nissan maxima 3.5 camshaft position sensor or camshaft sensor

Please subscribe to my channel for more content it will be appreciated just trying to help save money
Thanks again😀
check engine light came on. played around with the car a little more. the car stalls. when shifting to reverse hard shift. when placing car in D hard shift. when you drive it, it starts off in 5th gear. when put into tiptronic mode the shifter reads has gear 5. now when driving i have only 2 gears in tiptronic mode. im assuming 5 and maybe 3 or 4. later on that day i turned the car on and everything went away, the hard crank, the stalling, and the weird shifting. the next day i turn the car on and all of the symptoms came back. i went to autozone and they read the ecm with a cam shaft position sensor in bank 2 as the issue. my only question is would the cam shaft positioning sensor cause the car to shift crazy and only have reverse and 2 gears? and all the things i have mentioned? and is there a way to reset the ecu to see if it really is a sensor or just a hiccup. im all ears for sugestions before i bring it to the dealership and fork out hundreds of dollars.

[@MrBUGS713]

Thank you, you saved me $2,300. My car had been sitting for 8 months until I found your video. Thanks!!!

[@joyladner986]

This video was so awesomely helpful and saved me from taking my car into an autoshop. I have a 2005 Nissan Altima 3.5SL automatic that suddenly began hardshifting itself to 5th gear. Check engine light flared up. It was the left side cam shaft sensor, the same as the video, that went bad. Unbolting that sensor was difficult, we had to get a swiffle socket on a long extention rachet to unskrew the 10mm bolt. Also, we couldn't pop out the old sensor by pushing on the green piece, we broke the green piece actually while pinching it with a large pair of plyers. This turned out okay when plugged the new sensor into the plug that holds the wires. Phewf! To clear the engine light from the dashboard we removed both the + and - connections on the battery, then tightened them back on to the battery. I started up my car, no engine light illimunated, drove it around 20 minutes and the camshaft sensor worked properly for my transmission to shift like normal again. OMG what a day!!! My brother found this video and we replayed it over and over.. totally saved the day and money. THANK YOU SO MUCH!!!!!!!!!!!!!!!!

[@joyladner986]

The cam shaft sensor was only $65 at Autozone and comes with a lifetime warranty. The swivle socket on a long extension rachet were a MUST to unskrew the 10mm bolt. Those two tools where about $35 together at Autozone.

[@RShannon5310]

JOY LADNER what could it be if my car cuts off while driving but if I unplug the battery and plug it back up it will start

[@Beerme-pl2ml]

Richard Shannon check battery connections

[@james6420]

Your the man my wife walk in the door looks at me and says we need a new transmission. So I bring it to the shop thay tell me the same thing new transmission hard start hard shift stuck 5th then I saw this video you just saved me $4.726. I just wanted to say thank you!!!!!!!!. $200 both camshaft sensors runs like a champ

[@SantinoCastrone]

Damn homie I just replaced both of mine(it’s 2024) for $60. I hope you not still buying from the same provider😂

[@tedhernandez2394]

Hey guys if anyone here does a little of their own work on their Maxima's? Here''s a little tip when changing out the plugs. The front plugs are easy to get to. The rear.... one has to remove the Plenum. Sort of like an air manifold on top of the engine. Not too hard. The kicker here is the two bolts behind the "tunnel" that connects the air intake assembly to the throttle body and the Plenum. They're hard to access but it can be done. I think they may be a #12 socket or #12 ratcheting wrench. Be patient!! They may be hard to crack but they will come off. Once all that stuff is free of the engine? You have a clear space to do your work to either change out your plugs or maybe a bad coil or two. Good luck to you. And "The Good Life" Bless you sir...You remind me of when I was a young back yard mechanic...

[@jimh472]

Also check your alternator. If it's dying a slow death the low voltage will play havoc with lots of sensors.

[@guanaco1960]

Thank you so much; I was having exactly the same issue with my Maxima. Hard shift on Reverse! I thought I was going to have to replace the trany. I couldn't believe this little sensor could fix it. Love KZbin, loved the video. Bought the sensor at Autozone for $64.00. Beautiful thing!

[@juanverdades5437]

+Marco Martinez (guanaco1960) I'm in the same situation as you were. Hoping this works for me too

[@danielstockman2346]

Worked perfect!!! Crazy how simple of a fix this was!! I bet so many people were jacked by a transmission shop on this one.

