NO CPU BIOS Flash Back ASUS B650 TUF Gaming Plus Wifi

[@mikesunboxing]

Available from affiliate links: Amazon Local: amzn.to/40kSHqB Ebay UK: ebay.us/SoVWBo Ebay US: ebay.us/tJ2rTl Ebay CA: ebay.us/Uns8uZ Ebay AUS: ebay.us/cCTTwo RECOMMENDED USB DRIVE Amazon Local: amzn.to/3v7P0H4 Ebay UK: ebay.us/nRoDca Ebay US: ebay.us/P9yUZs Ebay CA: ebay.us/LlI9lU Ebay AUS: ebay.us/THwmCj

[@inabuse]

Thanks this helped me test a motherboard while i didn't have my CPU. i feel more calm knowing that it was able to update at least.

[@mikesunboxing]

glad to help

[@guntherultraboltnovacrunch5248]

You're the first guy to explain why the usb should be below 32gb. THANKS!

[@mikesunboxing]

glad to help

[@nawafnawaf742]

@@mikesunboxingif it was 32gb is it fine?

[@mikesunboxing]

@@nawafnawaf742 Yes that's fine 🙂

[@RobbieB2606]

Thanks very much for this - first time builder upgrading from Intel old gen to AM5 - got this exact MB and gave me peace of mind doing this waiting for my new 9800x3d to arrive! Cheers

[@LukBacca]

Just did the exact same thing with my 9800x3d the light is currently flashing fast!

[@mikesunboxing]

hope it all goes well

[@z0_Skillz]

Thank goodness it work, like you said if you already fully set up the pc do not change the files to cap just leave it as is.

[@markosusa5823]

I bought this Mobo + Ryzen 7800x3d today, Thanks for your guide, i will 100% Update bios with this method before putting my Ryzen in. This looks very easy, thank you for detailed explanation.

[@mikesunboxing]

Glad it helped

[@dennishansen4001]

Hi mate, is your build still going strong? :) im about to build the exact same combo ? :)

[@4bodeyt646]

Do u have the 1% low fps drop issue and do u do any tuning for cpu ?

[@sharkey9]

For anyone doing this in a full built system, do not switch on the PC. ONLY the PSU!

[@mikesunboxing]

yep very important

[@chriss2082]

Glad someone mentioned that because I would hate to build a system and have to disconnect all of them cables just to update the BIOS. Except for the motherboard and cpu cables of course

[@letmeecookbroooo]

What so you mean ,I am so confused , do not switch on the pc,what these means?

[@ArsevensX]

​@@letmeecookbroooo don't update the bios while the system is running. Just turn on the PSU. Don't turn on the whole PC.

[@letmeecookbroooo]

@@ArsevensX yup I get it,pc should be off just motherboard should run,ty for info bro

[@imp9ct239]

Thank you Mike should be getting this mobo next week exactly what I needed! I cant wait to try this

[@mikesunboxing]

Hope you enjoy it!

[@ElderBard00]

So excited. Waiting on my new mobo to arrive tomorrow.

[@mikesunboxing]

it is a great board hope you enjoy it

[@ElderBard00]

@@mikesunboxing hope so too. Already got my bios update ready and windows 11 downloading. 👍🏼

[@carsendugat6478]

May be a bit late but if your bios is not blinking that means your partition table on the USB is formatted to GPT instead of MBR (Master Boot Record) that was what fixed it for me

[@mikesunboxing]

great advice

[@INCOGNATIONABLE]

amazing thank you so much, literally saw your other video with another motherboard brand and thought theres no way he would make the video for my exact mobo. Legend!

[@mikesunboxing]

Glad I could help!

[@Senrab46]

Enjoy these bios updates after your tuition should not be intimidating task. Thanks Mike and Kath 🐈👍

[@mikesunboxing]

thanks Nick

[@OlettaLiano]

Hi, Mike. It might be a good idea to leave the EPS cable attached when installing the motherboard. Especially if it's a smaller case. Those can be a real bear to do in a fully built system. I've had to remove top rads and fans more than once, so I've learned my lesson. LOL

[@mikesunboxing]

Good idea! that is the real pain in the ass to wire up

[@WilliamAndrewPhilipBodie]

Mike's How to makes it all a little more easy. on the blood pressure 😀

[@Methodical2]

Excellent step by step.

[@innocence1843]

Thanks Mike! Somehow I knew that you would be the man with the video I needed to fix my PC problems as usual. Cheers!

