you if you're interested... or perhaps you will do a 'how to eliminate o3 jello' on these little new breeds of o3 micros video and this may be helpful. Kit also has a battery pack mod to 'nicely' fit all of the gnb 660's to 850 2 s nicely .. and ability to add a lost model alarm.. PM me if you would like.. I think it's a really nice addition to an already nice mico .. one of my favorites to fly now. Happy to do this.. Thanks Again. -Jeff Winder (y)
@NickBurnsFPV9 ай бұрын
Hi Jeff. I am interested, I do think it could be useful as these sort of cinematic flyers are way more popular than I ever thought. I sent a message on FB messenger. At least I hope I have you on FBM. :)
@diesertimkoenig Жыл бұрын
Great Video as always!
@timmytfpv73164 ай бұрын
This is like my house i fly like a mad man with a whoop as the family and dogs just sit calm like nothings going on lol
@NickBurnsFPV4 ай бұрын
Pretty fun right?
@thejohnjosh9 ай бұрын
Damn I wish this came with a CRSF receiver
@Shauny_D Жыл бұрын
20:00 all my usbs look like that! haha just did it on a new one with my pocket knife out at a farm
@austinbaker75997 ай бұрын
I’m torn between this and the Darkstar 20 I’ve had much success with Happymodel prior but this is too much $$$ to make a mistake. Mostly flying around a court yard
@NickBurnsFPV7 ай бұрын
my favorite for 2inch 2s with dji O3 is the flylens 85. Here kzbin.info/www/bejne/f32yeHlnerOGjs0 I also did a roundup here kzbin.info/www/bejne/bmjTknmhnb9_f7s
@notseemike713710 ай бұрын
Now them are some damb good drone frying skills I wish I had that much control
@NickBurnsFPV10 ай бұрын
just fly and have fun. Our skills develop at our own desires and flight time.
@Phi_Lou Жыл бұрын
Great work thanks man, does it work with the dji controller 2?
@NickBurnsFPV Жыл бұрын
I don't have one to test with but yes it should has that controller will bind to the O3, but we will likely have to make a few betaflight configuration changes to make it use the sbus for use with that controller but the hardware is all in place.
@onclefly8450 Жыл бұрын
Ni Nick, great review, for me the best analog, after Avatar, and 03. 😉
@NickBurnsFPV Жыл бұрын
best for performance I do agree.
@bestfield372 Жыл бұрын
That video picture amazing love your videos
@MrBumbles2 Жыл бұрын
yea its broiling here in Eastern NC 123 heat index today . need a fan on my 04x module , seems to have that rolling issue more in the heat , never one problem below 80
@NickBurnsFPV Жыл бұрын
ouch 123 heat index is nutz. Walk outside and sweat standing still. Ick.
@MrBumbles2 Жыл бұрын
@@NickBurnsFPV yep live in the pool
@calvinstephenson39207 ай бұрын
Great video. Would I be able to fly this with the DJI remote that has the on screen version. I have the DJI Mini 3 with that remote but looking for a drone that’s more fun.
@NickBurnsFPV7 ай бұрын
I am not sure, I lean toward no. I believe it would need to be the same remote as the DJI Avata comes with.
@calvinstephenson39207 ай бұрын
@@NickBurnsFPV thank you for the quick reply.
@buckmtber_fpv Жыл бұрын
Great video Nick! I went and bought one and love it. Do you have the OSD HD option in Betaflight? I got mine with the 03 already installed and it has BF 4.4, but HD OSD isn't even an option and can't get HD view in my Goggles V2. Any ideas?
@NickBurnsFPV Жыл бұрын
No, Mine has betaflight 4.3.2 which doesn't have the HD osd. Here is a write up on hd osd www.firstquadcopter.com/news/betaflight-4-4-hd-osd-gps-rth-and-more/#:~:text=HD%20Digital%20OSD%20(DJI),-HD%20OSD%20is&text=If%20the%20OSD%20option%20alone,option%20will%20automatically%20be%20selected.