[@tockesalot]

+Daniel Stockman i almost got raped with a new transmission for 3700.

[@orasis]

The car isn't even worth 3700. Anyone paying more than 1000-1500 for this car (any year) is stupid. It was a lemon the day it was engineered. A nice looking lemon, but still... a lemon.

[@titomolina6643]

I have a 2004 maxima that i bought new, it only has 67k ml on it now, a few few years after i bought it did the same thing with very little miles back then, long story short, Nissan replaced 4 transmission since then not counting the one that came with the car! All under warranty . Now it just did the same the same as you described in your video! I wandered if these so call mechanics even know of this issue, I will definitely do that and replaced both banks, I had read some blogs about the same subject that prompted me to look up in KZbin, THANKS SO SO MUCH for posting this!! I know is years later but nonetheless!!!

[@mikehull8915]

I bought a Maxima for 1500. 110k miles. Guy told me it would need a new transmission. I changed this sensor and the issues all went away. This video got me a good deal and saved me thousands. Thanks bro

[@PlutoDwarf-j9f]

How many sensors did you change?

[@rodwillenak536]

Thank you!!!! My Nissan Maxima was in a Limp mode for 3 months. Mechanics (few of them) told me it is the transmission/electronics and asked from 1600-2500 CAD. Your Video saved me the difference on money, and the car is as good as new again!!!

[@mef12727]

Please let me know which store you went to purchase. The auto zone item started my car but still in 5th gear

[@Salvadorsalais]

Man, you're video saved me hundreds of dollars and a lot of stress. Thanks so much! For those of you who have the sensor in Bank 1 going out, it's not that hard to change. It's not as easy as the one in bank 2 that he's changing, but for Bank 1 you only need to get the air intake out of the way and the sensor is more accessible.

[@cbar6537]

Dat1Guy good to know. Should I change both at the same time? Or does that 1 last lobger

[@PlutoDwarf-j9f]

@@cbar6537 Did you replace both? Did it fix the problem?

[@cbar6537]

Wil Witherspoon I replaced the bank 2 sensor only and it fixed everything

[@MrNathaniel216]

Hey everybody. I've had this problem to. So if you have this problem please change both sensors that's shown on this video even tho he only changed one. The sensors ain't that much. I bought both of mine at autozone for around $90-$100 for both. I wish I saw this video before I took my car to nissan to get it diagnosed which was $100. I'm just happy my car is back to normal. So get both sensors and change both at the same time. And to reset your ses light. Just disconnect your positive battery for 30 min. That's what I was told by nissan. Good luck everybody.

[@cbar6537]

Junior Villarreal thank you very much I’ll be sure to change both. Also there’s a trick you can do to get codes and clear codes with zero tools whatever I know this post is old but anyways

[@Bamby187]

Wow. See that's why I'm not using the ones I have on eBay. I started getting that TCS and slip signal also and same thing on the gear and kick on switching gears. But what made this obvious for me, I got an oil change and it's using synthetic oil and boom! That's when it began to mess up and my old battery too. My problem now it began after 1 month using the ones from eBay, bank 1 is faulty and I'm happy to say I bought the ones from autozone and it costed me 97 bucks for the sensor I needed. Man, you video proves me that it has nothing to do with the transmission. Thanks man

[@rrrtgeorgia0181]

Can't thank you enough for posting this video. I was freaking out thinking I needed to buy a new transmission. Saw your video, pulled the B-Bank sensor out in less than 5 minutes, got to Advance Auto 10 minutes before closing, changed the sensor in another 5 minutes and booom! Car started with no issues and ran like new. After 166,000 miles I am barely breaking it in. Thank you

[@tedhernandez2394]

Why are so many mechanics thieves?? It seems as if they constantly hit people who are in a tough spot in life. They also put a bad name out there for the decent mechanics who are the true helpers. Keep up the good work "The Good Life!! I subscribed to you my friend!

[@WillieCampos]

Had the same issue on my 2005 Maxima SE and changing the left camshaft sensor saved me a ton of money. Glad I came across this video. I have 312K miles on it and I DID NOT want to purchase another transmission. I initially bought a sensor on ebay to save some money and it didn't work. I spent an extra $20 for a Duralast and it fixed the problem...