[@mikesunboxing]

Glad to help

[@TheGM6501]

I was able to fix my computer, thanks! Very easy to follow along

[@mikesunboxing]

glad it helped

[@golfsierrahotel4806]

Why are we still formatting a drive in Fat32, seems like very backward technology when you consider the might of the latest Motherboards?

[@mikesunboxing]

very true. I suppose the BIOS flashback chips are done to the lowest possible cost, so modern file systems are not going to be cheap to integrate

[@golfsierrahotel4806]

@@mikesunboxing agreed, I still think that xFAT should now be introduced as getting hold of USB sticks that support Fat32 is becoming difficult.

[@gametime5726]

So no cpu is needed at all during this process?

[@JustFedzz]

Awesome video mike! This can be quite a daunting task without any guidance, but its fairly less 'scary' with your tutorial

[@mikesunboxing]

thanks, i agree even though i have probably done almost a hundred of this by now it still makes me a little nervous

[@JustFedzz]

@@mikesunboxing deffiently still gotta be cautious every time lol, it's best not to rush too much as you are prone to make more mistakes and potentially mess up your system T-T

[@reck4212]

This guy is a life saver thank you very much for your very helpful video!.

[@mikesunboxing]

Glad it helped!

[@hassangammudi3212]

I updated the bios on MSI H610M-E Pro with 8GB USB while the pc on

[@tmzzlo]

It works with 64GB usb drive just like Mike said it must be Fat32 and there are plenty software to format it ...

[@pieskozrut]

Nice video man. I had a problem with DDR solid amber light after enabling EXPO (ryzen 7600x; radeon 7800xt; 2x16GB Gskill 30; TUG gaming b650m plus wifi). PC booted, I installed Win and all drivers, GPU, etc. Then enabled EXPO. System booted fine, I wanted to go to BIOS to see if RAM is running on 6k and it just went to solid amber after restart for DDR). Fans were running, but nothing else was happening - tired CMOS, reseating RAMs, 1 slot only, etc. nothing helped. Thankfully the flash revived the RAMs. Thank you!

[@mikesunboxing]

glad it helped

[@jos9678]

Hi Mike, Clear explanation, thanks for this. Do you always have to do this with a new motherboard?

[@mikesunboxing]

it is a good idea and good practice to do it as there are security and stability improvements that will make the motherboard better

[@jos9678]

Thanks Mike

[@Ji-uv8pw]

A very helpful video, just saved my day.

[@mikesunboxing]

Glad it helped!

[@kymhaniford]

Thank you Very much for this video. ASUS's website is not very good at explaining how to do this. I spent hours trying to reinstall the bios after a crash never realizing that there was a button to hold to start the process on the IO Panel... DOH!

[@mikesunboxing]

hope it is all working now?

[@Vindettacon]

Is there a reason why you said to do this before building your pc? Is this not something you can do after you build if you find at that point that your bios are incompatible?

[@Vindettacon]

nvm you covered it later in the video. Thanks and well done.

[@mikesunboxing]

yeah i try and make it easy to diagnose any issues

[@luislanuit]

You helped me a lot. Thanks!

[@mikesunboxing]

You are welcome!

[@ultranova9599]

Thanks! This was a great guide and i managed to reset the bios, sadly still stuck with a dram light.

[@mikesunboxing]

Sorry to hear that. feel free to join the discord tech support for more help and advice

[@ultranova9599]

@@mikesunboxing I shall do that now. Thank you.

[@bahtiyor9149]

Hi, Mike.Were you able to solve the problem with the computer boot time when you enabled the EXPO profile in the BIOS?

[@mikesunboxing]

yes it is all sorted now and boots very quickly, i made a video on it kzbin.info/www/bejne/m5nYgYebpsecbac covers all makes

[@JanFarang]

by the way, if you put everything in, chip and so on, and then test it the last time... Does the chip needs cooling at that moment? Or is it ok, because it has no work to do?

[@mikesunboxing]

I would suggest resting the cpu cooler at least over the actual processor just to absorb some of the heat as these cpus can get very hot very quickly

[@SV024]

This video helped me a lot. Thank you

[@mikesunboxing]

Glad it helped!