@hubba0021234 ай бұрын
Where do you find Welder glue these days? I bought it several years ago when you were talking about it but now I can't find it on Amazon.
@NickBurnsFPV4 ай бұрын
Your right I don't see the classic I have been using for years. Hopefully its a temporary supply issue...so strange. E6000 is a reasonable alternative.
@hubba0021234 ай бұрын
@@NickBurnsFPV You were right... it is the best. I hope it is temporary. I use that stuff all the time. Down to about 1/4 tube. sigh..
@m00st Жыл бұрын
Great video, super helpfull as always
@scole9019 ай бұрын
my mobula8 fly's like a brick, very stiff. yesterday i flew the mobula8 then i flew my babyhawk, wow what a difference, the baby is so much more fluid and responsive.
@NickBurnsFPV9 ай бұрын
the mobula8 with O3? could be the canopy is squeezing the flight controller gummies to decrease the vibration dampening.
@scole9019 ай бұрын
hey nick whats up man, it was in horizon mode, in my goggles it says angle mode. i flipped the switch to acro i think and man did it loosen up, holy cow. i gotta get into beta and check my switches. take care man
@NickBurnsFPV9 ай бұрын
@@scole901ah yes, I forgot about angle mode. Its so rare for me it didn't come to mind. Good find.
@scole9019 ай бұрын
turns out it was in angle mode i went in and added horizon, much looser flying. acro is too loose. why is angle mode so stiff@@NickBurnsFPV
@NickBurnsFPV9 ай бұрын
@@scole901 angle mode limits the angle of pitch and roll we can put the drone in. We can increase that allowable angle inside betaflight. Its like a training mode.
@orim8349 Жыл бұрын
Good review 👍 What's the point buy this instead of cineon C20?
@NickBurnsFPV Жыл бұрын
I can only imagine those that would want this over the c20 is the overall footprint size, smaller batteries, and lower flight weight. Maybe noise as well.
@orim8349 Жыл бұрын
Thank you for your reply 👍 That would be great if you can do video to compare those two and share your thoughts. Have a good day 🙂
@hubba0021234 ай бұрын
Did the GNB 550 batteries fit in the battery cage for you?
@NickBurnsFPV4 ай бұрын
The 550 I show in the video is what I used.
@MikeyFPV5 ай бұрын
I got mine in the air but all the tuning presets ive tried do not perform anything like what i see in this video. Ive tried tweaking my settings but im not finding a good spot. Its almost like youre flying in angle mode, but you can do flips on demand. Can you please post the betaflight pid/rates you used in this video Nice flying!
@NickBurnsFPV5 ай бұрын
The pids and filters are stock that came on the quad. There is a section of the video where I discuss the need for proper mounting of the O3 and tightness of the mounting.
@willfpv4475 Жыл бұрын
I thought I was about to see the IGOW week 7 trippy spins in this video, haha!
@NickBurnsFPV Жыл бұрын
Nearly, but not really 🤣
@minaexperiment Жыл бұрын
Great review. What rates do you use?
@NickBurnsFPV Жыл бұрын
Here is a video on my rates. I use the same setup for every quad. kzbin.info/www/bejne/op3TeZaNht1rp5o
@JonR35 Жыл бұрын
Anyone else keep losing LQ on elrs mobula 8 and it drops from sky? So frustrating
@scole90111 ай бұрын
thanks for the video my mob 8 03 wont connect to beta flight, what can i do
@NickBurnsFPV11 ай бұрын
It can be so many things. What have you tried? First quad? have you downloaded and installed the drivers linked on the front page of the betaflight configuration application?
@cristian_cАй бұрын
Is this flying better than darkstar20? Thx
@NickBurnsFPVАй бұрын
I think the darkstar20 flies better for flat slower flight, but this is more acro capable.
@Justinl1208610 ай бұрын
Do you know if the FC is plug and play for the O3? Curious to know if I could just buy this and put my o3 from another quad in this frame easily.