[@Hxncho_Great]

Auto or Manual ?

[@WillieCampos]

+yaamanzzdee auto

[@Hxncho_Great]

+William Campos (Willie) do you know if they have the same problems in stick ?

[@WillieCampos]

I wouldn't know. It's a quick and inexpensive fix so you may want to try it.

[@shenikasapp3666]

I LOVE YOU!! Thank you..Thank you!! You saved us so much money!! My engine jumped when put in park. There were no lights on on the dash. One mechanic told us we needed a motor mount $ $600!! Another Mechanic told us we needed to service our transmission with the dealer! After watching this video, I drove to AutoZone and picked up the Duralast brand Camshaft, my husband popped it in and and IT WORKED!! YOU-ARE-THE-BEST!! May God bless you and your family for posted this video!!

[@mef12727]

Can you tell me which store and the part number? I went to Auto zone and it started my car but the shifting gear to 5th is still occurring

[@gustavoportillo1408]

hi brother tank you you saved me a ton of money my car was doing exactly same thing transmission kicking hard and engine taking too long to start and transmission wouldn't go fast in 1st gear ..so after I replace that sensor now is running like new..tank you so much please keep up your videos ..

[@Kartums]

Thanks man.. This helped fix my shamcraft. :D

[@glocklove19]

Awesomeness!!!

[@Kartums]

You should mention that it's a 10mm bolt. fix that shamcraft real good. xD

[@Kartums]

btw got mine from auto anything dot com 69.58.. was convenient for me with next day ships. thanks man.

[@mrfixit-wb5qb]

Kartums Pokes 😂😂😂

[@emoney7816]

🤣🤣🤣🤣

[@neilwilliams8608]

I have a 2002 Nissan Maxima 3.5. When I turn the key to the RUN position, nothing happens. No click and no start. Awesome video. Thank you very much.

[@LinkSquish]

I replaced my camshaft position sensor because it took a bit longer to start & when I plugged it in the car wouldn't start at all. So I thought it had to be the crankshaft position sensor. So I bought a fault code scan tool that bluethooths to my phone. Sure enough, it was the crankshaft. I replaced it & sometimes it takes a bit to start & sometimes it starts right up. I'm still getting the cam sensor code. I got it on Amazon & when you said don't get it online I thought that's got to be it then. I got both cam & crank sensors online. Thanks for the video.

[@briannagomez7443]

James Blodgett

[@realdopety3783]

Love how you described the hard hit I def got that same result

[@tonybrown9509]

You was spot on and very simple with your directions on how to install and what to buy .Thanks so much man!!!

[@titomolina6643]

Updated!! Success!! Bought a set today installed ghen and all is good now, thanks again!!

[@quepe7211]

I'm sure glad I stumbled up on your video. I just started experiencing this issues days ago with my Maxima, ironically after changing both sensors on my daughter's Altima. Appreciate you! 👍

[@lk10611]

Thank you so much for your video. You just saved me $1500.

[@alecsithong]

Thank you. I will try this. My 2005 Maxima at 88,000 miles is just starting to have this transmission problem. I've pampered it since day one. However I'm at it's early stages of problems and reading online there's a major problem with these 04-06 Maxima's. I read it's the speed sensor, turbine sensor, and/or camshaft sensor. All seem to be related with the transmission in moving the gears up and down properly. I'll follow up for results when I change these. I don't want to rebuild the entire transmission just yet ($1200-$3500) as it's still in VERY good condition.

[@PlutoDwarf-j9f]

Did you change the camshaft sensor(s)? Did it work?

[@mistacdawg6882]

Thank you! I’m at 265,000+ miles and just did engine swap 6 months ago, have to change bank 1 with same symptoms. Starting in 5th gear. My code reader says bank 1 circuit

[@daleraby8117]

Check crank sensor, Took my to the transmission shop and they fix it for $200.00 and car runs perfect!

[@PaulSmithDYL]

Thank you SO MUCH!!! I thought I had a major trans problem and all was corrected by replacing the Crankshaft position sensor. $31.00 I had all the same symptoms and now all is well. Thanks for sharing!!

[@bjsmith0523]

If I changed the camshaft position sensor and my car still have the same problem .... What else might be the problem??

