One piston, small engine, glow engine, power by nitro fuel, more power and speed
Пікірлер: 50
@sencdaarvaarjemee2053 жыл бұрын
wow, you almost got it up to stationary (idling) speed :P
@MaNNeRz913 жыл бұрын
My thoughts exactly 😆 I can idle mine pretty low but race tuned is like 3000rpm roughly hitting 18 to 22k rpm at full chat
@fredrikg9343 жыл бұрын
@@MaNNeRz91 is 18000 to 22000 revolutions per minute is in car top rpm (under load)? Specifications for .21 engine is typically 36000 revolutions per minute (max power). Is this 36000 rpm under no load in a test bench?
@MaNNeRz913 жыл бұрын
@@fredrikg934 actually I was getting my numbers mixed up with racing 2 stroke engines (the petrol ones) they struggle to get past 22k under load. I'm not sure how they record the nitro engines rpm if it's under load or with zero resistance. I remember when I tuned my old nitro car too lean years ago and you can hear them going "supersonic". Amazingly the engine took a lot of abuse with this set up before it finally popped the rod in 2. Does sound awesome when they rev up near their danger limit.
@MaNNeRz913 жыл бұрын
@@fredrikg934 check out my other channel (BIFF RC) I put a video up of my low idling nitro car. It's running richer than usual because it was a first warm up since winter storing run.
@brianbelanger45613 жыл бұрын
I mod these and this is the most useful tool i have ever seen. Excellent video.
@Alan_Hans__3 жыл бұрын
Love this video. Subbed in the hopes of seeing more of this cutaway engine. Seeing what's happening and when gives you a real insight into how these work and more importantly how each of the parts work.
@invisiblespeedrc3 жыл бұрын
go here for that kzbin.info/www/bejne/sH3UqJ1qZrZlj7M
@Alan_Hans__2 жыл бұрын
Love the new cutout video as well but can't comment on it or add it to my "good stuff" playlist as kids mode is turned on for that video. Adding a resistor across the little dc motor might allow you to run the motor better at low rpm's. This would make it easier to see what's happening when. Brilliant.
@aldrinchristianmamino29502 жыл бұрын
Thank you mate.....i all ready turn off the kids mode
@joseantoniosalgadopalacios62903 жыл бұрын
El piston esta al reves el corte de la falda va hacia la admicion
@davidhames3193 жыл бұрын
Doesn’t tell me anything
@hobbycornerkerala3 жыл бұрын
Drill machine attached to shaft ... 😀😀
@markbrennan22433 жыл бұрын
That's so hypnotic@@!
@غامض-ن4ج7 ай бұрын
Explain to me what the difference is between a nitro-powered engine and a gasoline-powered engine ?
@aldrinchristianmamino29507 ай бұрын
Gas engines use spark plugs whereas nitro engines use glow plugs to ignite the fuel/air mixture.
@غامض-ن4ج7 ай бұрын
@@aldrinchristianmamino2950 thank you
@TexasHill Жыл бұрын
The piston is installed backwards.
@RobertoMelo763 жыл бұрын
Dell done! Thanks To share!
@delawarepro35392 жыл бұрын
Does a nitro piston have a ring? Great content 🙌
@cliffgamer78322 жыл бұрын
No
@cassianomartin269911 ай бұрын
It does not have a ring, but some pistons have a goove cut, like a ring, so it fills with oil to help it seal.
@d.haroldangel2413 жыл бұрын
They are in fact GLOW ENGINES. They run fine without nitro. As opposed to SPARK IGNITION engines.
@glowiever3 жыл бұрын
they didn't run too well in pure ethanol+castor oil. the nitro helps cooling it down too I guess.
@d.haroldangel2413 жыл бұрын
@@glowiever Not true, sorry. With the correct glow plug they run very powerfully, perfectly. It's called FAI fuel. (no nitromethane).
@glowiever3 жыл бұрын
@@d.haroldangel241 I'm interested. got a video/articles on that? literally the reason I sold my nitro rc cause nitromethanol is too costly (it's imported). I might get back into the hobby if what you said is true. the last experiment with a friend just didn't end up too well.
@d.haroldangel2413 жыл бұрын
@@glowiever I have been in the RC airplane hobby for 21 years now and only use a small amount (3 to 5%) of nitro in 4 stroke airplane engines exclusively. Nitro helps most engines run better when they are poorly tuned. It is very important to use the correct glow plug (OS # 8 is fantastic on many, many different engines). If you can't find nitro or it is too expensive,I standard glow fuel is a mixture of 80% methanol and 20% castor oil. (known as FAI fuel). Give it a try and I think you will be successful.
@glowiever3 жыл бұрын
@@d.haroldangel241 I just saw a youtuber using 0 nitro. he said that it is important to add compression (removing shims from head) and use hot plug. daaamn I didn't know that. I saw it run just fine, and cost is actually cut down at least 60% which is a kill for me. well since corona there's no track open, might wait till I got a place to play I guess. edit: he also mentioned tuning would be narrow than when using nitro. did you have similar experience?
@cammac13933 жыл бұрын
Piston on backwards
@invisiblespeedrc3 жыл бұрын
nope.
@СашаДмиренко3 жыл бұрын
Как на советской газовой мопеде
@Niko-qd2kh3 жыл бұрын
👍👍
@douglasmurillobarrera74413 жыл бұрын
Dwalt drill
@pointline12563 жыл бұрын
पाणी निकालनेवाली ऐसाही बनाओ जो 1000 फिट तक फेके और 1.5 इनच पाईपसे
@KC-yk5xe4 жыл бұрын
Ganda po
@DKF224 жыл бұрын
needs oil! lol
@ellgwapo.17547 ай бұрын
The! Nitro engine it's aaa litle Bit Rotary disc system Style be'cose by 🤝 the crankshaft.