Did We COMPLETE The SCANIA 143 In TIME😰😨

[@Drewski911]

Wow Nipper, you've totally smashed it on the 143 restoration, looks absolutely immaculate 💯 The Ken Thomas collection is absolutely stunning too, each one looking like a factory museum exhibit 👌

[@DaveGreeneramblingcarpenter]

Looking and sounding great,, nice work 👍👍 Happy memories of 143's

[@garrygrant2827]

That is a beautiful restoration nipper on that 143 scania. Will look awesome when new stacks are fitted. The 2ken Thomas fodens are absolutely mint on that trailer beautiful paint job on the Arctic tipper with the little lister moter plus 22mpg and able to do 50mph wow. That mercedes unit was really looking great . I agree nipper Ken Thomas trucks are very well presented enjoyed the video nipper very much

[@johnwilliams-um8rw]

All I can say Nipper is AWSOME.

[@eddiedonaldson6505]

The old 143 is looking stunning, job well done Nipper and team 🤙

[@BladeRMC187]

Mr Scott will be pleased to see this done to such a high standard I am sure👍🏼👍🏼

[@craigorford9932]

Great vlog Nipper,And wow nice trucks love all the Scania’s

[@collybarry]

Just came across your channel Nipper and these old trucks bring back child hood memories. Would love to see inside the old Volvos the F10 and the F7 I seen in a previous videos . 😊

[@bunter92]

I had the pleasure of growing up a stone throw from gunning yard with my old man driving out the same yard great to see the 143 in its colours spent many of years in the yard with them was taught how to drive a waggon before a car 👌🏻🤣

[@Waggysir]

Where was there yard? The now lomax yard down there or further round

[@bunter92]

Was so pal used to be filled with lorry’s that yard and two massive white guard dogs lol

[@BladeRMC187]

Later on it was Saltpans Road Ayr, originally Glenginnet Road, Barr for the original yard/shed

[@geraintgriffiths7487]

Nice job nipper, couldn't have done it without Andys help though.

[@stacyscholes6760]

Colours r smart on it nipper mate beautiful motor 👌

[@garryabbott]

That’s looking amazing mate what a restoration

[@Dan_Gyros]

Lookin good Nipper!

[@burgerman3]

Great job there. Beer's and coffee and 143's. Can I have a job 😂👍

[@gcalombardoltd]

Looks awesome 👍👍👍 well done mate 👍

[@martincaughlan5404]

Lovely finish on the 143👌👌 Keep it banging with content 👊.. lots of grafting...... role on Driftstyle truck show... c,mon.

[@colinelliott8417]

Top class work! Would you happen to know the paint code of the first 143 blue stream? It’s the blue one with pink stripes Scania used on posters and stuff to promote the first streamline in 91 .

[@robertduffin455]

Brilliant video ⭐️👍

[@johnc621]

Stunning work ❤

[@martwebb32]

Any chance you could strike up the 141 in the next shed please Nipper? Love that sound

[@darrelbrown3948]

I had a 143 450 years ago for east west in Northants I loved it . If you want to try Hawkstone larger it’s expensive to buy 26 for 12 bottles

[@AdrianoHunter1981]

Brilliant work you need that beer to finish the truck lol and we missed u at Newark truck fest ❤❤❤❤❤❤❤❤❤

[@truckman4175]

That trailer brings back memories of my youth nipper knew a lot of people who worked at York trailers in Northallerton nice to see one existing

[@roosterneck2158]

fantastic work by you and all that save these trucks. when that V8 shut down and the cooling fans and turbo went to sleep...thats my message that ma da wiz hame.

[@JB-87]

Looks and sounds savage 🤙🏼

[@stu-d74]

You do a cracking job nipper

[@hfraat25]

Looks very smart indeed

[@supersaabclaire]

Proper motor 👌

[@bunter92]

John Scot true gentleman so he is👌🏻!

[@kw68]

Lovely colour scheme

[@declanconway2903]

Great video again Rock Shore is brewed in Saint James’s Brewery where they brew Guinness. Enjoy.

[@Harry-zz8qn]

Beautiful

[@carfan911]

Is there any more models available to buy?

[@marcobrian1619]

Love the content, so meny well looked after lorrys and trailers.... There is something that is coming a shortage of nowadays.......drivers that can use gear sticks. Ok I'm only 10 MTH Into class 1 driving. But got a farming background from 12. Got psv at 20. Got class 2 at 25..... And most of my hgv work has been on sticks.....so much easier on building sites. The autos have come along alot better... And old hgv fitter told me if I can drive a ERF you can drive anything. Well Iv ticked that box......(don't know the correct name) but it was a 3air shift 4 H crash box. But the best so far was a stretched DAF 85, 4over4 with splitters. But again been a ex farmer.....left hand right hand....makes no difference to me. Keep up your vids there Great!!!!!!