[@glocklove19]

15 people don't like my video lol they must be mechanics

[@Mabeylater293]

Lol!!

[@alamgarza1571]

glocklove19 hahaha

[@Butterflyctb]

glocklove19 i love your video...

[@glocklove19]

Casey Brown Thanks just helping people out 😎

[@DJKingJames504]

glocklove19 You're the man.

[@glenn1657]

Thank you this seemed to also help with the low idle my car had, all seems well driving fine I changed both of them just to be safe thanks again .

[@mrteamea]

I see there are three sensors, how do you know which of the 3 to change... Also, are they all the same type for the sensor, or each port has a specification?

[@annettecampbell9913]

Thank you!! Been dealing with this very issue; nice to know I can fix it myself too!! Thanks so much!!

[@juanb8874]

did it give u driving problems before changing it? i think i have same issue except when engine warms up feels like im in first gear thanxs

[@GIggl3z2424]

You the man bro!!! My Maxima just starting having this issue today. Watched your video and now my car is running like new again. Thanks for sharing I'm sure mechanics hate this video lol

[@mef12727]

Please let me know which store you went to purchase. The auto zone item started my car but still in 5th gear

[@serpcobr]

Thanks Bro for the help, you showed something at 5:00, and it took days for me finding that info regarding the camshaft bank 1, Now my car works normally. thank you, i liked and subscribed!

[@pedroleon4251]

my car does the same went to a mechanic he charged me 700 and like three months later same thing happened went back and ten he told me it was this thank this really help ima try to do it

[@polpajac1]

That's insane! Took me 30 min to do both, and I paid $65 each at Autozone

[@Skatetorres]

So, did you replace the cam shafts or crank shaft sensor? You're answer would be appreciated.

[@LinkSquish]

He changed the camshaft position sensor, the crankshaft position sensor is on the bottom.

[@xamn1]

He obviously said sham craft lmao jk

[@caliguylouie8411]

+James Blodgett he changed the crankshaft sensor guy

[@rory6227]

Caliguylouie 84 it is the camshaft bank 2.

[@ArthurLagoArthurLago]

Sometimes I have that problem, but sometimes you feel that the car hits and speed does not come quickly. You think your that may be the problem?

[@Steph-qn2pc]

the part you showed underneath the car for the camshaft, the last part. is the black part is one that need to be replaced? you didn't point to a part to know with one.

[@Blessedd9310]

My maxima 2005. I guess it does a jerk or a thump wen im breaking at its about to hit down 20mph. It doesnt do it wen i first turn it on but after a couple of minutes, it thumps a lil. And after a while wen i drive for a long time. The thump gets harder. And then wen im accelerating and im about to reach 20mph it starts thumping. And wen i break and i switch from D to N, it doesnt do the thumping, unless its in D and then after switching back from N to D, the thumping while accelerating stops for a little and then goes back. What do u think?

[@kaminselwood267]

Yo! mad props. I'm about to save me some serious money. Great video, straight to the point. Im gonna recharge my battery and replace both sensors this weekend. Thanks

[@lashawnj81]

I'm having the same problem with my 2005 Max thank you soooooooo much I am going to do it myself you are a life saver

[@tockesalot]

yo thanks for this video cause the nissan dealer told me that it was the transmission my nissan only has 67000 miles and i was having the same issues.

[@mrj.8183]

tockesalot I bealy got 2xxx mile when I bought it a 2005 maxima

[@shanewhite5666]

Thanks allot your video helped me fix my car when my garage could not.

[@chrisgonzales6696]

Camshaft position sensor bank 1 or bank 2?? My car doesn't start at all and it says I need to replace Bank 1 which is more towards the back and it's harder to get to. I was just driving and my car randomly lost power and came to a dead stop for no reason

[@OURPATHTOCHRIST]

I changed my camshaft sensor and still same problem what can i do

[@3rbabyjok]

Hey quick question for u. Do u think that part in my murano cause it to not start when it gets hot? First start is great and driving it non stop is great but in town stop and go traffic and shutting off and starting doing errands not good. When I park it after driving it like 20 miles shut it off it won't start until engine cools down then it well start again.

