why cant i simply find someone who did this job and ask them wealth of knowledge
@RVURU13 күн бұрын
Thanks. Cheers
@jordan-leemccarthy88055 ай бұрын
Thanks for this video. Very informative
@migueltejeda44410 ай бұрын
Gracias por el video, gracias a él pude solucionarlo en mi camara...
@RVURU10 ай бұрын
Me alegra saber que te sirvió Miguel! Saludos!
@RVURU10 ай бұрын
@@jogrev suerte!
@MichaelDiblicek3 ай бұрын
😄😄👋👋Thanks a lot for this video, i had the same problem with a Nikon FM that i bought several months ago. Everything worked perfectly when testing all the shutter speeds. It was only recently that i bought a Nikon MD12 Motordrive, i attached this and then started going through all the different shutter speeds, 1000 ok, 500 ok, 125 ok, Suddenly when i hit the shutter button on 60th the mirror locked up, and the motordrive wouldn't advance, so looking here on KZbin i found your video. I watched it fully 5 times before deciding i will give it a go, i tried on 7 different occasions, and viola suddenly everything clicked into place. Perfecto :) The camera is working perfectly as before although i have not tried with the motordrive for the moment 😀Very simple in fact, 6 screws, a brass plate removal. I am still not sure what i did in fact, but i obviously did something right poking around. Anyway many thanks for explaining in detail each step, and especially all the close up camera work.
@RVURU3 ай бұрын
Michael, I’m very happy you found it useful and helped you out. Cheers!
@MichaelDiblicek3 ай бұрын
@@RVURU Thankyou, thankyou. You saved me a lot of money.😁
@jogrevАй бұрын
Gracias por el video. Tengo un modelo FE pero con un serial mucho mas reciente que el que presentas en las imágenes, comienza por 37, la que muestras, en 32. No solo eso. Mi modelo es completamente diferente en el mecanismo del obturador. Por ejemplo, la platina dorada que aparece en 1' 58", es mas alargada en el punto donde está el tornillo que está en dirección a la montura del lente. Al lado de ese tornillo, hay otra pestaña por donde pasa un mecanismo que no posee el modelo con el que trabajas. Así que debo investigar cómo solventar el problema en mi modelo. Gracias de todos modos. Una pregunta, ¿usaste algún producto para limpiar y luego lubricar?
@RVURUАй бұрын
Gracias por tu comentario! Use solvente para limpiar primero y luego aceite de máquina de coser. Ahí lo muestro durante el video. Suerte con tu máquina! Un saludo
@user-io6mg5hy6o6 ай бұрын
Its really hard to understand what did u do? U just press something there in the hole.. I have the same problem, but I cannot fix like u do.
@RVURU6 ай бұрын
Hi! I suggest you look at the video slowly and completely. I´ve explained it with the best images I could make. Also, take into account that some skill is required to troubleshoot a camera, and I don´t suggest that everyone can do it. Best of luck!
@user-io6mg5hy6o6 ай бұрын
@@RVURU where are u from?
@RVURU6 ай бұрын
@@user-io6mg5hy6o South America
@hansemannluchter6432 ай бұрын
I agree. This video does not SHOW the correct position of the lever under the U-shaped thing...
@billymondonedo28 күн бұрын
I have exactly the same issue with my FE. May I ask you to fix it for me. I am not as delicate as you.
@RVURU28 күн бұрын
Hey, I don´t think we´re even in the same country. If you can´t, the best you can do is find a service technican near you. Best of luck!
@namoo13304 ай бұрын
Hola, tienes un taller? leí que eres de sud américa, tengo este problema con mi nikon fe y me da miedo arreglarlo yo, soy de Santiago de Chile, saludos!
@RVURU4 ай бұрын
Gracias por tu comentario! Estoy en Sudamérica si, pero no en Chile! Por ahora no tengo taller. Desde ya suerte con tu cámara! Saludos
@Kapadorhunter8 ай бұрын
What screwdriver do i need for the bottom lid Thank you
@RVURU8 ай бұрын
Hi! It’s a Philips PH00. Cheers
@danc20142 ай бұрын
Most likely the battery was dead and the shutter lock up. You set it to manual release mode and it unlocked the shutter.
@RVURU2 ай бұрын
Thanks for your comment. The battery was ok all along, had no issue with the battery. Fixed the problem like I show in the video, check it out. Cheers