Though I didn't understand properly how to release nitrogen gas completely for storing longtime breaker but it's good video to have a overview of the procedure. Thanks.
@NPKConstruction4 жыл бұрын
Glad to hear that you found the overview helpful. If you need additional info regarding releasing nitrogen gas, please feel free to reach out to our service department at any time.
@NPKConstruction4 жыл бұрын
service@npkce.com
@NPKConstruction4 жыл бұрын
440-232-7900
@aissaguennona39353 жыл бұрын
I have qoistion .ihave breaker stones (sandvik br3890city) i need to now how mutch présure of gas Can add i have no catalogue no notice pleiz advice me
@cesarvargas80455 жыл бұрын
Question... after 30min working why the Hammer gets hot to a point that stops working?
@NPKConstruction5 жыл бұрын
Hello Cesar, apologies for the delayed response. Please reach out to Carlos in our service department. He speaks Spanish as well. His email address is carlos@npkce.com.
@jacobm45133 жыл бұрын
What is the link for the charging system
@toddromanczuk29327 жыл бұрын
if operating a gh15 approx 8-9 hours a day what would you consider to be fair amount of grease being used by auto greaser g025?
@NPKConstruction7 жыл бұрын
I will check with our service department and get back with you shortly.
@NPKConstruction7 жыл бұрын
Depending on actual duty cycle of the hammer, you should use a tube about every 4 hours. So in this case, you should be consuming approximately 2 tubes of grease per day. The most important thing is to observe a constant flow of grease down the hammer tool. If the tool is shiny, like metal to metal contact, then something needs adjusted on the greaser for additional output. Here is a link where you can find the hammer mounted autolube manual: www.npkce.com/publications/autolube-publications/. Reference page 51 for adjusting the throttle on the greaser to adjust the output of grease.
@toddromanczuk29327 жыл бұрын
NPK Construction Equipment Inc ok I thank you for your immediate response! I did some trouble shooting and found that the greaser unit is malfunctioning. thanks
@NPKConstruction7 жыл бұрын
If you have issues in the future with your greaser or any other NPK product, you can contact our service department directly on our website www.npkce.com, by emailing service@npkce.com, or calling toll free 800-232-8280 and asking to speak with someone in service. We would be happy to help get any issues straightened out!
@KamalMira-ub9rx4 жыл бұрын
NPK Construction Equipment Inc
@hasanhamed32333 жыл бұрын
thank you
@imforme15 жыл бұрын
اصعب شيء بالسعوديه مافي عندنا احد. يعرف له صحيح الا قليل