[@juanb8874]

hey bro how did car drive before u changed sensor? did it drive poor when it was warned up? thanks

[@alecsithong]

Dale Raby - do you mean camshaft sensor? I already replaced it and it doesn't work. I'll try the speed sensor next

[@miracleinsider]

I know this video is super old but I'm gonna comment for anyone here today. Yes, a faulty Camshaft position sensor will cause every issue mentioned in the description box above. When it malfunctions, it creates false codes on the OBD2 scanner and causes jerking when shifting gears as well as difficulty accelerating the car. A replacement part is like $80 at auto zone depending on your car's make and can be done in 5-10 minutes without a mechanic.

[@maddrichstaks7787]

What's up junjun..just saw your video..much appreciated..quick question..you still have the maxima?? Did that fix Last a long time

[@kirkmikesell4148]

Do you know if this cures the slow shift problem ? I'm considering buying a used one. I've heard that this motor has a lot of transmission problems... I really appreciate your video....

[@asherlogy]

Have you found the problem? Im having the same issue. Mine revs to about 6k rpm before its 1st to 2nd upshift.

[@iSOBigD]

asherlogy Hey there. Most people have the shifting issues after 100-150k km. The issue seems to not be the entire transmission, but just part of the Valve Body, specifically, the Solenoids. Here's a forum where lots of people did it and fixed their issue: maxima.org/forums/6th-generation-maxima-2004-2008/597683-re5f22a-transmission-fix-38.html And here's a step-by-step/pics of how you can change either the solenoids ($100-200) or the entire valve body ($500-1000): maxima.org/forums/6th-generation-maxima-2004-2008/597683-re5f22a-transmission-fix-38.html The fix in this video is just for the "safe mode" / Stuck in 5th gear issue which I started having recently, but it's unrelated to the hard shifting during regular driving when the car changes gears.

[@iSOBigD]

I replied to the other guy but in case you're still interested: Most people have the shifting issues after 100-150k km. The issue seems to not be the entire transmission, but just part of the Valve Body, specifically, the Solenoids. Here's a forum where lots of people did it and fixed their issue: maxima.org/forums/6th-generation-maxima-2004-2008/597683-re5f22a-transmission-fix-38.html And here's a step-by-step/pics of how you can change either the solenoids ($100-200) or the entire valve body ($500-1000): maxima.org/forums/6th-generation-maxima-2004-2008/597683-re5f22a-transmission-fix-38.html Outside of that honestly the car is amazing for the price. I got mine for $8000 Canadian around 2009 and there's nothing comparable in that price/year range in terms of looks, performance and features. Right now it's even cheaper so if you can find one that's had the solenoids replaced, go for it, or just expect to have to change them soon.

[@angeljimenez5430]

Excuse me, I have an Altima SE-R 2005, it started to fail as you say, I haven't changed it 3 days ago at a traffic light it was neutralized and it didn't turn on D or R, I turned it off after a while I advance but slowly and then normal, it will be Is that the problem or is it the transmission? Thank you I hope you can help me, salu2

[@leoramirez1070]

how did run after you installed that? no more rough gear shifts?

[@codypitts8967]

I figured it was my shramcraf sensor thanks man

[@dominguez703]

Hello everybody....Im having the same issues however, my 07 MO does not have a check engine light nor a service engine soon light. the service engine soon light was on a couple months ago. the light clear its self after i replace the radiator that was bad. but i do have the same slippage problems as everybody else here.when im driving below 40mph my RPM goes up and then back down steadily and climbs back up slowly unless i floor it the car will use everything it can to go. i have done a lot of major repairs to get this vehicle safe and up and running but still have little problems to fix. should i just replace one sensor for example the speed sensor or replace the camshaft and transmission turbine sensor including the speed sensor. my car is leaking a lil on the driver side next to the wheel dont know if its the transmission or some other type of air leak im no expert. but does any body know if i were to replace these sensors will it help the slippage or focus on the minor leakage first. i spend a lot of money into this car about 4 grand to get it back up and running please help i am not sure to keep on fixing the vehicle my self or sell it.

[@blssed2bme1234]

My car was doing the hard jerk when I shift or drive under 2 rpm. Shop told Me I needed new motor mounts for $1600. Looking at this might have saved Me a ton of money. Will see. I wish you were I. Dallas 😊

[@ndysive4373]

blssed2bme1234. I having the same issue also. Went to oriellys to have them to check the code mines said code p0340 bank one sensor. Having mines replaced today will keep you updated. I'm located in carrollton , tx will keep you updated on the cost of you haven't gotten yours done already

[@nazihborish8224]

I have same problem with my maxima 04. It's jumping when I drive under 2 rpm. Do I have to change camshaft sensor?