[@Nodochii_]

Hi Mike! Thanks for the video. I have this mobo and lately I'm getting a lot of blue screens. I have this computer since march of this year and I never update the bios. Should I update it? I dont know what else I can do to fix my pc. These are my other specs: AMD Ryzen 7 7700X 4.5 GHz 8-Core Processor G.Skill Trident Z5 RGB 64 GB DDR5-6000 CL30 Asus TUF GAMING GeForce RTX 4060 Ti 8 GB Asus TUF Gaming 1000G 1000 W 80+ Gold

[@mikesunboxing]

yes update the bios, then turn on EXPO then context restore and also enable memory power down

[@dennisprive9512]

This tutorial is really helpful , what kind of USB do i need for updating the bios? can i use a 2.0 USB or do i need a 3.0 usb flash drive?

[@mikesunboxing]

either should be fine

[@TheAccUnknown]

Thanks for the video! If I have already a USB in FAT32 format, could I use that without deleting the existing content, and just copy the CAP file on it? Or would the BIOS not like that?

[@mikesunboxing]

should be fine as long as the file is in the root of the drive

[@TheAccUnknown]

Thank you so much for the quick reply!

[@Abdullah-ks8yo]

Does this guide also work for the non WiFi Version of the Mainboard

[@mikesunboxing]

yes same principles

[@JanFarang]

Super Mike, this is really smart. This is the way I'm going to do it. After that put in the chip and so on and run it again. That way I'm sure the mobo is ok. So if it fails after I put it in the case I know it's not the mobo, but i did something wrong with the cables

[@mikesunboxing]

Yes that is my preferred method to flash the bios on an empty motherboard at least that way there is no other interference and if it doesn't work it means there is either something wrong with the usb stick or possibly the bios file

[@JanFarang]

@@mikesunboxing ok, so then it's normal I had nothing on the monitor...Flash it again to morrow, and else take out the battery so it can return to the old bios?

[@JanFarang]

@@mikesunboxing found it, everything works !

[@mikesunboxing]

@@JanFarang Good to hear 🙂

[@Pranto_kumar]

Thanks for the most informative video 😊😊😊

[@mikesunboxing]

So nice of you

[@mikegc3816]

Hi Mike, do you definately not need the extra 4 pin connector, I was a bit worried because my PSU did not have one

[@mikesunboxing]

no it is fine

[@mikegc3816]

@@mikesunboxing Hi Mike, just flashing the bios via the bios with the correct CAP file and it started updating then rebooted, but the screen has been blank for 20 minutes. I can see the USB flash drive led is still flashing and fans are still going, not sure whether to power it off - I guess at some stage I will have to.

[@mikegc3816]

@@mikesunboxing Ignore my last message, second time worked

[@mikesunboxing]

@@mikegc3816 Glad to hear that 🙂

[@Dorian5909]

Hello ! Just bought a Asus TUF X670E Plus, the way to install an updated bios in one of these models is exactly the same way ? thanks !

[@mikesunboxing]

yes that is right

[@dennishansen4001]

Hi, I just bought the Asus TUF b650-plus wifi and i was hoping to use a 7800x3d on it, but it worries me that the ASUS boards have had problems with the cpus frying, if i update my motherboard to the newest bios like you did in this FANTASTIC video should i be safe? :D

[@mikesunboxing]

Yes it will

[@dennishansen4001]

Thanks alot mate 😃👍

[@dennishansen4001]

Just did the update, worked like a charm, though the BIOSrenamer named it TGB650PW AND MISSED OUT THE .CAP :D

[@nawafnawaf742]

@@dennishansen4001how did it go , is everything alright ? Bc I have same MoBo and CPU

[@nawafnawaf742]

Hello Mike, I was updating the bios and it took a long time and it did not happen. Should I disconnect the USB cable or the power supply cables first or what? Note that when I named the file with that renamer it appeared without .CAP and I added it manually. CAP now it is solid. What should I do? What should I disconnect first? Is there any damages ? please answer me as soon as you can

[@mikesunboxing]

try without the RAM installed, that sometimes helps

[@youtubecommenter8532]

Why connect the 8-pin EPS? The manual says that the 24-pin power connector is enough?

[@mikesunboxing]

Just something I have always done

[@youtubecommenter8532]

@@mikesunboxing Alright, thanks!

[@jasonkingsbury8727]

I just got this exact board, and I downloaded the latest bios driver TUF GAMING B650-E WIFI BIOS 3024, but the renamer renames it to A5502.CAP and not TG650EW.CAP. Will this work? or why is the renamer not acting as expected? Thank you!

[@mikesunboxing]

only use renamer if you are doing a USB flashback using the BIOS flashback button, if you are undating from the BIOS don't rename

[@unimposings]

comes the board with a BIOS pre installed, or do i need to install the bios like you show in the video?

