Nicrew Dual Channel LED Light Timer Instruction Video

Nicrew Dual Channel LED Timer - Compatible with Nicrew ClassicLED Gen 2 Aquarium Light
If you still have puzzles about the setting, please contact us at [e-mail] or leave a comment.
Link to Amazon Product: www.amazon.com...
Link to Official Website: www.nicrew.com

[@craigyoung8692]

Life saver. Couldn’t find a manual anywhere for the duel one. Just the single. Cheers

[@rhondadunn4228]

Do you sell a better timer because this is ridiculous? I honestly wish I had of purchased one that was easier to use.

[@oranje1340]

Can you please have a tutorial with voice? And be specific

[@myrrhavm]

No kidding. Channel one is which LEDs? Channel two? If the person doing the setting doesn’t want to speak, have someone do a voice over. Seems as things supposedly get smarter, people get dumber.

[@slooze6281]

It’s actually really simple guys. Make sure you have the plugs in the right channels. Channel one is just the yellow light, and channel 2 is the blue light. If you run the yellow and blue at the same time it’s stronger and more of a white color. Run just channel one in the morning for an hour or 2 then add in channel 2 till however long you want because that’s the blue. Just have channel one turn off whenever you want the blue light to turn on.

[@kristalynn7877]

Hi 👋 How do you set it if you only want to use mode 1 for blue/white and F1 for sunset? so skipping over mode 2 altogether. In order to get to FI/F2 settings it makes you do a timer for mode 2 but I don’t want to use mode 2 at all. For mode 2 do you just enter in a bunch of zeros if you don’t want to use it? Or would that mean they’d go on at midnight ?

[@mjhorner1496]

This video was sort of helpful. I just don't know why it was so hard to figure out. Seriously it's like you guys tried to make something difficult to use.

[@chrisgraham8711]

I've read the instructions and watched the video, seems easy enough but not even sure what I did. I just want the main lights to come on at say 8am and go off while only the blues stay on for the next hour before everything turns off

[@traceyxxrose7454]

Did you ever figure it out?

[@seamusmcanulty3904]

For real this thing sucks

[@davidjennings7656]

So I went to buy the 100 watt nicrew says won't work with timer but see videos of ppl using it with there 100 even links are same as what I Wana get will it work with it??

[@marpinteacup6395]

Tip: If your power goes out and your LED strip flashes on but then only has a few lights barely lit up, unplug it from the timer, make sure the brightness is set to 100, hook the LED strip up again and turn it on. It should work again. Adjust brightness as needed. This is usually what happens to me after the power goes out, my small Nicrew SkyLED will have issues, but using the above directions usually gets things sorted.

[@tomtom369963]

Thanks! Makes sense, gonna buy it forsure

[@jonathanpineda6759]

Here to simplify it for you guys thank my later. -Channel one is all blue leds. -Channel two is all white leds. If you want both on at the same time when setting up the timer make sure you put both to turn on at the same time and turn off at the same time. If you want one of the colors off completely just set the turn on and turn off time at the same time. (Example if you don’t want whites set it to turn on at 12:00 and to turn off at 12:00. If you want blue light at night just set the blue channel to stay on longer than the white.

[@pitakid10]

How about adjusting brightness without the use of the timer?

[@davidjennings7656]

Do you have a link for a timer for the hyper reef 100 plsssss

[@RiceRocketsYT]

Why can’t I adjust the brightness in the main lighting setting?

[@tianasummer4230]

HOW DO I CHANGE THE COLOUR MINE IS STUCK ON RED

[@laurentiuvintila]

What min/maximum voltage and amperage does this LED timer support? Thx.

[@passenger3]

Thank you

[@eliezerpanesa2153]

Do you have a timer compatible with Hyper reef? or can you recommend something?

[@kensantosyt]

@nicrew, will this dual variant work on two separate led lights? I would like to have the lights on my two tanks light up at the same time

[@nicrew595]

Hi Ken, the end of the controller just has one barrel cord to connect with the power supply. Your power supply needs to load the output of 2 lights, or it cannot connect with them.

[@TheOpelkoenjas]

Thanks!