[@treybandz5480]

Did this allow your car to start shifting?

[@TheAsiansk8ter]

I was driving my G-35 06 sedan, just was about to leave my house and a block away. The rpms fall im getting no accelerator response. Power steering dies. The car just turns off. I try starting it wont start. And after turning it off and waiting for a while i turn it on and took a while for it to get up and running. But another is that my car says VDC off. When it's on. I have no idea why. Fortunately i was able to get home. I hope this is the problem with my car.

[@debstar2005]

wow such a helpful vid i have a nissan micra engine lights on, had a diagnostic done and its showing as the cam shift sensor which i had replaced about 6 months ago - so i am taking it back to them. This has been weight lifted off my mind, - with manual the car will drive but it will be sorta stiff and sluggish.

[@PlutoDwarf-j9f]

Did you ever get it fixed?

[@dexterlopez2960]

Hey, need help have a 05 Nissan maxima. Have a hard time starting after i run out of gas. Changed my gas pump, still won't start turns over but that's it. Just hear a clicking sound when i try to turn the car on.

[@chucknorris8224]

Thank you brother, I was looking for a video where they explain it well

[@erickaczmarek6057]

What about ordering camshaft sensor from Amazon are those ok? It says it fits this model car?

[@RodneyProphete]

Just Purchase and 04 max last month, and I notice today the Speedometer Not moving, but the RPM gauge is when accelerate. Notice also the transmission was a little forcing, Could that be the issue?

[@143poppa]

Thanks trans shop told me I needed a trans

[@ALLN1Podcast]

This is so helpful 😢 I was finna cryyyyy bruh my car just stayed in 5th

[@frankyfelony]

I have 2002 Maxima, auto zone told me cam shaft sensor one. Which one is the Cam Shaft Sensor 1, also, will my slip and tcs lights go off?

[@ashlynnnpaige]

On my 2005 Nissan Maxima my camshaft sensor(bank 1) is the one towards the back of the car closest to the firewall. The bank 2 camshaft sensor is right there at the camshaft and all. & Yes your tcs light will go off. That's what happened to my car also.

[@jandonie]

I replace bank 2 as shown on your video same part as yours, however, it was running well for 1 day, now the transmission jump again to 5th gear, I pull over and kill the engine waited 2 minutes restarted and it's back to normal, , should I replace bank 1 as well?

[@skfaru9]

Hi Jay I have similar issue I changed Bank 2 Camshaft but the problem is persisting..please let me know if you found a fix. Many thanks!

[@mef12727]

​@@skfaru9the AutoZone sensors don't last long.

[@attackkatt]

Wow..I have had transmission problems since the first week. Not shifting ,,then shifting to fast. .. I was going nutz. Not wanting to start, then .. retarding the timing all the way to the bottom. Thanks big time for the help. Everyone else was saying bad CVT .

[@Its.jasminee28]

Hey my car giving trouble starting and then the scanner read the code “ nats “ and when i put key in ignition the security system stay solid red and it won’t crank over. Could that be the camshaft sensor ? Help please

[@showtime-qc-2034]

thank you have maxima 2003 and same probleme you rock

[@rafk7027]

05 maxima fixed for pennies, thanks 4 a great video bro

[@mikesangster8911]

Thank you....Your video was fantastic and explained so much about issues I was having!

[@enriquejackson4697]

so after you rode in did it start back acting up and how long did it take

[@10krms8]

Man i wish saw this video last month i pay 750 to get these sensors done at a shop i have the same car when ever u do a repair on these please make a vid it will help guys with these kind of car thanks man

[@HydroLoks]

I've been losing power just to my gas pedal lately the car stays on but my pedal goes completely dead would this be the same censor???

[@TheSAR74]

Friend I have that same problem, I repaired the transmission and started in gear 5, I replaced 2 sensors of camshaft and 1 of crankshaft, and still in gear 5 .. Can you give some advice Thank you..

