Nisan Sentra 2.5l timing chain install information

[@sharkyrich4844]

Rare I say this to KZbin mechanics, but you did very well.

[@unlimitedpossibilities3919]

Hey thanks a million times over !!! You really saved me from junking my ride.that Interference info saved my motor.. ❤❤❤

[@jeremiahbernabe7345]

Thanks for the video going to give it a shot tonight, feel more confident with this and we’ll explained thanks!!

[@MattShaughnessy6]

Awesome if need help you can email me.

[@williamgray7437]

Matthew. When i start my 2.5 2012 Nissan Altima SL i hear the timing chain rattling until i let it run for a little while and it'll stop. I need to get a timing chain but ill be my very first time to work on a Nissan. I watched a few of your videos and I must say, you're dam good 👍.

[@zorans5200]

Make marks on the back of your cams once it's set to TDC before removing the old chain... It's the simpelest way.. that way you know for sure where the old marks were and it will save you alot of time.. if you don't have colors on your chain, count the amount of teeth from mark to mark and color the links on the chain you will put on.. I've had to do that many times because I was using junkyard parts to get by..

[@russellbreazeale1800]

L Thank you for the information in the video I thought I had done messed up but you clarified a bunch of stuff for me. Thank you taking a time and doing a well Incorned presentation.

[@sundaynwafor3183]

You're a good instructor love this

[@AutoBodyEverything]

I have the same motor on 18 lbs.. your awesome with this thank you so much for making this video!! Now..... every time on a cold start I hear this fast rattle that lasts for a good second then goes away, as the motor warms up it gets even quieter but it can still be heard just a little bit.. Reving the motor does not make it worse, not even if you rev it cold. The rattle sound is coming from the timing chain side of the engine and is louder towards the top. I’ve been told it’s the timing chain and or tensioner. I’m also getting oil on my belt and other pullies and it looks like it’s either comming from the front main seal or someplace near bcs I’ve cleaned the entire surface and I’ll find fresh motor oil on the face of the bearing behind the crank pully unless it’s leaking from a more mysterious place lol.. With your experience man what does this sound like to you plz...? Also I’m a master at paint and body and I love giving away my knowledge so I’m here for anyone who has questions for me!! I should leave the link here to a vid of the car so you get a better understanding.... kzbin.info/www/bejne/h2PRZHSGra97mbM

[@MattShaughnessy6]

awww found your question.......yes sounds like a tensioner not working correctly causing chain to rattle. may also want to look in to your oil pump. the rattle comes the tensioner not building up hydraulic pressure correctly or fast enough. the rattle normaly happens upon cold start up and last for about 10-30 secs or until oil pressure builds up. sounds like it maybe time for a timing job. As for the oil leak maybe try getting some UV dye and a UV light. introduce it to the oil and then let it run for min and see if you can pin point where the dye is coming out. thanks for watching and supporting.

[@AutoBodyEverything]

Your awesome thank you so much!! I will comment back when and after I open that can of worms, thanks again🤘

[@lynfordfoster9918]

Great video i just did one today in a 03 x trail

[@RobertHawkins-sr4ny]

GREAT JOB YOU BEEN VERY HELPFUL.

[@vernonhernandez2895]

Thank you bro. Really well explained.

[@JesusEliQuiroz]

Really. Really. Informative. Thanks Matt. I'm a call you Matt from now on, you're my boy!

[@baneledube8610]

Thank you..This is really helpful

[@birdman4505]

Great video working on one now good info thanks

[@MattShaughnessy6]

check me out on www.patreon.com/Matthewyourfriendlyneighborhoodtechnician if you need or want an y one on one help with a project. thanks!!

[@pablovidales8489]

Thanks for the info really helpful

[@rayscyclesrepairs3516]

Do you have to drain the oil to do the timing?

[@jussbowen4388]

So if there all the way up 1&4 and the cams are set to 11&3 I’m I good to start the car up ?

[@juantaveras4837]

I got a Nissan Altima got a Nissan Altima 2002 2.5 changing the head gasket and I'm on the process of putting the time belt back on any advice

[@dariel776]

Great video man thank you

[@sambassch8159]

Nice timing setting bro

[@mathewmeredith3643]

Mathew new head gasket I put on this Nissan x trail timing chain come off the crank do I have to pull the bottom timing cover to check the mark or can I tdc and just line the top marks up?

[@jamieghany2111]

Very informative thank you

[@frankmedina8900]

I'm doing a head gasket replacement but I can't remover the timing chain cover.

[@jasonharris996]

Have you removed the oil pan? I believe there are bolts tucked behind the pan.

[@williamsmit6875]

How do i fit a oilpump on 2008 petrol head. Nissan x trail

[@jonmendenhall1573]

Hi Matt I have a 2.0 that the top timing chain broke .i am not able to turn the engine by hand .i do not have any chains on.should I be able to turn the engine a full rotation?

[@djamax5898]

What happen when the mark is ok but after a couple turn the lifters pointing the same way?One in one out?

[@TosadEnterprise-cf9mk]

Good evening sir after the Mechanics set the of my nissan rouge 2008 is not rasing anymore what happened

[@TheBooze13]

thanks for videos man really appreciate them! just resurfaced my cylinder head and while putting my cam sprockets i noticed i lost my marks on my chain. so as long as i have TDC and cams in correct position it shouldn’t matter how my chain is on?