@NickBurnsFPV10 ай бұрын
yes it is. At least as it comes as the mobula 8, O3 ready.
@Justinl1208610 ай бұрын
@@NickBurnsFPV thanks!
@NRG19919 ай бұрын
Hey nick, is there much Lower range with these o3 antennas? I think about to change it on my little 2“ quad if it’s not that bad 🤗
@NickBurnsFPV9 ай бұрын
I really can't comment on range, as I don't range test anything. Range testing is a problematic area of regulations. I suspect the greatest impact to range is the receiving antenna on the goggles.
@NRG19919 ай бұрын
Okay, Thank you 😊
@Taboloncawonthemasters Жыл бұрын
Which do you prefer for your flight style, the moblite 7 hdzero or the mobula 8 hdzero?
@NickBurnsFPV Жыл бұрын
Inside or outside?
@realwildman Жыл бұрын
I'm not ready to go Digital yet, I curious about putting a analog camera/VTX on the lite version.
@NickBurnsFPV Жыл бұрын
There is an analog version readily available. I have the review linked in the video description
@profit626810 ай бұрын
If i have dji goggles 2 and i got this happymodel with 03 would it be compatible
@NickBurnsFPV10 ай бұрын
the goggles 2 is specifically for the O3.
@big-smoke-rc Жыл бұрын
I've just bitten the bullet and gone digital with this model and some v2 goggles. 😅 it's a good price for a rtf with o3. Batteries are impossible to find in stock in this shape though! Do you suppose a modification would be possible with a 10mm strap? Thanks for the video.
@NickBurnsFPV Жыл бұрын
yes, we can clip off part of the battery tray and use a strap.
@definingslawek4731 Жыл бұрын
The pico has a lot of jello which is totally unacceptable for someone wanting to use it as a cine whoop for filming festivals or anything at all. Does this one have jello too?
@NickBurnsFPV Жыл бұрын
Did you see jello in the video?
@Woodyyes-- Жыл бұрын
Combining with the flywoo naked o3???
@NickBurnsFPV Жыл бұрын
maybe one day. The nake o3 is so new I only see a kit, no entire naked O3
@ha-media Жыл бұрын
I'm definitely sold 🙌🏽🙌🏽
@BREACHERCAT Жыл бұрын
Recently saw something called ACK75 O3 on Taobao and got some video on KZbin as well (in Chinese), any chance you can get one and review it? Love to see you fly man!!
@NickBurnsFPV Жыл бұрын
Looks like its a kit and/or a conversion kit for the mobula7. Don't really have it on my radar but I will give it more thought.
@lemonsquareFPV Жыл бұрын
The Attacking Chicken frame is great for analog and even okay with HDZero/Avatar. BUT anything heavier than that would be terrible. My HDZero build is ALMOST too heavy to be fun… and I prefer the ultra light 2S analog build: 1002 18k /w GF1608s Happymodel CrossF4 5A 2S sub 1 gram VTX/antenna Dual BT2.0/A30 pigtail /w 2X Tattu 300mAh batteries
@kurtzFPV Жыл бұрын
I love happymodel, but do you really think you'd fly this inside on the regular? And if flying outside, why would you want the prop guards? Just turn on betaflight crash recovery on an open prop.
@NickBurnsFPV Жыл бұрын
No I don't think I would fly it inside much. I prefer to fly analog inside, this is why the discussion is primarily about the O3 image quality. So many have dji goggles and no analog.
@kurtzFPV Жыл бұрын
@@NickBurnsFPV yes. I forget about some only having DJI. I built a naked vista whoop that I thought I'd fly indoors, but hardly ever pull it out. I know you love the 75mm analogs for inside and I love the 65mm. I do have an 03 pavo pico, but as a specialty for smooth filming indoors and close to people only. I personally find it being a little underpowered makes for better indoor cinematic stuff, particularly throttle control, and I still need more practice on that.. At least for me.
@gsgiantridered396 Жыл бұрын
I'm a bit surprised that we now see more & more smaller 2s whoops with the O3 system which is heavier than the Vista system... which was considered by most to be too heavy already.