[@mikesunboxing]

it will have a bios on it but it might need updating depending on the processor you are planning to use

[@valentynhrushkovskyi7695]

I have already build pc, but have not start it yet, do I want to do this step first before installing windows?

[@mikesunboxing]

if you are able to install windows do that first

[@therealjackfisher]

Thanks BRO! Just what I needed.. PERFECT!

[@mikesunboxing]

Glad it helped!

[@JanFarang]

hello mike.... few problems. I build it all, but when I flashed the mobo it blinkt a few times and then green....20 sec... so I think he did not recognize that stick? Anyways all the fans, work only three of them no rgb... but.... I put in a hdmi with monitor... and nothing !!!! Shit... any tips?

[@mikesunboxing]

This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels

[@Staff708]

Pressing that button was next to impossible on my Prime B650 Plus. Should it blink or is it just being on fine as well? It blinked at the beginning but now it's just there

[@mikesunboxing]

it should blink for about 5 minutes. Solid means it has either ended or failed

[@dougl9758]

@mikeunboxing Thanks SO much... Using the same motherboard, and have updated the BIOS per your directions (it worked). Installed CPU and RAM (chosen from ASUS approved list), but the Yellow DRAM led remains when I power on the MB.... (2 G.Skill F5-6000J3238G32GX2-TZ5N; 2 X 32GB) Wow - does this mean I've got a DRAM issue, or do I advance to include the SSDs and such to see what comes of it? Sad to think this "pre-check" leaves me failed already ;-)

[@dougl9758]

Or does this DRAM light being on meaning that's as far as it got (e.g. could not progress to VGA because there is novideo card /etc)? Less than clear for me...

[@mikesunboxing]

try one stick of ram at slot 2 and see what happens

[@dougl9758]

@@mikesunboxing Thanks - tried that; moved this to your (awesome) Discord Tech Support 1. Again, very appreciative of your channel and support 🙏

[@dougl9758]

Resolution (just to close this out). I moved question to Mike's *awesome* Discord (Tech Support 1 channel), and summarized solution there. In short, I didn't wait long enough for the self-test to complete and actually complete and validate the DRAM. And, the lack of a CPU does NOT immediately trigger the associated red Q-LED... it would I think eventually, but it doesn't start there. Thanks Mike for patience and supporting the community here and on Discord.

[@mikesunboxing]

@@dougl9758 Glad it got sorted out for you 🙂

[@Identifyization]

checked this mobo i received, it shipped with bios 1811, is that one safe to boot with a 7800x3d?

[@mikesunboxing]

yes but i would update it anyway for logofail

[@hdckdsadd]

what happens if the power cuts off during flashing?

[@mikesunboxing]

you should be able to start again

[@1TZAH]

my Z790-Plus does not have the bios usb, will I be able do update without a cpu? I bought a 14 gen intel so I do not know if I will need a 13 or 12gen cpu to update.

[@mikesunboxing]

looks like you will need a 12th or 13th gen cpu to flash it

[@1TZAH]

ty!@@mikesunboxing

[@spudnic5849]

Mines flashing for a a minute of so then goes solid!

[@mikesunboxing]

that means it can't read the USB or maybe the file

[@spudnic5849]

@@mikesunboxing yeah it didnt rename it with the .CAP so i thought id do it manually and it worked somehow lol.

[@titusyoung141]

Mine goes solid too how did you fix it?

[@mikesunboxing]

@@titusyoung141 This might help problem solve your issue: kzbin.info/www/bejne/hWmwqIljaNSKsLs if you need more help feel free to join our Discord: discord.gg/kG4rrps

[@titusyoung141]

@@mikesunboxingthanks I got it worked out

[@mikebaker2927]

As far as I’m aware, you only need the motherboard 24pin cable. You don’t need the cpu power because there’s no cpu to give it any. I wish all motherboard’s came with this feature.

[@mikesunboxing]

good point, The ASRock and NZXT boards say only the 24 pin, you might be on to something there

[@mikebaker2927]

@@mikesunboxing all other videos on this subject only use the motherboard power.

[@Eujejfifkejshcifkoe]

Am i download the bios and everything whilst running the new cpu on the old motherboard because i dont think you can access the internet without a cpu so how do you downpoad the bios

[@mikesunboxing]

you need to use another pc or laptop

[@Eujejfifkejshcifkoe]

@mikesunboxing is there another way? Because I do not have another pc or laptop... Thanks for the fast reply btw I appreciate it

[@darlissoncarvalho3897]

Hello my friend, I have a problem with the motherboard, I updated to the latest bios version and now it doesn't recognize my dedicated video card, I tried to downgrade it, but I was successful, can you tell me another way I could go back to the bios? factory or the latest bios it was in?