[@PhD-JWT]

Just received my 30-36” saltwater reef Nicrew. Two comments. 1, the mounting brackets move too easily. You should figure out a way to stabilize and lock mounts in place. Second, remote control or app functionality will take this light to a whole new level. Overall, you can’t beat the price! Thank you

[@chrisgraham8711]

are you still using this light ? I just got mine today and instructions are a little weird

[@PhD-JWT]

@@chrisgraham8711 yes. I use the blue lighting. There are KZbin videos on how to set it up. Once it’s done, it’s good

[@oliviahengel9769]

How do you program the red, blue, green, and white individual percentages?

[@thakidistight]

You dont. This is a timer it doesnt control the spectrum.

[@Amare-fidem-spes]

How can you use it on multiple led lights?

[@itsreallycheyTV]

I’m still lost. Could have at least explained as the video went along instead of just pressing buttons

[@feistyfish3178]

This video only confused me more 👎🏼

[@mantisrl9896]

Thanks for the video, literally couldn't be easier, I don't understand how people can be so confused by this controller.

[@banks2993]

Can this control two 50w hyper reef at same time ?

[@nicrew595]

Dear customer, I am so sorry this dual-channel timer cannot control the HyperReef 50, 100 and 150. If a customer own the HyperReef 30, he can purchase this timer for connecting. The HyperReef 0-10V controller may be released in April. Thank you again for your understanding and support.

[@JoeSemary]

I can't figure this shit out!

[@nicrew595]

Hi Joe, thank you for your feedback. Could you please tell me what problem you have when programming it? You could feel free to contact us at [e-mail]. We will help you fix the issue.

[@Socalshortybulls]

What is F1 and F2 and what is the setting used for?

[@tesusreef2625]

Set f1 for a sunset when the lights are going out. F2 is the lights just go out. No dimming

[@tesusreef2625]

@@pinaibig Set f1 for a sunset when the lights are going out. F2 is the lights just go out. No dimming

[@net200777]

Why is it so difficult

[@nicrew595]

Dear customer, thank you for your feedback about NICREW product. Could you please contact us at [e-mail]? You could describe your issue which you have when you were going to set the timer. We will go over some troubleshooting methods for you.

[@tarrasmith1341]

Is it hours on and off to make 24 total hours in a day, or just military time?

[@reaj9195]

what do the two channels mean?

[@vexy1987]

Nicrew lights have two light channels, white and blue.

[@myrrhavm]

But which is which? I think that is what Reaj is asking, correct?

[@craigsmith6893]

Can this dual timer be used with two different LED lights for two separate tanks at the same time?

[@nicrew595]

Hello Craig Smith, thank you for your message. We would like to contact you for more details about the timer compatibility. Would you mind contacting us via [e-mail]? We will help you solve the problem soon.

[@aznblueboi916]

Did you get a reply? Im looking for the same answer. I want to power 2 different lights both with are single channels.

[@nicrew595]

​@@aznblueboi916 Hello Jason, thank you for your review. Yes, this controller could be used to connect with 2 lights at the same time. Please make sure the voltage and amperes of your power supply will meet the requirements. For more information, please feel free to contact us at [e-mail]

[@craigsmith6893]

@@aznblueboi916 Hi Jason. Just noticed your message. After contacting Nicrew I was advised to not connect 2 lights at the same time as it can overload the timer (which could be possible thinking about it) I was hoping to power two of the Fluval Spec Lighs (one for the 19L Spec LED and the other for the 10L Spec LED) at the same time with this one duel Nicrew timer. I see your reply from Nicrew says different. Did you have an further information from Nicrew regarding this?

[@Kankritically]

I’m having trouble getting mine to change intensity could anybody help 😭

[@rhondadunn4228]

Also I have set my timer but it doesn’t change by itself.I still have to change it manually. The timer is absolute junk

[@kraftycbr01]

I am on my third unit. the first one I bought worked for 3 or 4 days and then crapped out. I returned it. I ordered another one that one would not even turn on. I returned that one. ordered another one and this one won't even turn on.. garbage. I have a cheap no name from China that works much better than these. I thought it would work a lot better since it's the same manufacturer as my light

[@CronicXImpulse]

why did you make this so damn confusing

[@anthony2jze]

This timer trash it dont work