[@fcatholic21]

Thanks for the video, I have a 2004 Nissan Maxima SE 130 k, automatic transmission. Last week my car start jerking when changing gears from 2nd to 3rd gear. Do you have any idea what the problem could be?hanks

[@daleraby8117]

Check crank sensor

[@trequiladenson1563]

i have question how do you take it apart to put the piece on & when im done what is ot i suppose to reset

[@johnnygaleana]

hey bro my maxima would turn off by itself soon as i turn it on...and the code says is the camshaft...did u have the same problem

[@PiomiStrawhat]

How do you get that engine light to go off? Also thx, I did it myself without a mechanic.

[@cruzcontent7898]

was it a 10mm wrench to unbolt the sensor or does it pop off?

[@jarradwall8900]

I have an 06 Max and it does this....how much does the camshaft cost?

[@TheRustrix]

The same happens to Altima 2.5. And yes, almost all the mechanics used to have the same inicial diagnostic: "it's a trany problem". Sometimes it is just the arness.

[@BigHaiti1804]

Sir i have the same problem but i changed the first one and it still does it my mechanic says it might be the back one thats causing it is this true or not?

[@serpcobr]

how do u reset the low tire pressure warning light? id appreciate it a lot

[@BobbyHilll132]

How do you know which one to replace. The front or back or whatever??? When my car gets warm and I put it in park and shift to drive it wants to jerk and it also takes a few seconds extra to crank. Sometimes not on the first one. 2006 Nissan Maxima. I was driving and it stopped moving. They said it was my transmission filter. So I got a new one and now it still Kicks. I'm hoping this is the fix because I'm tired of spending money on it

[@nineathanwilliams891]

Harrison and Hailey My 2006 Nissan max does the same thing

[@BobbyHilll132]

Listen. Replace the part I did today. Fixes it

[@BobbyHilll132]

Nineathan Williams replace the cam shaft sensor. Fixes it

[@chasejones3834]

Harrison and Hailey did u do it is it fix now

[@umerrizwan3880]

Nineathan Williams did this fix your problem because I’m having the same Problem

[@joelarciniega8431]

My 2005 Altima SER 3.5 shifts hard like yours but mine doesn't go over 2000ish rpm and I can go over 50mph? but my check engine light doesn't say I have a bad crankshaft? any ideas on what it could be?

[@marioandmuffin]

Yea it's probably your crank sensor mine does the same thing

[@joelarciniega8431]

+Mario Garcia I fixed it and it ended up bring a ripped wire that went to the mass flow air sensor.

[@chicuvictor1838]

i have same problem with cold start but is stick shift. does this apply for stick shift

[@xOXDJF3RR3RXOx]

same problem with my pathfinder 2010 dealership try to charge me 1600 to fix the engine and transmission and I search on KZbin and I found a couple videos and it was the sensor I get a new sensor on a junk yard cars for just 10$ this video is so hopeful! 👍🏻

[@Mabeylater293]

Glad u were able to fix it and for pretty cheap too! Nice goin man.

[@johnnyboy4444]

This video probably saved me $2000

[@hollyjones2259]

Hey i have a nissan maxima doing the excact thing! Already took it 2 the nissan to get a full diognostic & it says the code for the camshaft sensor bank 2....but alot of other codes are poppn up also ..like the throttle..transmission e.c.t..but i had no issuses at all with none of these before all this problem started with the bad camshaft sensor....did any codes dealing with what i stated happened to you also ?just want to know because the repair shops just want me to spend more money on something that may be caused just by the bad camshaft sensor.

[@mef12727]

Change the 2 Cam sensors first. From experience those sensor affects other parts of the car. You will be fine.

[@shaka861]

my slip and vdc indicators are solid but resets when i turn my car off. what should i do

[@scottbalogh122]

thank you for your video my car is doing the same thing saving peeps a boat load of money thanks again

[@miguelmestanza6776]

Hey i had a lil fender bender not so long ago and my car just started knocking hard when going reverse and a lil hard going to drive. after it warms up it doesnt knock as hard. when i try to park and hit reverse and hit it back to drive than reverse it knocks really hard. people is saying its the motor mount and i just found out this from this video that it might be the camshaft too. cause when i head to work and just turn on my car let it warm like for 30 sec than take off, sometimes it feels as if i accelerate and it quit giving power like it jerks as if i shift wrong. any idea what could it be? i got a 04 maxima se