Thank you for the video. Recently purchased a bike i plan on flipping, the clutch plates are sticking but ive never done a clutch rebuild before. Watching this gives me the confidence to do it 😊
@matthewrussell95182 жыл бұрын
Thanks for that bro . I just brought the 89 ninja and plan to rebuild from ground up . This information was awesome .
@Slevinlobell3 жыл бұрын
This is criminally easy as I expected,lol. Then again I grew up doing this shit on my racing bikes(KX's) but nice to have a double check vid on shit to MAKE SURE its done right. Good vid man.ty
@Slevinlobell3 жыл бұрын
Thats a 2012?? I thought it was like a 1990 by the age of the brake lever and wear,lol. No offense. I have a 2003,2004,!,# a 1993 and my 1993 looks 20 yrs newer than this engine bay,lol. Now thats not a put down,just means you ride alot and that's a good thing. I heard these are basically the same motors as the old ones just redesigned frame and cosmetics.is that true?
@n.a.n.69303 жыл бұрын
I put the bike though some serious abuse lol my first bike.
@GMXR74 жыл бұрын
Thanks a lot...i thought it was harder than that to change springs and plates
@n.a.n.69304 жыл бұрын
No problem 👍
@OneSavage_Wolf3 жыл бұрын
@@n.a.n.6930 thx for video. My clutch barley clicks when I shift it now. Cables new!! Probably just order new springs and disk w/friction plates? Hope this works for me. 🤪
@azzinmotorcam82842 жыл бұрын
Thanks man, i really appreciate it. Thanks from Malaysia
@victortorres15242 жыл бұрын
Thanks 👌
@187.RareMusic.Gaming3 жыл бұрын
i almost went to use a hammer before I found this thanks from Australia
@edherdz96634 жыл бұрын
thanks, for this video, is pretty good.
@milesjohnson66463 жыл бұрын
Thanks for the video very helpful
@julianmustofa44238 ай бұрын
I found out there is difference between 1/5th and 2/3/4th clutch pad. The 1/5th have wider friction pad than the 2/3/4th
@jmanonone39303 жыл бұрын
Thanks from rgv texas
@pettischristopher3 жыл бұрын
Even wit the poor editing I appreciate the vid. I just wish I saw it before I sent my bike to the shop 😂
@n.a.n.69303 жыл бұрын
My editing sucks lol its a learning process
@pettischristopher3 жыл бұрын
So does my editing. But your work doesn’t suck 💯. Thx again. Just found out today that my clutch basket is bad. Might just fix it myself thx to your vid
@robertpicanso21302 жыл бұрын
Thanks for all the great advice and video hope to see more work on your bike
@pinnedthrottle76904 жыл бұрын
So since the outer cover is like an oil pan, would you have to use a gasket when you put it back together to keep oil from leaking?
@n.a.n.69304 жыл бұрын
surprisingly no? I wondered the same thing at first, but its nothing to worry about. Kawi works in odd ways.
@emmettturner94522 жыл бұрын
Maybe his original gasket happened to survive without ripping but, yes, you need to be prepared to replace it when you open the clutch cover. Many clutch kits include it and you should get one if yours does not.
@jaylace37063 жыл бұрын
But man you sure as hell make it look easy. That kinda like I make pull ups look easy. Lol lol.
@lunaticboys54894 жыл бұрын
Very helpful
@charlieava2 жыл бұрын
Great video
@mohdnizamhezmimohdnizamhez64654 жыл бұрын
Nice vedio
@readydreadygovideos25652 жыл бұрын
Is this the same for zzr 250
@shedgod57923 жыл бұрын
Hey I’m replacing mine so that pin in between the 4 bolts does it freely move in and out like very easily? Wondering if maybe that’s my issue
@mikebenson1104 Жыл бұрын
What kind of oil to put back in
@ayeyogalaxy6524 Жыл бұрын
10w40
@tionyameadows45563 жыл бұрын
Can you put efm Auto clutch on ninja 250?or any auto clutch? Trying to switch from manual to automatic
@n.a.n.69303 жыл бұрын
eehhhh no, not unless its a custom engineering build. but hey just take it slow and learn a manual trans its not as intimidating once you get a little ride time. stay safe
@davidfoster5644 жыл бұрын
Man I just got myself an 08 ninja 250 I need a website for good parts idk where to look trying to find a clutch kit and break router or maybe an abs setup any suggestions?
@n.a.n.69304 жыл бұрын
If you are looking for parts this link should help alot however as far as ABS brakes go you usuasally cant find them for starter bikes such as a n250 beceause it doesnt have enough power to need them although its is a safe precaution. Heres also a forum for the n250 and abs. forums.ninja250.org/posting.php?mode=topicreview&t=81498&tro=1 www.partzilla.com/catalog/kawasaki/motorcycle/2003/ninja-250r-ex250-f17?gclid=Cj0KCQjwhvf6BRCkARIsAGl1GGj4moStn5xMoW_r3VAAKPzrSDYIkvbesSMTQl211VJT_8EtQ9q1H2IaAgkmEALw_wcB
@itsmzcword2u7722 жыл бұрын
I've found most of what I need on ebay...
@jmanonone39303 жыл бұрын
Very useful bro thanks
@jaylace37063 жыл бұрын
What happened to the gasket?? Does it matter? He doesn't mention it??
@emmettturner94522 жыл бұрын
Hopefully his didn’t tear.
@Imtheclowers394 жыл бұрын
Do you not neet to pack the bearing
@n.a.n.69303 жыл бұрын
its optional but mostly not necessary as the motor oil keeps the bearing cool enough to stop the internal grease from breaking down. so the bearing (without repacking) usually out last the life of the motor even a few rebuilds.