@NickBurnsFPV Жыл бұрын
I am curious of this as well. I suspect there is a "newness" of the O3 that has gained manufacture attention for some reason. I do get a fair number of questions/comments from people who seem to be avata flyers. Often asking about using the goggles 2 and dji controller on these.
@gsgiantridered396 Жыл бұрын
@@NickBurnsFPV Avata flyers... then yeah, that makes sense. Sooner or later they will also learn what extra grams do to the fun factor & flight times on a small quad :)
@NickBurnsFPV Жыл бұрын
@@gsgiantridered396 yes, as they get more involved, if they continue, they will learn either weight is holding them back in flight time or agility or be satisfied.
@CompuTableUI Жыл бұрын
Can you use the DJI remote control 2 with this setup (disable elrs)?
@NickBurnsFPV Жыл бұрын
Yes, I don't have one to test, but the dji remote control 2 and the o3 are compatible. Likely need to change some betaflight configuration
@djcrank4life Жыл бұрын
Amazing link to batteries for mobula8 please :)
@NickBurnsFPV Жыл бұрын
GNB batteries are available from so many web shops. Pick your favorite and search for GNB 2s 550mah.
@bleugt11 ай бұрын
I didn’t think the O3 had a microphone. Can I ask how you’re getting the audio?
@NickBurnsFPV11 ай бұрын
flight audio is recorded with a secondary camera and brought into the edit. I cover this from time to time in my videos but not every video
@Sidiann Жыл бұрын
How is jello with this? I’m trying to decide between this and the Pavo pico. I saw that the jello can be quite bad with the pavo pico
@NickBurnsFPV Жыл бұрын
Do you see jello in any of the 4 flights? I always suggest everyone use their own visuals to identify such items. Relying on me could be a mistake.
@Sidiann Жыл бұрын
@@NickBurnsFPV thanks. I don’t see any I don’t think
@mot1thom2 ай бұрын
Is the o3 only compatible with DJI goggles?
@NickBurnsFPV2 ай бұрын
Yes
@mot1thom2 ай бұрын
@@NickBurnsFPV bummer, thanks for the reply though! Do you prefer the googles 2 or fpv v2? Or I guess they’re up to 3 now? 🙃
@NickBurnsFPV2 ай бұрын
@@mot1thom I have been using the goggles 2, I don't have the newer set. My original dji goggles are the v1 and doesn't work with the O3...or at least I don't think they do.
@sunsetpark_fpv Жыл бұрын
Nick - First of all, you RIPPED the hell out of this quad! Awesome flying indoors and out. 😎 Second, I find it very endearing that you rip quads through the house and your kids have no issues with it. 🥰 Third, as far as you talking about the antenna, I visualized a very simple 3d printed part that would snap in and protect them. Basically, an extruded half circle undereach antenna, connected to a rectangular extrusion (extruded side to side instead of front to back) with two "cut outs" where the antenna are......it would click right in.....
@NickBurnsFPV Жыл бұрын
Thank you. Yes the kids are pretty jaded, somewhere during the last 7 years of flying inside they are not bothered. Your thoughts on a clip in antenna support is a very good idea. I am not much of a designer, hopefully someone will design something similar soon, or HappyModel will take up the concept.
@rockfordian239 ай бұрын
Will this work with walksnail?
@NickBurnsFPV9 ай бұрын
No anything with the DJI O3 requires the dji goggles.
@ashih4 Жыл бұрын
what is the maximum speed
@NickBurnsFPV Жыл бұрын
no real idea, I don't measure and its rare a concern in traditional fpv. A guess, 40-50mph
@wlad792 Жыл бұрын
Hey! I'm currently using cetus x for indoor flights and it is super quiet. Could you please compare how Pavo pico and mobula8 sounds inside the house with samples? Appreciate your work!