[@rkerr9992]

More a fan of the Streamline Nipper but i have to admit thats an amazing restoration of the 143

[@fiestaplaays234]

👍👍👍

[@j.h.customsireland]

rockshore is brewed in Guinness st james gates they do cider also

[@gerbentvandeveen]

Today we had September 30, 23. Also a Truckers Day. For people with an intellectual disability. With more than 100 trucks.

[@gerbentvandeveen]

Truckersday September 30 2023 Bunschoten-Spakenburg (1) / Gerben T van de Veen kzbin.info/www/bejne/sHnVfKuvf9uIp6c Truckersday September 30 2023 Bunschoten-Spakenburg (3) / Gerben T van de Veen kzbin.info/www/bejne/bWekmX5jl96riNE Truckersday September 30 2023 Bunschoten-Spakenburg (2) / Gerben T van de Veen kzbin.info/www/bejne/m5XUhJqlebhgh6M

[@AbandonedCityCamoCrewExplorers]

Nice video To be sure

[@mathewdoesstuff]

Give us some tones

[@paulmccartney4473]

Guinness group nipper rock shore

[@GerrardBuckley]

Did I hear you correctly saying that has a 2 stroke diesel engine? May be I've lived a sheltered live as I've never heard of a 2 stroke diesel engine before.

[@gregshearer423]

Look Detroit diesels up on KZbin they built 2 stroke diesels make one hell of a noise

[@ravenmaster6364]

wasn't the bedford TM a detroit diesel 👍👍would love to see and hear more of that Hughes 1 series 👍

[@terrys1595]

Commer did a two stroke diesel. The Commer TS3’s design is that of a three cylinder supercharged diesel. Each cylinder has two pistons, for a grand total of six, with the crown of each piston facing the other. Each piston is also attached at the other end to a connecting rod, which fits a series of rockers and then attaches to another connecting rod, which connects to the crankshaft. Of note, each cylinder has its own crank-pin, rather than sharing one with the opposing piston. Unlike many opposed piston engines, the TS3 only has one crankshaft, rather than two. The engine is supercharged, with a massive rotating lobe blower feeding air to the intake manifold. The total engine displacement is 3.25 liters, and power output is around 105 horsepower, with a whopping 270 ft. lbs. of torque. Fitted in Commer trucks from 1954 to 1968 My eldest brothers first truck was a Commer TS3 tipper.

[@ravenmaster6364]

@@terrys1595 wow thats absolutely superb knowledge there 👍👍👍 are you on trucknet by any chance? I think they would like to have you onboard as it were, the oldtimer trucks section is excellent 👍👍

[@terrys1595]

@@ravenmaster6364 To tell you the truth, I'm not actually that knowledgeable. As I said my eldest brother's first truck was a Commer TS3, I had a rough idea of how the engine worked, but I had to cheat and all the info I posted on my comment was from the internet 🤫

[@boca316]

Have you and Trucker Tim had a falling out as neither seem to be on each others channels lately?

[@trainspotter66]

Wouldn't it be funny if all of TruckerTims subscribers subbed to nipper and he ended up with more subs than TruckerTim😂😂

[@markh5433]

No because TT a knob

[@deenunya7735]

Why the Silly Hand Across the Face and a Whistle 👎

[@GsCConcrete123]

my 220 is better lol. on hills. with load up. 🤣🤣🤣

[@kiaceratomadman]

Hi nipper matey 👍 it's mark from Wirral Merseyside 👍 i love all of your work on all of your trucks you have done and i love your KZbin videos by the way and it's good to see the old skool trucks aswell i remember most of all the old skool trucks right up to present day trucks and I'm a massive Scania fan and Volvo trucks fan aswell. Have you heard anything from trucker Tim over last few weeks he getting going on his Scania R4 series in his unit and it needs alot of work doing to it and has trucker Tim asked you for any help with Scania R4 series because I've sent him a KZbin message saying that if you get stuck with the Scania R4 series ask nipper for help because nipper knows about all trucks and he is very good at rebuilding trucks, which you are nipper matey 👍 you are very good in what you are doing resto truck building. Keep up the great work and cannot wait to see the Scania with stacks on it and it's completely finished. And also I'm very interested in buying some of your merchandise in about two weeks time.. I'm watching your KZbin videos because I've subscribed to your KZbin channel and trucker Tim aswell as you already know that nipper matey 👍.. enjoy your time with your wife and kids up in Scotland because it's very nice up in Scotland 👍👍 big tangs 👋🤙👋 all round hope to hear from you soon nipper matey 👍👍 thanks from mark from Wirral Merseyside keep your KZbin videos coming out i really enjoy watching them 👍🤙👋

[@nst1981]

I saw it in Truckmax's yard during the week....

[@JJP1804]

So how do you generate money if you keep all the trucks ?

[@nippertherestoman]

They’re not mine ! I restore for customers 🤙

[@JJP1804]

Just a bit confused when I clocked all the resto trucks/trailers in one place and thought they were yours to take to shows. You need to get-up the road more to keep the accent mate. All the best.