[@MattShaughnessy6]

ya know......I have been in situations where I did not have any marks on a chain or even a belt. so yes...so long as you know you have TDC you should be good. just make sure to turn the engine over by hand to check for valve clearance at least two full rotations.

[@TheBooze13]

Matt Shaughnessy awesome thanks for the help! jobs all done

[@209chevymon]

so should i bolt down the head first then adjust the cam and chain after??? need help please

[@joesmo4749]

What is torque spec on camshaft phaser?

[@jaysonmari1051]

I love you for this video

[@MattShaughnessy6]

Thanks. Installing that timing chain is something else isn't it?

[@peaceful6738]

I need help with timing chain cams not lining up. Islam rogue 2012

[@antonioholmes3926]

Hey Matt I’m in the process of reinstalling the timing belt on my Nissan 2.5 but I notice some slack in the chain is it suppose to be like that or is the tensioner goin to take the slack out

[@HaydynBromley]

hi Matthew, I have just replaced a head gasket and while i was installing the timing chain top gears, the timing chain slackened off. I haven't stripped the engine down as you have, the timing chain cover is still intact. is there a chance that the timing chain may have slipped off the timing mark on the crank gear? Just trying to avoid stripping the engine down completely as i don't have the space or the time. Any advice would be appreciated.

[@tallmanoo18ps50]

i am looking for head bolt torque spec for a nissan x trail qr20 engine .

[@masmulyono4031]

Nice bud, my ask is How many kilometers timing chain must to change ?

[@mahendranpillai964]

Thank you 👍👍👍

[@PatrickMtawali-w2l]

So what about the oil pump?

[@jerrodcarter3773]

2002 Altima 2.5...I have the cam sensor code and timing over advanced code...through a little bit of deduction ive come to the conclusion my timing chain is stretched..car stalling...etc...it has 230k on the clock...sound about right?

[@MattShaughnessy6]

Yes that sounds possible. Can you perform a compression test and leak down test? Either won could confirm this.

[@jerrodcarter3773]

Matt Shaughnessy compression is good..within a couple pounds all 4 cylinders...I haven’t pulled the head...I was kinda hoping to avoid that if possible

[@MattShaughnessy6]

Ok next try a leak down test. See if it holds compression. If you past that test I'd say wait on pulling the head we will try a few other things.

[@jerrodcarter3773]

Ok will do thank you

[@fechalnassaya5737]

❤❤❤

[@datz_nice_805]

What year it this car

[@jesusmejia8391]

How did you install balance chain?

[@Elphxdav]

Idk if i have a rod knock or chain rattle. Idle nothing than i give it a little gas and it makes noise

[@MattShaughnessy6]

what about at start up? roc knocks and chain rattles can normally be heard upon start up and go with the flow of rpms...if you rev it you hear it get faster.........however i seen chains that only rattle when you give it the gas like you say......a "Knock" is pretty clear cut so if you find your self question a "knock" it mayb very well be a rattle and a chain.....Make sense?

[@Elphxdav]

@@MattShaughnessy6 starts no noise. When i give ot gas it rattles or knocks.

[@neverstoplearning382]

Nice mate.

[@tai2127]

Legend...

[@honzamarvan8824]

Hello, we have problems with this engine can You help us to solve it? We are from the Czech Republic. we have problem with with camshaft position after start it comes to 43% and never to 0% on idle I don't know why. Timming is OK we replace timming chain and camshaft wheels and problem same we replaced the regulating oil valve that's regulate the camshaft wheel but nothing has changed and problem. same. Can you help me? Thanks a lot with any help.

[@MattShaughnessy6]

Email me [e-mail]

[@Tom-90210]

Use a cam gear holder. No way to mess it up.

[@A-ROMAO]

how tall is a head qr 25 std? there is a table here no brazil do not think?

[@johnviegas496]

a altura da cabeca/culata ( cylinder head )original são 130 mm . cuidado com o tipo de junta . Boa sorte

[@choniaaaron2565]

. Hi i did a head gasket job. It started right up and about 30 to 45 seconds after running I could here it tapping and clink clank clunk.and the chain was loos why was it that way

[@MattShaughnessy6]

uh oh!!!!!! yep I've been there before. have you checked the tensioner? maybe the chain jumped upon start up? issue is.......30-45 seconds of running and then stalling with clunks and clanks sounds like a few valves may have been taken out????

[@benjaminduliguez5420]

Thank you.....

[@MattShaughnessy6]

You're welcome!

[@1naequan]

Good video

[@vinceburling4613]

just put the cams in the correct oreintation before you put the head on.

[@santosmitjans7012]

I need help

[@MattShaughnessy6]

Email me [e-mail]

[@AutoBodyEverything]

kzbin.info/www/bejne/rGWZmGWXm8h7pck Close up of phaser gear and tensioner doing the noise clicking on startup thing while turning the crank by hand. and it’s a new phaser too just aftermarket so maybe it’s failing, like out the box

[@MattShaughnessy6]

possible yes........it has happen to me before on nissan getting a bad phaser.

[@AutoBodyEverything]

Matt Shaughnessy .... 👌can you tell me more? How does the story end?

[@juantaveras4837]

Klok NYC

[@charlesvidal3543]

Can I have a phone number to call you. I forgot how to replace my connectors on my Nissan urvan gasoline engine 2009 model. Can you help me?

[@RovinBudhan]

Hello

[@squirrelcovers6340]

Way over my head.