[@mikesunboxing]

you could flash an older version on it

[@darlissoncarvalho3897]

@@mikesunboxing I already tried to do this but he is not accepting , I checked the option that it asks to check in the bios and still nothing 😭😭

[@PiMi91]

i have an Asus Prime x6570e Pro Wifi but i can only update via flashback (system works normally and i can go to bios already), otherwise if i try with ez flash as soon as i press ENTER to read the file and confirm update, the system shuts off... any advice? im writing this almost everywhere and i can only find few post on reddit and asus forum but no luck in finding the solution...

[@mikesunboxing]

that sounds very odd, i would be thinking about an RMA on that

[@SBMotoZ]

Does the USB stick have to be in MBR format? Or does it matter Thanks !!

[@mikesunboxing]

yes it does and FAT32

[@dennis2323]

Kinda need some help! I build my pc, turned it on and got a post. But then, I turned it off. And started to follow this instruction video. I accidently downloaded the wrong bios so the ligt didn't flash, but turned solid green. Figured it out, downloaded the correct bios and after a couple minutes the light stopped flashing. Plugged everything in correctly, started the pc. Fans are spinning the motherboard BOOT LED is green. But there is no display output. My screen just doesn't recognize anything. (My keyboard seems to be working, since the LED's are on. Anything I can try?

[@mikesunboxing]

if boot is on your pc works the problem is the gpu cable or the monitor

[@dennis2323]

It seems so. Thing is, i just tried a diffferent hdmi cable AND a different monitor. Both gpu and MB outputs give nothing.

[@dennis2323]

I reset the cmos. Now it's working fine.😅 Thx for the reply! Much appreciated.

[@mikesunboxing]

@@dennis2323 Glad you got it working 🙂

[@Sebastian9.10]

I cant choosefat32 only NFTS and exfat, my usb stick is 64gb but my entire build already ''works'' (if i shut down the pc and restart it it always boot into BIOS)

[@mikesunboxing]

it will boot into the bios if there isn't a windows install disk

[@sebas7083]

@@mikesunboxingwdym by window install disk? Because I’ve installed and logged into windows used a key and setup everything including apps and games so I don’t understand

[@1rafakratos]

Perfect content 🫵🤝

[@mikesunboxing]

thank you very much

[@Jpizer1]

so im following everything exactly as soon as the light stops flashing it goes to a solid green light. Any reason why

[@mikesunboxing]

how long did the light flash for? a few minutes it probably worked, a few seconds, it can't read the USB or the file

[@rodneyabrams26]

Does anybody know if he continued the build for this particular motherboard?

[@mikesunboxing]

used in a few livestream builds

[@mikesunboxing]

and was my daily driver in the stream PC for months

[@NerchYT]

Do I still need to update the bios of this motherboard when I have the 7800x3d?

[@mikesunboxing]

i would

[@patricklebel1141]

wow.. 100000 is coming !

[@mikesunboxing]

10 days i would say

[@stbxviiyt5453]

Can’t seem to get this to work followed all the steps. I’m trying to get tcp 2.0 to turn on and I assume it’s to do with the bios

[@mikesunboxing]

what is tcp 2.0?

[@mrbrown2198]

How do i check if its actually worked when i boot up for the 1st time

[@mikesunboxing]

If it boots it worked if it doesn’t it didn’t in a very simplistic sense

[@ibiza5175]

It shows me the red light on the CPU. Can I flash the bios knowing that I have connected the RAM, the graphics card and the CPU? Answer me as soon as possible please

[@mikesunboxing]

yes you can

[@pain1427]

Is this same thing u gotta do for the asus tuf 670e plus wifi

[@mikesunboxing]

yes it is

[@_Akrex]

I've tried 3 different usb , but it doesn't seem to work the light keeps staying green :(

[@mikesunboxing]

solid green? or flash a few times? solid means a fault in the build somewhere or a short

[@indigo4438]

Good job! 👍

[@mikesunboxing]

thank you

[@xiaoyuwang2549]

i followed all the steps. but the light is keeping green after flashing like 5 seconds. it is kind of weird. any solutions?

[@mikesunboxing]

try another USB drive or check you have the right BIOS, the WiFi and non WiFi version at not interchangeable

[@mst.sharminsultanakona]

Great. Your Content is fantastic, but Out of 100 that’s SEO score 73.