@dondupuis4007 Жыл бұрын
Great videos I enjoy watching your videos, thank you! Are you using DJI goggle and controller for the flights with mobuls 8
@NickBurnsFPV Жыл бұрын
Inam using the dji goggles 2 but not the dji controller. I use the radiomaster zorro radio. We could use the dji controller with a few betaflight changes.
@AmishGuyWitWiFi Жыл бұрын
Can anyone confirm if the DJI FPV RC2 controller would work with the lite version of this (purchasing the O3 seperately later)? Sorry if its a dumb question, im new to this!
@NickBurnsFPV Жыл бұрын
yes
@droningjudah Жыл бұрын
What Batteries do I need to fly this whoop?
@NickBurnsFPV Жыл бұрын
I show the batteries in the video. Gnb 2s 550
@GelFPV Жыл бұрын
Hi sir what is the best battery for mobula8?
@NickBurnsFPV Жыл бұрын
I show the batteries I use in the video. Best is something i can determine for someone else. Best can mean so many different things to different people.
@GelFPV Жыл бұрын
I mean for all the 3 batts that you use? Gnb yellow and green are only available here Gnb green is 3grams more vs yellow Do i go for yellow?or is it the same?😊
@NickBurnsFPV Жыл бұрын
I think the green is better. @@GelFPV
@GelFPV Жыл бұрын
@@NickBurnsFPV thanks sir! Nice review also =)
@leomatis_ Жыл бұрын
pavo pico or this?
@NickBurnsFPV Жыл бұрын
Depends on the purpose. Slow or fast, inside or out
@Axe_FPV Жыл бұрын
did you use DJI RC2?
@NickBurnsFPV Жыл бұрын
No, I don’t have one to use but the O3 is compatible with it. We would need to make a few betaflight changes to use the O3 as the remote/radio
@jovid7 Жыл бұрын
Great review Nick. Does the lite version come with a plug for the 03 harness and can you just use the DJI controller instead of Elrs.
@NickBurnsFPV Жыл бұрын
It does come with a wiring harness and a connector for the O3. We could use the DJI controller with a few changes to the betaflight settings to use sbus on the O3 rather than the onboard ELRS receiver.
@jovid7 Жыл бұрын
@@NickBurnsFPV Thanks Nick. Been watching your channel for many many years. Thanks for all the great reviews. Flying a 2 inch with basically a go pro around your house. Can't believe we're here.
@NickBurnsFPV Жыл бұрын
@jovid7 While not easy or really beginner friendly, yes that is were we are 😁
@Stream486lavish Жыл бұрын
Lol the trust that person has in you tho!! 😂
@NickBurnsFPV Жыл бұрын
She has been subjected to my inside flying for so many years without incident, she and the two others aren't bothered. :)
@Stream486lavish Жыл бұрын
Haha Respect!!
@ChrisParayno Жыл бұрын
I cant wait fory version to come in as ive veen looking for a smaller cruiser for a while!
@NickBurnsFPV Жыл бұрын
Sorry, which version? I suspect we have a typo with "fory".
@ChrisParayno Жыл бұрын
@@NickBurnsFPV*for, yes typo. Yes this "lite version" as I happen to obtain a free o3 for free. I like the larger size over the betafpv version.
@enricobononi8655 Жыл бұрын
i got sick in the first few minutes of the video.....
@DriftaholiC Жыл бұрын
Now I wanna build a 3S version with their CRAZYF411 AIO. Looks like it will fit. Though I wonder if 95mm would be a better fit?
@NickBurnsFPV Жыл бұрын
Better depends on flight style, desired flight characteristics and environment
@MysteryD Жыл бұрын
VTX antenna mounting solution is non-existent. Is that a single copper wire receiver antenna? Seriously?? They could have done SOMETHING about these issues.
@NickBurnsFPV Жыл бұрын
The copper wire isn’t to unusual, it does keep the height down over something like a cube antenna
@MysteryD Жыл бұрын
@@NickBurnsFPV I know it works perfectly fine. But there's zero protection that way. I'd at least cover it with some heat shrink