[@mikesunboxing]

thanks, i'll look into that, tubebuddy sucks sometimes

[@silvermans1336]

Para ser honesto, a mi este método no me funciona muy bien, lo que yo hago es instalar todos los componentes y después instalar la bios, no se si solo me pasa a mi!! Saludos!! 😁

[@MultiHeywatsup]

What does the flashing green light mean?

[@mikesunboxing]

it is an activity led if you are referring to the one near the bios flashback port

[@MultiHeywatsup]

@@mikesunboxing yup that's the one. It just blinks 5 times slowly and then does a double blink. And keeps doing it perpetually while pc not turning on. I tried the bios reset but nothing happening. When I insert the pendrive the light starts flashing quickly and keeps doing that even after holding the button. But this is a 3.2 gen usb. I'll try with a 2.0 usb and maybe that might wokr

[@GamingMaster4386J7C]

Anyone running this recently released bios update 3057? Any issues or is it safe to run it? Please share your input here if you have the same motherboard as me and mike here. It's hard to trust asus these days after seeing the stuff their pull. Mike are you running the 3057 by any chance?

[@mikesunboxing]

not tried it yet sorry

[@codalej1998]

I tried today ... i must go back on bios 3042 ram not loaded .... very risky cuz my fllashback light is broken (not stuck) still blicking (Problem is my flashback light still blicking after turning PC off... i cant turn on it only by PSU and Power buttons same time)..after update i turn off PSU after 4:15 minute when fast light stoped

[@Slaay_K]

THANK. YOU!!!!!!!!!!!!!!!!!

[@azooz190]

Does that apply on rog strix b650-a ?

[@mikesunboxing]

should be the same principle just a different bios file

[@azooz190]

@@mikesunboxing thx ❤️

[@normboy8376]

can i usb the thumb stick while on mac

[@mikesunboxing]

that should be okay as long as you can format it and rename the file as per the video

[@Notmyfruit]

Mike told you how to flash it, i will tell you how to be successful about it. If you have any tuition, mortgage or bank loan and have a fear of something will go wrong and brick the motherboard; it will. They smell fear and stress and when it detects it is done and gone. Be relaxed, hell even threaten it by pouring a glass of water on it. Go do your laundry or cook your potatoes, dont care about update. If happened to be a lighting struck to your house, let it be! Just dont care! If you felt this way you will ve successful.

[@mikesunboxing]

lol thanks for the motivational pep talk

[@SAMZIRRA]

this is so funny because it’s so true and I’m pretty sure that 90% of the people that are watching this right now I’ve all gone through it. I truly feel bad for my neighbors who have had to listen to me scream from the upper floor of my house for three hours who eventually came over to make sure that the police didn’t need to be called because I was murdering someone I said, unless you can get me Bill Gates and whoever created Asus there will be no murdering today

[@SteppingR]

egal wie lange es dauert ....wartet bis das licht ausgeht :D

[@juancanavaro]

Thanks!

[@mikesunboxing]

No problem!

[@Emperor095]

I did on two motherboard and both of them are dead and no way to recover it 😔

[@mikesunboxing]

you are doing something very wrong there i think, you should be able to recover a bad flash using bios flash back

[@Emperor095]

@@mikesunboxing I have tried everything thing to recover but it didn't work F.Y.I I have flashed without ram and cpu out of the box as it is but it caused motherboard brick The only choice is to reprogram bios chip

[@mikesunboxing]

@@Emperor095 sorry to hear that, seems a lot of that going on at the moment from the stories we are hearing on the Discord

[@dolya0231]

tnx u!

[@bahamut12th]

I could kiss you my friend I was going insane till I watched this video, at least now I'm booting

[@mikesunboxing]

glad to help

[@bahamut12th]

@@mikesunboxing now i just have to figure out whats wrong with my sound

[@Augustine2453]

Been trying this for hours and its not working

[@mikesunboxing]

This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels

[@rhyzaum]

Can it work if my CPU is on the motherboard ? I have a DRAM lighting up on this particular model and i'm trying to update.

[@rhyzaum]

ah he said you do not have to have bare board i was not yet arrived yet :)

[@mikesunboxing]

DRAM light is either faulty or mis installed ram

[@mikesunboxing]

maybe ram training

[@rhyzaum]

@@mikesunboxing thanks for the response I was able to boot with only one ram using two no matter the setup (A2 B2 / A1 B2 ...) doesnt work